Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - vstrglv

Share Your Videos / Re: Crop Mood Test - EOS M
May 07, 2023, 09:52:23 AM
Thank you masc! I have deleted MLVApp.dmg already, so don't remember about using windeployqt. But I guess I did not use it. I have tried Qt 5.13.2 and 5.14.2 also. It works. I added 9 DLLs plus "platforms"folder with  qwindows.dll manually. The only problem was to find libgomp-1.dll. It was absent in Qt 5.14.2 folder
Sorry found out. C:\Qt\Qt5.14.2\Tools\mingw730_64\x86_64-w64-mingw32\lib
Quote from: masc on September 20, 2022, 02:41:19 PM
@vstrglv: can't help with, but what was the problem on Windows? Which Qt version did you use? What compiler did you use?
Sorry for delay. I have tried to compile MLVApp on Mac and Windows.
I have installed macOSMojave10.14.6 and Qt5.12.10  through VirtualBox-6.1.38. After several attempts i have gotten MLVApp.dmg.
Then i tried to compile on Windows 11. Also Qt5.12.10. Compiled MLVApp.exe requests some dlls. Windeployqt helps to add several dlls to MLVApp.exe folder, but not all requested. After adding manually dlls (the whole number is 9) plus "platforms"folder with  qwindows.dll MLVApp.exe works. I have tried to compile MLVApp.exe with dlls inside exe many times but failed. At last i've red your masc post:
Quote from: masc on September 20, 2022, 12:32:16 PM
Static: uses static Qt libraries compiled into the exe. Crosscompiled from bouncyballs linux OS
Dynamic: uses dynamic Qt libraries, dll files. Compiled from my windows OS
I downloaded, opened it and saw that there were more files and folders than in my case. I deleted additional files and folder (which were missing in my compilation) but MLVApp.exe works.
What is the reason for this additional files and folders?
I have tried to compile MLV App on Windows but failed. Now I have installed macOSMojave10.14.6 through VirtualBox-6.1.38. I am on windows 11. I am trying to use "Compiler" app/script for macOS by Danne from first post. It seems to me a compiling goes good, but I can't  find file in MLV_App_Master folder. What is the problem?
Quote from: Danne on September 12, 2022, 02:07:34 PM
I tested on Extreme PRO 170MB/s V30 256gb card and working(eosm).
The same on Sandisk Extreme PRO 170MB/s V30 64gb card  working (eosm). Made in China.
@240MHz  Write - 92.1 MB/s
@192MHz  Write - 77.5 MB/s
@160MHz  Write - 68.9 MB/s
5D3 1.1.3 with Danne build crop_rec_4k_mlv_snd_isogain_1x3_presets_2022May15.5D3113 + Bilal patch
3.5K 1:1 centered x5 preset (3584x1730, 23.976fps), 240MHz,180sec
My CF: Sandisk Extreme PRO 256GB 160 MB/s UDMA7
My SD: Sandisk Extreme PRO 128GB UHS-I U3 170 MB/s(made in China,NoBP2019...)
-Small hacks enabled
-Two more hacks lvface + aewb
-One more hack enabled
-Kill GD used
-ML Global Draw off

1. 10-bit lossless
-Preview -Framing

2.12-bit lossless
-Preview -Framing

3.14-bit lossless
-Preview -Frozen LV (Framing is not continuous)
Thank you! It is interesting to look at 100% 1920x1080 crop from 1392*3x2340 or full 1392*3x2340 video.
Quote from: masc on April 14, 2021, 12:47:14 PM
You can also search and copy the dlls manually.
I have to add 11 ddls. I works.

Quote from: masc on April 14, 2021, 06:11:32 PM
On macos my command is:
/Applications/Qt5.7.0/5.7/clang_64/bin/macdeployqt Documents/MLV_App/platform/build-MLVApp-Desktop_Qt_5_7_0_clangOMP_64bit-Release/MLV\

