Messages

4K(3840x2160) 8bit raw on 5D3 is not possible?

Hi all,

Thank you for your all reply.

I understand.

Then, 4K(3840x2160) 8bit raw on 5D3 is not possible?
Now, ML experimental version is 10 or 12 or 14bit raw recording, right?
Lower bitrate is fine, the most important is to use ML with continues recording in 4k in this era.

Best Regards

Raw is possible and Jpeg is impossible?
I cannnot understand.

Raw need more power(?) and encoding and processing time than jpeg, right?
But Jpeg is impossible?

Best Regards

Thanks for your reply.

4K RAW is possible on 5D3(at least 3840x1560, 12bit, 24fps).
But I cannot understand that 4K 8bit mp4 is not possible.
If it is not made for such realtime processing and encoding, 4K(3840x2160) 8bit jpeg is possible?
Shooting raw in 4K(3840x2160) is impossible.
But probably raw is not matter anymore.
It is 4k era today.
If it can record in 4K(3840x2160) 8bit jpeg, 5D3 is still using in the field, I think.
What do you think?

I know it is impossible to record in 4K video with raw because of the low spec of camera(5D3).

But, is it impossible in 4K (8bit) mp4 recording, either?

I dont use 5D3 anymore because it cannot record 4k video.
But I dont throw away and sell it as a second hand.

If it can record in 4K (8bit) mp4, we can use 5D3 again.

Best Regards.

Please tell me.
Do you have plan to add Full-resolution LiveView: 5796x3870 at 24 fps(8bit or 10bit) in the near future?
Or, add normal 4k with 16:9 aspect ratio?
I want to use Magic Lantern normally.
If 16:9 aspect ratio feature has in ML, more people use ML, I think.

someone please...

4096×2160 24p 10bit raw, Continuous please!!!!

always great thanks to ML team.

When will the experimental build become nightly build?
and why is it still experimental?

thanks for telling. but only a second? really? a second? at 24p?

why just consider and not try yourself? 5k even at 60fps no problem because the 1st post does exactly contain that info. 

24p should be a second - maybe!?

2017-08-22 build,

How long can I shoot with 4096x2560@24p ?

I am considering to install the latest build.

Is there any possibilities shooting 5796x3870@24p in the near future?
(8bit, 10bit or 12bit, not raw video such as .mov or mpeg is ok)

Can I ask some questions here about 5D3's experimental build?
I don't know where to ask. If it is wrong place, I apologize.


1.
I always think that why there is no standard resolution such as below?
Are these size so difficult to build?
Probably I think almost people using ML on 5D3 wish for them below.

2880x1620(3K HD 16:9)
3072x1620(3K 1.9:1)
3840x2160(4K UHD 16:9)
4096x2160(4K 1.9:1)

Why is it only incomplete resolution now, such as 3072x1920 or 3840x1600?


2.
I want to use 4096x2560 for the stabilized footage of 3840x2160.
Is it impossible to record at 24p?
(8bit, 10bit or 12bit raw is fine. H.264 is also fine.)
Can someone please make it?


3.
I don't want to push the crop button.
Is it impossible to be crop mode from the beginning?
I think it seems save time. What do you think?


4.
I want to participate in ML development, but I don't have the knowledge of it.
What should I study for ML development?


Always thank you for development of ML.
You saved my old 5D3 camera.
I want to use it on the 4k field.

Hope your reply soon.

Hi,

I uploaded the pics.(5D3 1.2.3 2017March30build, 1920x1080)
Lower ISO also has dead/hot pixel.
But it does not stand out and less than higher ISO.
Therefore, I want to be able to chose MAX ISO(like slowest shutter) when using ETTR.

The ISO will be 12800(it is 5D3's max ISO) soon, although I am in not so dark.
I always think "It does not need 12800 now." and change to 3200 or 6400.
Higher ISO is noiser, so I don't want to use ISO 12800 anymore.

If it is possible, please create it on next build.
(Both Nightly Build and Experimental Build, please.)

ISO3200




ISO6400




ISO12800

Many thank you for ML team.

Can you be able to chose MAX ISO(like slowest shutter) when using ETTR?

I am using ETTR and it is very very useful.
But when I am in the dark, the ISO will be 12800(it is 5D3's max ISO) soon.
If I shoot with 12800 ISO, it always appears dead/hot pixels.
SO, I want to chose max ISO(such as 4000) when using ETTR.

If it is possible, please create it on next build.
(Both Nightly Build and Experimental Build, please.)


*Canon 5D3

Hi,

Always thank you for ML team!

1.
Firmware 1.1.3 is still slightly faster than 1.2.3 when recording RAW/MLV ?

2.
Which is correct choice RAW or MLV for recording on 1.1.3?

I am considering about downgrading firmware.

Please tell me if anyone knows.

thank you very much for your reply.

solved the problem!

I want to use these great cropmarks.
But I cannot use these cropmarks properly in my camera, 5d3(1.2.3).
I have no idea why default cropmark appears?
I switched to new cropmark and it overlayed on the default.
The default cropmark is always appear.
Why?
I want to change the default to new one.

If anybody knows how to solve this problem, please let me know.
I am suffering from this trouble for a month.

image
https://www.dropbox.com/s/gjdbd8swljados6/5935025617890.jpg?dl=0

*The default cropmark does not exist in ML folder. But it appears.

Hi,

Thank you for your advice!
So, I decided to buy sandisk cf card.

Can I ask you a question?
Do you record with crop mode on 5D3?
If you do, please tell me about it with sandisk cf card.

thanks

Hi all,

I have a question about ML raw recording with Canon 5D3.
Which CF card do I have to buy?
I am considering one of two below.

SanDisk Extreme PRO 128GB; 160MB/s (1067X) read, 150MB/s (1000X) write
http://www.amazon.com/SanDisk-Extreme-CompactFlash-Memory-SDCFXPS-128G-X46/dp/B00ECEVGN0?

Lexar Professional 1066x 128GB; 160MB/s (1066X) read, ???MB/s write(not published in official)
http://www.amazon.com/Lexar-Professional-CompactFlash-Software-LCF128CRBNA1066/dp/B00IAYFDJG/ref=pd_sim_147_5?ie=UTF8&refRID=08MQ7T6YCE2260ZM92DE


It is very important to record the raw video with the highest quality and the best resolution (1920x1080?).
* I have never used ML before. So I don't know the setting.

I just would like to hear from you, ML professionals.
Please advise me.
Which CF do I have to buy? Which is better with Canon 5D3?

Hope your reply soon.

thanks