Quote from: keepersdungeon on May 31, 2015, 10:13:40 AM
http://www.magiclantern.fm/forum/index.php?topic=3904.0
Thanks SOO much! That scared me!
Etiquette, expectations, entitlement...
@autoexec_bin | #magiclantern | Discord | Reddit | Server issues
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Show posts MenuQuote from: keepersdungeon on May 31, 2015, 10:13:40 AM
http://www.magiclantern.fm/forum/index.php?topic=3904.0
Quote from: Walter Schulz on May 30, 2015, 06:18:53 AM
Format card using cardreader.
Format card using cam.
Copy Canon's firmware 1.1.3 to card.
Run firmware update from canon's menu.
Delete Canon's FIR from card.
Copy extracted nightly build content (for firmware 1.1.3) to card's root.
Run firmware upgrade.
Quote from: nikfreak on June 27, 2014, 10:18:03 PMunless you have your heart set on that specific one B&H has a few nice 7D's and 5D2's at a great bargain..If i can sell my 60D or my NX2000 i might grab one!
Got my 6d delivered but had to send it back immediately cause battery and battery door cover were missing. 6D had been sold as almost new to me but looked like crap when it arrived. hopes were high. price was to good to believe. Got my money back now and looking for another used one as I cannot spend money for a new one. Have to spend what i got from selling my Nikon D7000 equipment.
Quote from: a1ex on June 22, 2014, 06:10:13 PMLike I said before I know almost nothing about programming!! If you or someone can set up the files in whatever way (commenting out?) and allow me to download them, also provided someone can remind me the command process to compile it I will run whatever tests you need on my 6D! or If someone can compile it for me, even better!!!!!
Source code compiles cleanly now if you disable FEATURE_FPS_OVERRIDE (which is broken, to my knowledge - https://bitbucket.org/hudson/magic-lantern/issue/1975/6d-fps-override-creating-mangled-colors ). You will also need to comment out FRAME_SHUTTER_BLANKING_WRITE in consts.h.
Before resuming the nightly builds, I would like somebody to compile the code, run the stubs test (Debug menu), and post a screenshot of the Free Memory dialog. And, of course, some general checking to make sure the port is not totally broken.
If nobody volunteers to fix FPS override in the next two weeks, I'll resume the nightly builds without this feature.
Quote from: Apon on June 26, 2014, 12:49:09 PMare you sure your selecting 6D from the dropdown? but just in case, you know where you said you ran firmware update and then waited 30 secs!? if you wait those 30 sec, it uninstalls ML!! WHEN IT SAYS UPDATE COMPLETE AND YOU SEE COUNTDOWN, REBOOT AND SEE IF THAT WORKS!!
Hi erox76 and a1ex,
I dont know what is I am missing.
1. There is no such build with the name of Date: 2014-05-21 18:37:47 -0400.
2. I looked very heard and didnt found any build with extension of -0400, sorry.
3. Closest and latest build I have downloaded Date: 2014-05-22 04:37:47 +0600 and Date: 2014-05-21 04:37:48 +0600. I have tried both.
4. I followed the steps as a1ex wrote in the beginning of this post.
a) format my card in my camera
b) insert card in my Mac.
c) Copied all the files (2 files+1 folder) from the build.
d) inserted the card into my camera
e) update firmware. Green menu as a1ex shown apperad on the screen. wait for 30 secs according to the screen instruction
f) restart camera
g) hit the trash button.
Nothing happened.
I have tried with both the builds. But it was same result all the time.
Am I doing something wrong?
My card : scan disk extreme 45MB/s, class 10 , 32 GB
My laptop : MacPro
Camera : 6D
Please help me I need to be success to install this.
Best reagrds.
Apon
Quote from: VideoDude65 on June 25, 2014, 05:09:22 PMApparently so.. I believe this is due to the write speeds to cards is capped at around 40-50 mbs on the 6D! If they put CF cards instead of sd...no problem
Is it true that I can't shoot 1920x1080 in raw?
Quote from: Museicmn on June 20, 2014, 10:05:08 AMI finally got around to playing the raw video functions and having issues as well as not being able to find mlv_play Module anywhere, did this become unstable and get removed?
Very sorry if this is answered somewhere else, I just can't find the answer anywhere, I have searched all over these forums and Google in general, it's regarding mlv_play. Everywhere I read I find to view RAW video files in camera I need to load the MLV_Play module, but I can't find it in the build I'm using. Even under the forum post "Canon 6D raw preview on DSLR", someone advises to find that module and turn it on, and the other user thanks them for the advice, he doesn't say he can't find it.
