Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - elmatambre

Pages: [1]
Camera-specific Development / Re: Canon 650D 1.0.4 [Status: Alpha]
« on: September 14, 2013, 04:29:04 AM »
Sell your 650D body, buy a 550D, stop complaining.  Doesn't have to be in that order.  If audio is so important that you come on every week or so to complain about it not being implemented, fix the problem yourself. Become a dev or buy a new camera.
Just because you don't think a feature is important doesn't mean that no one thinks it is important.  For what I do, I don't care about audio.  I'd prefer there not even be audio because I just have to remove it from every clip. 
The audio problem is much bigger than you think.  The devs aren't just holding it back for fun.  If I understand it right, the audio chip for the 650D & EOSM work completely differently from previous cameras.  Not just a different chip, but the code interfaces with it differently.  For the non-developer, that means it is a huge departure in how things are done.  It is not just finding out where the different registers are located, but what to shove into those registers to make things work.  There is work being done on audio, but it is not a simple problem as you seem to suggest. 
Nobody really cares if you are terribly disappointed that a free product hasn't implemented the one feature you care about.  There are others who want this feature as well and they also state their desire for this feature without the dramatic complaining.
Yes, I'm in a bad mood today.

me something I can add to this but if the problem is the audio for you, the solution is easy. It adds a microphone zoom1 or other like that starting from 100 uss
And besides you have to have a little more respect for the arduous work that boys do Magic Lantern

Camera-specific Development / Re: Canon 650D 1.0.4 [Status: Alpha]
« on: September 06, 2013, 05:13:03 AM »
Hello Iam very happy using this ML Alpha and NOW i like to used the dual iso ... I can read that in this forum. But I can found in the ML Menu. Can you help me to do that. Thanks

Camera-specific Development / Re: Canon 650D 1.0.4 [Status: Alpha]
« on: August 21, 2013, 05:09:39 AM »
Hello i read this Forum every week And i work in my camera the ML work very well. But now i have a problem in this week, I could not use the magic lantern on a card that I had stored there. is an extreme pro 16gb san disk in write speed 45MB (says on the card). Now in the 1.0.1 firmware version could use but since the software update of the camera, I could not use it again since that card. I have another Transcend 16 GB Class 10 that still works on camera with ML. Can this be so? Am I right or possibly make a mistake. I have two nights after returning from work trying to fix so I ask here in the forum..

Archived porting threads / Re: Canon 650D [Status: Alpha]
« on: July 17, 2013, 05:22:31 AM »
were can i download the latest test build?
in this post the page 1 the link to dropbox... in this link click and you can see the last test builds

I am reading twice a week the last post of canon 650D. Hope that helps. rubirosa007

Raw Video / Re: RAW on 650D / 700D?
« on: July 09, 2013, 06:19:56 PM »
i have problems too with the same card my card is original and new from extreme pro 16 gb 45mbs... but i read now this topic to understand what is my wrong settings in the camera or not...

Archived porting threads / Re: Canon 650D [Status: Alpha]
« on: June 10, 2013, 01:18:57 AM »
thanks i am very happy. ML is running in my camera T4i  : ) ... ;D its a happy end, in this weekend...
Its a happy Sunday!!! yauuu

Archived porting threads / Re: Canon 650D [Status: Alpha]
« on: June 08, 2013, 10:28:49 PM »
I'll be locking this thread and opening a new one ASAP with proper instructions :)

Hi i hope this new one ASAPtopic with the instructions to install the alpha!!! To my canon T4i. Thanks. I follow this post since I bought my camera in August last year. And now I read every night when I got home the post to see what's new for 20 days. Thanks for such good work. I am very happy, and hope to install the alpha  ;)
Thanks Nanomad for your hard work.

Archived porting threads / Re: Canon 650D [Status: Hello, world!]
« on: January 27, 2013, 11:32:38 PM »
please i have a problem.  i can understand. i have my t4i and 2 memories but i test that: I try to write a update firmware to the lens 40mm canon STM. But i can. The mesaje say the disc is write protected. I hope to wait for ML to my camera but now have that problem. I ask this here and to the seller. But the seller there does not know which is the problem. Please tell my Where I can post this question inside the site. And the switch isn't the problem. the switch to lock is unlock. thanks

Archived porting threads / Re: Canon 650D [Status: Hello, world!]
« on: December 26, 2012, 11:22:27 PM »
Hello Merry Christmas! Please tell me nanomad, when you say "In the meanwhile you can already compile ML for the 650D yourself and do some tests too." I have a question... i download the ML version 2.3 and run in the camera? or first update the firmware to this camera 650D? and then run the ML 2.3??? (or use another update to this camera)
I am impatient. I cannot expect to prove it ... I tell you Nanomad that if you disconnect the touch the battery hard mas there is difference.
But i dont have experience to installing firmware ML. I am learning for this way

Archived porting threads / Re: Canon 650D
« on: December 07, 2012, 02:43:53 PM »
woaw. that is fantastic news.
best of luck !
you have a whole bunch of fans supporting you ! please let us know how we can help (fw dump, tests, etc.)

yeah i hope you make that soon ...  ;) ;) ;)

Archived porting threads / Re: Canon 650D
« on: December 04, 2012, 03:43:16 AM »
i like this "May the fun begin" i have a expresion in spanish in my country whit my friends is "capoooo".  ;) I'm happy

Archived porting threads / Re: Canon 650D
« on: December 04, 2012, 03:39:54 AM »
I am happy to know that soon begin with the 650 ml. I also rush to choose the 650 without knowing that ran the ML. I already made a small donation for a while and just hoped

General Chat / Re: What camera are you running ML on?
« on: November 07, 2012, 01:30:55 AM »
i have a 650 canon

Archived porting threads / Re: First alpha version for 5D Mark III is ready!
« on: September 28, 2012, 03:43:38 AM »
hello i donate yesterday but i have a question ... please wen do you make the firmware to the t4i? please tell me because i have a sword of damocles ... i proving a camera t4i chose these or the d60? whats is better ... whit this ML... Im sorry if mi english is not good. im speak spanish and i try write in english... thanks for you work... :)

hello iam from Argentina I have the canon t4i or 650 too and i have the lens 40mm stm is a good lens. I like test if you have a beta version of ML.

Pages: [1]