Messages

What I've realized, is that once I get to like 34 seconds of recording in RAW, the speed of the SD dramatically drops to mid twenties, which causes it to skip frames, which causes it to stop recording. The SD card said it was up to 90MB/s and another member on here recommended this exact one for the T5i/700D

I don't know what to do

Not sure if the pic uploaded, but here is a benchmark (I think...) of the card http://picload.org/view/cwoicpg/diskspeedtest.png.html And do you think I should return the card? The description stated "High-speed, Class 10 performance-leverages UHS-I technology for a read transfer speed up to 600x (90MB/s)
Capture high-quality images and extended lengths of stunning 1080p full-HD, 3D, and 4K video with a DSLR camera, HD camcorder, or 3D camera"

Yea, that was it. I got the PPM, file. http://i.imgur.com/iQdWMxs.jpg

I also think my problem is that I might not be pressing the play button. I'm pressing the button next to the trash can, which looks like the button on the top right of this image (This is not my camera or image) http://icdn2.digitaltrends.com/image/canon-eos-m-micro-four-thirds-camera-rear-controls-1000x665.jpg?ver=1

I think my camera might have automatically shut off before it was done. I set it to 15 minute automatic shut off now, so I'm running it again.

Yea, so the only file I have is the Bench.TMP file, and I'm not sure what to do with it

Ok, just started the benchmark. But with the previous benchmark, I only got that TMP file, and I couldn't convert that into anything. Where would the PPM file be located on the card?

Oooh, I used Disk Utility on my Mac, and formatted it to ExFat. I'm not really sure what you're talking about with the different benchmark modes, and I'm also not sure what a PPM file is, because we haven't said anything about PPM files. I'm feeling weird about ML right now, because I want it to work so bad, but so far, the only thing that's working good is the MagicZoom (But it's choppy, and doesn't have a green bar to let me know it's focused, like I've seen in some videos. Not sure if ML still has that feature) but Rack Focus doesn't work for me at all. I'll first focus the lens, then turn it to AF, and then go into the "Focus End Points" and I'll change the steps, but the focus doesn't change, and sometimes the step change will be 2, and then other times it'll skip by like 20. Right now I'd like to focus on RAW/MLV, but I'm not sure what I'm doing wrong, because I've watched a bunch of tutorials online.

I was using "Raw recording v2.0 MLV" I'm not sure what you mean by "File system used on card" I have not tried to lower the resolution, because I didn't want to record anything under 720P (Which is what I was recording at) Card R/W Results: http://i.imgur.com/ys4r67k.jpg (also have the Bench.TMP file, but I don't know how to open it. I tried opening it in Terminal, but it said "cannot execute binary file")

How did you figure it out? And I'm using a Mac, and don't know how to convert the MLV files, and can't find any software that works. I have a T5i as well, and can't shoot more than 25 seconds (16GB, 90MBs)

Please help!

Ok, so I got to 25 seconds, and a frame skipped, so it stopped recording.

That's probably the best idea Thanks. My camera is arriving on Monday, so I'll try it then

I pointed to that thread because I wouldn't want to record anything under 720P, and I couldn't find any other thread about people talking about the T5i, Raw, and Video. Was this fixed in an update or something?

Further down on page 3, people start saying that they can't record for much longer than a few seconds, and then stupendousman_dk posts about how his video has a bunch of tiny pink dots on it. And then ThankMeLater says the same thing about how he can't record for more than 2 minutes, and then Jailll says the same thing.

It was in this thread http://www.magiclantern.fm/forum/index.php?topic=8550.0 (And thanks for you help. 7 minutes it fine for me)

Ok and 1 more question, I've seen people talking about how they can't get RAW video running on their T5i, yet this guy https://www.youtube.com/watch?v=g5k2BSg46N0 runs it beautifully. I just purchased this SD card: http://www.amazon.com/gp/product/B00IF4O69O/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1 do you think I'll be able to run RAW video?

Ok, so I just drop the whole folder in then? (Sorry I'm asking all these stupid questions, I just don't want anything to go wrong)

Thanks! Still though, what do I drag onto my SD? I linked the image of what's in the ML folder, above.

I saw this, but then I saw people below talking about the 700D not having a build, so I thought it was really old. So do I just follow the instructions on the first post?

EDIT: also, what do I drag onto the SD? This is what is in my Magic Lanter folder http://i.imgur.com/WSWI4zP.png

I will be getting my T5i within the next couple of days, and I've done a bunch of research on the camera, so I'll know how to use it. But is there any tutorial that is T5i specific? I've seen this video: https://www.youtube.com/watch?v=F6JHRay8f2Y but he talks inserting the Fir file into the ML folder (because he's downloading the 600D version) and I don't know if I have to do the same with the 700D (Because there's already a fir file in the folder) and he's talking about EOScard, but again, I don't know if I need to do that with the 700D or not. If someone could help me please

I will for sure keep an eye out. Thanks

Bump. Do you guys think this ML will ever come out? I'm going to be getting a Canon in February, and if I can get the T5i at a decent price, I'll get that. But if I can't, I'll probably have to go with the 100D, and it would really suck if I couldn't get ML on it :/