Messages

I had the same problem with the BMCC footage... Capture One 7 gave me the best results in DR without any flickering (maybe can appear halos if you push the DR to the limit). But at this moment i think that its imposible open the ML dngs into Capure One 7.

Try this build. https://dl.dropboxusercontent.com/u/13314708/dd53ca8bbeab.zip

and red this thread http://www.magiclantern.fm/forum/index.php?topic=5419.0

I have the same problem than Iopsis

Please describe the problem with as many details as you can.

I was shooting trying the new ML 2.3 (ML has working fine) but accidentally i turned off the camera and i remove the cf card too fast i think. I forgot the camera for a while (maybe 1 or 2 hours). When i came back the camera doesn't boot. I removed the drained battery and i putted a fully charged in it. Then the led blinks. I tried with a different card, with a formatted card the led doesn't blink but the camera doesn't boot... I tried formatting the cards, installing a clean version but nothing. The camera seems fried and without a card doesn't boot anyway.

That blink means wrong firmware version.

What happens with a formatted card?

Nothing happens. The firmware version was 2.12. Is there any possibility to do a hard reset to the factory defaults of the camera with an autoexec.bin or something? Thank you

I tried with different and fully charged batteries. Without a card doesn't boot. With a ML card the led is blinking at the moment that I close the battery cover before i turn on the power button. You can see in the youtube video.

Format the card and read the install guide.

And this: http://www.magiclantern.fm/bestpractices

And think twice before scaring people, there are more polite ways to ask for help.

I only can format the camera with a car reader. The camera doesn't boot from anyway. I tried everything on the guide. Simply, i removed the card so fast and i forgot the camera. The battery has drained but the camera won't boot anymore...

I formatted the card, the camera does not start, but the LED does not blink anymore. Without a CF card the camera does not start again... please help!

my 5d is dead

i tried everything with different cards and batteries... My 5d is bricked. Anyone can help me?

few hours ago i think that i retired the cf just when i turned off the camera. I forgotten it with the battery in. When i came back the camera doesn't work anymore...