Messages

So, the Live View worked with the 6/21 nightly build for 5 or so minutes (was able to use live view after several camera restarts).  It now has the same issue as before - either a black screen or green screen after starting live view.  Occasionally the screen displays a colored pattern of dots or lines.  This is only when entering live view and behavior changes with no changes to any options in the ML or canon menus.  Photo taking only displays black.

I very much do appreciate your responses dmilligan! 

Used the latest nightly build.  Live View works for ~10 seconds and then gives error 70 and the following crash log:

ASSERT: 0
at Evf\EvfState.c:1190, task Evf
lv:1 mode:3


Magic Lantern version : Nightly.2014Jun21.600D102
Mercurial changeset   : 392d3500248e (unified) tip
Built on 2014-06-21 08:13:55 UTC by [email protected].
Free Memory  : 251K + 1081K

Taking a picture yields the same result as the original problem - it appears to take a picture but it is never displayed to the screen or saved on the card.  The battery then requires removal to return to the menu or anything else.

The fps timer issue appears unchanged:

Try a more recent version, that is nearly two years old!
http://builds.magiclantern.fm/#/

I downloaded ML in March 2014, so I'm not sure why that is the listed build date in the error log.

Updated to the current stable release (v2.3) and have the same issue.

I had been happily using ML for several months.  Then I set the FPS override to 1 second in hopes of an upcoming astrophotography time lapse.

The Actual FPS now displays 0.000 and both fps timer a & b are 0 (as in the picture below).  These will not change upon restart and neither one will change manually.  Adjusting any parameter in the fps override box does not change the base values of timer a or b or the actual fps. 

Live view opens the shutter, displays black, then sometimes closes the shutter and shows dark green or other times doesn't do anything.  A battery-pull is required to turn off the camera and it has the same settings upon restart. Taking a picture using the viewfinder will not immediately error, but will not record the image.  Turning off the camera after snapping a shot shows the "recording data" screen indefinitely.

ML version used:
magiclantern-v2.3.550D.60D.600D.50D.500D.5D2



Update: Tried with ML card in and out (no card), plain card, and various FT+ settings for the timers.  Got error 70 a few times, but it was not tied to one particular setting and was difficult to reproduce regularly.  ML saved an error log with the following:
ASSERT: 0
at Evf\EvfState.c:1190, task Evf
lv:1 mode:3


Magic Lantern version : v2.3.600D.102
Mercurial changeset   : 7fee07c3b461+ (unified) tip
Built on 2012-07-23 16:06:42 by alex@thinkpad.
Free Memory  : 334K + 977K