I'm using the nightly build from May 22, "magiclantern-Nightly.2014May22.6D113" the modules that I do list are -
6D_113.sym
arkanoid.mo
autoexpo.mo
deflick.mo
dot_tune.mo
dual_iso.mo
ettr.mo
file_man.mo
mlv_rec.mo
mlv_snd.mo
pic_view.mo
raw_rec.mo
silent.mo
No MLV_Play anywhere. Advice? Thanks so much.
Quote from: Apon on June 25, 2014, 06:23:50 PMthen your not looking hard enough that was copied directly from the page!!! When I click show older builds, reading down the list Date: 2014-05-21 18:37:47 -0400 is the last stable build for the 6D!! But when you download it the file will say its from may 22 magiclantern-Nightly.2014May22.6D113.zip
Dear erox76,
There is no such build that you have mentioned. Only build I have found close to your date for 6D.113 is
Date: 2014-05-21 04:37:47 +0600.
Am I missing something important. Please help.
Best regards.
Quote from: Apon on June 25, 2014, 08:33:10 AMQuote from: a1ex on June 25, 2014, 07:29:32 AMafter you click the button...it will say build failed...first button on right says show older builds, Just keep hitting that until you find a build that did not fail... which will be Date: 2014-05-21 18:37:47 -0400 which i have been running without issue!
@Apon: http://builds.magiclantern.fm/ (take a recent build that did not fail)
Sorry a1ex for bothering you again and again. I have found the followings when I tried to get the recent build. Any hope or any other link you are mentioning for me?
"Select your platform:
Latest Build
This Build Failed!
Built on: 2014-05-24 04:37:54 +0600
Changeset: "
If i get the full link with steps I may be lucky with my 6D and ML. Pls help.
Best regards
Quote from: a1ex on June 24, 2014, 05:16:04 PMSo we no longer need that long drawn out TL install process? and it will make the card bootable? that's sweet ok...I will mod my posts to reflect
You did not install ML. Please follow the instructions from the first post of this thread.
@moderators: please remove the references to old install guides, because they only serve to create confusion.
Quote from: AeroGirl on March 03, 2014, 09:27:38 AMI was reading somewhere about the 1.1.4 firmware upgrade and there didn't seem to be any real changes other than removal of third party battery support! So you can only use official canon batteries! So i don't think anyone here is bothering with it yet!
I posted the following over on the 6D - Install guide and Raw Shooting thread, just thought I would post it here to, with the added question, will the special updater file to dump the firmware, dump a copy of v1.1.4 of the firmware that I have on my new camera so that I can re-install that version if I start playing with ML on v1.1.3?
Also, although my time is rather limited at the moment, I would be happy to help out with development of ML for the 6D.
Anyway, here was my post on the other thread just for background (rather than re-typing).
Over the week end I got my new Canon 6D, lovely camera, and a nice upgrade from my 60D with it's Full Frame sensor.
Now I love Magic Lantern on my 60D, I use it mainly for the Intervalometer, and advanced bulb timer etc for time lapse photography.
I was hoping to put ML onto my 6D, and looking at the instructions you need to downgrade the firmware to v1.1.2 first, which I have no problem with, except that my Camera has come with v1.1.4 of the 6D firmware. From my searching it appears that v1.1.4 has yet to be released by Canon, I have been unable to located that version of the firmware anywhere to download, so I am a little reluctant to downgrade to v1.1.2, since I will then not be able to go back to v1.1.4 until it is released officially.
So does anyone know how to backup the existing firmware, and also if ML will work with version 1.1.4?
Quote from: Audionut on June 23, 2014, 06:32:13 PMok i am on my 6D now, magiclantern-Nightly.2014May22.6D113..in photo mode, on the movie tab...and I have 2 options for raw...are your Raw modules turned on, mlv_rec and raw_rec? and yes they should show in the ML menu regardless of mode!
Are you sure? Is this specific to the 6D? On my 5D3, when correctly loaded, the raw video option is shown in the menu, with help text that states it only works in movie mode.
Quote from: VideoDude65 on June 23, 2014, 04:36:35 PMThey show in the main list not in movie tweaks! Should be the 2 just above tweaks.
I'm pressing the Trash Can button to open the ML menu. I selected the ML Movie menu. Then I selected Movie Tweaks. The RAW feature does not appear. Yes, I installed the module and rebooted the camera.
Quote from: VideoDude65 on June 22, 2014, 11:00:15 PMare you hitting the trash can to access this menu or the menu button? also did you enable the module first then reboot as well?
I have install build 2014-05-21 17:37:47 0500 as per your instructions. Under the ML Movie menu I do not a Raw item.
Page created in 0.091 seconds with 14 queries.