Messages

Here it is the uploaded failed file:
https://mab.to/1jL5Og0hj

Yes  I am uploading the file right now, it´s 12gbs heavy, so.. It will be uploaded in some hours.

This is the comparision print screen of raw2cdng

https://s29.postimg.org/e6fqjnut3/trying_recovery_RAW.jpg

*First image is fail file.
*Second image is failed file concatenated with 00 bin file
*Third one is an image of a successfully raw taken in the same place.

I will send the link of the file when it gets uploaded.

Thanks a1lex!

Iam using ML Ver: nightly 2015 apr. 28 5D3133.

I have (in total -3 cards-) recorded 82 files. 70 successfully recorded, and 12 failed.
Camera never crashed. It was stopping without error, with some exceptions that the camera stopped by itself while I was using FAT format.
It gives me 3 ".r00" files of those files recorded in FAT format. But when I concatenate the r00 with raw, it gives me the same strange color error.

Concatenatting dummy:1.bin [(00 in HEX) or (00 00 00) or others odd files] + failedfile.raw It gives me dngs where I can clearly recognize the image.

 
Is there any possibility to convert raw to mlv and try mlv_dump? As Jared did (-F2,-2 -o fixed.mlv defect.mlv)?

Well, it happened in 3 cards. Two in FAT and One in ExFAT. In all the cards I have good files as failed files.

I used to use this cards all the time in Raw. (2 cards are Lexar 1000x 32gb - formatted in FAT-, and the other is a Komputer Bay 128GB 1066x-formatted in ExFAT-)

a) two in FAT, 1 in ExFat.
b) Card reader is a Vantec usb 3.0 That I used several times with Raw shooting. (I will get another one and try just in case)
c) No, I dont erased or changed any file.

It's desperate. I can see the images in strange colors
Should I upload another raw file?

crossing fingers

Trying with onther raw file. CMD "dummy_1.bin+failedfile.raw" I have got a result where I can see the image of the plane. If you can see, there is the stairt that I have shooted.

Here is the image:
https://s23.postimg.org/gchwcumnv/trying_recovery_RAW.jpg

In other hand, it is strange, because I am using different CF cards, And It happened in different two. 

Ok.. but.. How could I do that?

I use ML raw all the time, without any problem.
This time I think the error was to record with the cards formatted in FAT32. I always do it in ExFAT. Configuration was 5DMKIII at 50fps in PAL (1920x490 -> 1920x818). Override 50.000 (for50)

So Sorry for the delay!

Here is the file:
https://www.mediafire.com/folder/ftetuiv7z0lp5/Raw_Failed_files

"Mediafire is verifying the file" right now :/ I ll tell you when veryfing get done!

  ]
Ok, I have tried mergging
copy/b dummy_1.bin+failedfile.raw test1.raw
copy/b dummy_2.bin+failedfile.raw test2.raw
....
(from 1 to 7 unsuccessfully ) 

Print screen raw2cdng / HxD:
https://s29.postimg.org/6yph0zfdz/print_screen.jpg

Just Uploaded one raw failed file (the smaller)
http://www.mediafire.com/?ftetuiv7z0lp5

Ok! Thx! I will tray it and report the results!
(I am uploading an example, RAW failed file, right now)

Thank you so much for the quick answer!!
I have tried concatenating files with command, but it doesnt work, because I didnt use Hxd to change de beginning of the files. I have tried concatenante those in HEX but as you said, is not possible because are to large.

About your instructions, I understand that I need to create o new HEX with only 0x00 or 0xFF (that I will name "dummy_1.bin"). Then to concatenate this one with the RAW file (backup) in command. Its right? Or I am missing some step?
I dont understand when you say the others files with one byte more. What do you mean? (sorry I am totally new in HEX).

Thank you! Now I feel that I do not lose hope!

Hi guys! I am with the same problem than Jared experimented, but in my case with a RAW file. I have tried mlv-dump but it doesnt works, I think because it is not a MLV file.
Could you please give me an advice? I have an amazing shots blocked 

Thanks a lot! every thing is a lot for me now!