<path to Qt binaries>/macdeployqt <path to MLVApp build folder>/<MLVApp executable>
Thank you! But it is out of my skill. I have tried cmd in win10 with windeployqt.exe. Cmd works without errors but mlvApp needs dlls.
I have tried in Run Settings -  windeployqt with arguments- "--qmldir C:\Users\alvli\Downloads\MLV-App-master\MLV-App-master\platform\qt" in QtCreator menu
So I have "Error while building/deploying project MLVApp (kit: Desktop Qt 5.9.0 MinGW 32bit)
When executing step "Run windeployqt""
Quote from: masc on April 14, 2021, 12:47:14 PM
You need to "deploy" the application.
Thank you very much! I'll try.
I am trying to compile MLVApp on Windows 10. qt-opensource-windows-x86-5.9.0 with MinGW32 compiler. It installed "Qt Creator 4.3.0" from
Then unpackffmpe in platform/qt/FFmpeg
then open platform/qt/ in QtCreator
then Build and Run.
MLVApp opens and works. MLVApp.exe 7591KB compiled in BuildDir\release.
Also ffmpeg.exe was copied to BuildDir\release
But after closing MLVApp it is impossible to run MLVApp.exe. There is a message about missing dll.
What is wrong?
Share Your Videos / Re: 5.7K in day and night (5D3)
March 09, 2021, 09:09:08 PM
As I understand "Profile" in your ElgersburgBHF.marxml is "Film" in v1.12. Importing to v1.11 gives very dark image with unknown profile. There are 10 Profiles in "Profile preset" but none of them gives this dark image. If you set "Film" Profile in v1.11 the image looks just the same as v1.12
Share Your Videos / Re: 5.7K in day and night (5D3)
March 09, 2021, 02:22:32 PM
But what is compatibility of the Receipts v1.11 and v.1.12? How to change one to another and back?
Share Your Videos / Re: 5.7K in day and night (5D3)
March 08, 2021, 09:38:00 PM
Quote from: masc on March 06, 2021, 09:25:51 PM
Here a short cut of the title clip. I also added my grade receipt. The darkframe is included in the clip.
Thank you very much! At first I used your Receipt in v1.11 and it was very dark, but in v1.12 it was O.K. I was surprised that you used sharpening in MLVApp. May be it is because you were not going to grade video later. And I have not found a darkframe in your uploads. Is a darkframe inside MLV file? Again thank you very much!
Share Your Videos / Re: 5.7K in day and night (5D3)
March 05, 2021, 09:15:43 AM
Quote from: masc on March 04, 2021, 09:52:00 PM
No matter how much I play around with my 5D3 - I always come back to 5.7K mode, which is awesome. Now I did two very different tests: one at very low light and one with as much light as possible.
Beautiful movies!
Would you please upload small cut of a low light mlv? I'd like to try grade it in MLVApp.
2. Try "Topaz Video Enhance AI v2.0.0" for upscaling. But it takes a lot of time.
Quote from: Walter Schulz on December 21, 2020, 11:25:01 AM
I mean last Danne`s 17Dec2020 build.
Quote from: Danne on December 21, 2020, 11:41:43 AM
I gave up on 240Mhz setting. I recommend any old builds with this patch still there not to use it. Too many issues.
What about 192mhz оn 5D3?
Quote from: rinski on December 17, 2020, 05:13:35 PM
Hello, I would like to comment that the sd_uhs module works well in 160 mhz and only with 240 mhz it has problems of sound loss after 3 minutes with 20, with sandisk extreme pro 170 MB / s 128 GB card, formatting the sd card or deleting the files on the computer has no danger, and the increase in speed recording with both cards at the same time is appreciated when recording with looser parameters and much longer.
Thank you very much Danne and company for your meritorious work.
Hello, what Canon`s model are you talking about? There is no possibility  to set 240 mhz for 5D3.
My test 5k anamorphic frtp 1280X2160, 10bit, Danne's build 2020oct23EOSM202
1. MLVApp 1.11-exposure, contrast, saturation, white balance, Width and Height Stretch -1.0. Exported as ProRes 4444.
2.Topaz Video Enhance Al 1.6.1, Artemis HQ, 200%(2560X4320), png(8bit lossless).
3a Adobe premiere pro v.14.5. Sequence 2560X1440, Scale Height 33.3%, Scale Width 100%. Export 2560X1440

3b Adobe premiere pro v.14.5. Sequence 1920X1080, Scale Height 33.3%, Scale Width 100%. Export 1920X1080. This is 1920x1080 crop from the previous 2560X1440 video.

The resolution is good for me. Thank you very much Danne.
Quote from: tmilardo on October 10, 2020, 06:20:32 AM
I think Mythic Cinema is referring to this video by Dave McKeegan. Proprietary SanDisk transfer mode at 3:38

My SanDisk 64GB Extreme Pro 95MB/s does not work at 192MHz (only 20Mb/s w/r). It works at 160Mb/s. But SanDisk 128GB Extreme Pro 170MB/s works at 192 Mhz (175/185Mb/s w/r). So I guess that SanDisk  Extreme Pro 170MB/s a bit better than SanDisk Extreme Pro 95MB/s.
Thank you both! I understand now.
I mean that raw2dng does not apply any curve, but MLVApp does.