Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - wenen

#1
Tragic Lantern / Re: Bit rate investigation
December 23, 2013, 04:51:15 PM
1% we want a tragic lanter christmas gift to 600D :)
#2
Quote from: 1% on December 09, 2013, 08:26:52 PM
FPS is very likely to do it especially at reduced FPS. Digic V alternates FPS somehow and I think its to reduce load on the sensor... otherwise why

Ok, fixed it.. its still recommended to load configs (but bitrate-5d3 doesnt work!), they are in this thread. You can probably just do fixed QP tho since its CF and all, read the other posts.

http://www.filedropper.com/magiclantern-tragic2013dec095d3113

This build is only for 5D mark III? You have any new build for 600D and new settings?
#4
Raw Video / Re: 600D raw video wierd dots
December 02, 2013, 07:46:01 PM
Quote from: a1ex on December 02, 2013, 07:03:02 PM
These are two unrelated problems.

Upload some DNGs.

Here is a DNG using your raw2dng_cs2x2_whitefix.exe you can see its still very much green dots https://www.dropbox.com/s/h4zs6vn605qnuco/000000.dng
#5
Raw Video / Re: 600D raw video wierd dots
December 02, 2013, 06:49:14 PM
Quote from: gary2013 on December 02, 2013, 06:30:07 PM
Go to the thread, Pink Dot Remover that I just showed you and we also talked about it in the thread, EOS M ** Alpha 1 ** [FIXED][DOWNLOAD]

The raw2dng_cs2x2_whitefix.exe works too? Have you try it?
#6
Raw Video / Re: 600D raw video wierd dots
December 02, 2013, 06:23:56 PM
Quote from: dmilligan on December 02, 2013, 05:25:43 PM
asked and answered many times: hot pixels

please use the search feature or just read the relavent raw video threads for more information and how to remove them

I don't know the name of them, how shuld I search then?
#7
Raw Video / Re: 600D raw video wierd dots
December 02, 2013, 04:36:22 PM
No one know?
#8
Raw Video / 600D raw video wierd dots
December 02, 2013, 02:32:33 PM
Hey

I why do i get wired green/red/blue dots in my video when shooting raw?

Watch in 720p/1080P here:
#9
Quote from: Scipione205 on June 29, 2013, 01:04:12 AM
I didn't udnerstand what't this 'old build' you're talking about, and what are the reccomended settings?

Old: https://bitbucket.org/OtherOnePercent/tragic-lantern Settings: 25p, sound on,CBR 2,0x, DblockA/B -6,-6, picqPC 0, GOP3, JP Slice 87, Slice Lock: Enabled, MinBR :80, Max:125, Drop By 1: 85, drop by 3: 100, Taper rates: enabled

New: https://bitbucket.org/OtherOnePercent/tragic-lantern-2.0 This one have RAW
#10
I just want to say that the old build with Slice 87 is awesome, 120MBs with sound on!

F*** RAW. It is not working good on 600D anyway and to big file size to have on a computer.
#11
1% is it easy to go back to the old build from the new one?
#12
How many frames can you film? I can only do 71 frames then it stop
#13
Any recommended settings for RAW with SanDisk Extreme SDHC 45MB/s 32GB card?

I have try 1280/720 25p its laggy
#14
What is lv_rec?

I can't find in the new meny how to set the camera to slice 87. Where can i find it?
#15
24p RAW on a 5D mark III (Magic Lantern) http://www.cinema5d.com/news/?p=17898#more-17898

Will it work on a 600D?
#17
Quote from: 1% on February 23, 2013, 04:06:41 AM
Not dead just H264 is at max on 600D. I could use help from driftwood on figuring out how to play back the 4x4 transform videos, I can't decode them.

Next step is MJPEG with custom buffer sizes to stop moire, etc.

Good job! work on :)

Btw what is EOSMovieFixer.exe?
#19
Watching my difference test.

200% zoom


#20
Quote from: 1% on December 20, 2012, 12:58:51 AM
I have no GH2 (so can't compare) but Q87 in crop mode is camera max. Can't really do anything else to improve quality, just need a fast card to handle what is there. The only other improvements won't be H.264. As shown above, canon cameras are missing most encoder tweaks/settings even on 5dIII/6D/M.  With UHS-1 on 6D and similar slice QPD functions we'll see what DigicV can do.

Ok I have my camera at Q87 and gop1 now. Shuld I use CBR 3.0x or VRB -16 settings?
#21
Quote from: 1% on December 13, 2012, 04:10:44 PM
[quote[So what settings do you recommend for the 600D now?[/quote[

If you're shooting built in audio. You have to go back to stock gop. If you're shooting just video with audio off you can use whatever you want like gop 3, etc.

Btw one more question: Do you have any new setting for the 600D to max out the quality? Have you done any comparison to the GH2?
#22
Quote from: 1% on December 09, 2012, 03:38:09 AM
Found a side effect of gop changing.

Canon has a sync function when recording with audio enabled. If gop is changed sync makes an overrun error and then error 70s the camera. So if your recordings w/audio are erroring, turn gop back to default of 12 or 15 or 30 depending on fps. Don't know if can be patched out yet. Maybe also related to separate wav sync issues? Does this apply to 7d too?

So what settings do you recommend for the 600D now?