Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Robbe

Pages: [1] 2
1
Camera-specific Development / Re: Canon 5D Mark II / 5D2
« on: July 25, 2014, 12:37:27 PM »
Quote from: Robbe on July 05, 2014, 04:17:40 PM
Installed latest nighly build (tried also with earlier versions), loaded raw_rec module and reboot.
The Menu/Modules shows raw_rec OK, but Menu/Movies are all dimmed and no green dot. In Menu/Modules/RAW video shows N/A, but I can set resolution and record.
Just after recording, the green dot lights and showing resolution. But when reboot there is no resolution showing and no green dots. Have to start over again every time.
Only me having this problem with Canon 5D mark2?

2
Main Builds / Re: Nightly Builds - try the very latest stuff here
« on: July 25, 2014, 12:33:58 PM »
Quote from: Robbe on July 07, 2014, 11:37:14 PM
Installed latest nighly build, 2014Jul02, (tried also with earlier versions), loaded raw_rec module and reboot.
The Menu/Modules shows raw_rec OK, but Menu/Movies are all dimmed and no green dot. In Menu/Modules/RAW video shows N/A, but I can set resolution and record. Just after recording, the green dot lights and showing resolution. But when reboot there is no resolution showing and no green dots. Have to start over again every time.
Only me having this problem with Canon 5D mark2?

3
Main Builds / Re: Nightly Builds - try the very latest stuff here
« on: July 07, 2014, 11:37:14 PM »
Installed latest nighly build, 2014Jul02, (tried also with earlier versions), loaded raw_rec module and reboot.
The Menu/Modules shows raw_rec OK, but Menu/Movies are all dimmed and no green dot. In Menu/Modules/RAW video shows N/A, but I can set resolution and record. Just after recording, the green dot lights and showing resolution. But when reboot there is no resolution showing and no green dots. Have to start over again every time.

4
Raw Video / Re: Raw video on 5DMK2
« on: July 05, 2014, 07:37:44 PM »
Installed latest nighly build (tried also with earlier versions), loaded raw_rec module and reboot.
The Menu/Modules shows raw_rec OK, but Menu/Movies are all dimmed and no green dot. In Menu/Modules/RAW video shows N/A, but I can set resolution and record.
Just after recording, the green dot lights and showing resolution. But when reboot there is no resolution showing and no green dots. Have to start over again every time.

5
Camera-specific Development / Re: Canon 5D Mark II / 5D2
« on: July 05, 2014, 04:17:40 PM »
Installed latest nighly build (tried also with earlier versions), loaded raw_rec module and reboot.
The Menu/Modules shows raw_rec OK, but Menu/Movies are all dimmed and no green dot. In Menu/Modules/RAW video shows N/A, but I can set resolution and record.
Just after recording, the green dot lights and showing resolution. But when reboot there is no resolution showing and no green dots. Have to start over again every time.

6
Tragic Lantern / Re: Uncompressed 600D Raw Video
« on: June 22, 2013, 07:40:23 PM »
Quote from: 1% on June 22, 2013, 07:31:05 PM
C'mon... read... sraw can't be changed from canon menus.
What do you mean with "C´mon...read..."?
And how to get back the settings for image quality when using Canon 600D without ML?

7
Tragic Lantern / [TRAGIC LANTERN] Can´t change Picture quality after ML installation
« on: June 22, 2013, 06:23:55 PM »
Ooops! Have had trouble formatting to exFAT which is now resolved, BUT noticed that I couldn't change the image quality when Canon 600D was "normal", that is when I reset back to basics in my attempts with ExFAT.
This is how it now looks when the camera is "normal" and trying to change image quality:

8
Tragic Lantern / Re: Uncompressed 600D Raw Video
« on: June 22, 2013, 05:47:55 PM »
Quote from: N/A on June 22, 2013, 07:32:41 AM
Weird, I have a Sandisk 95 formatted to exFat, works beautifully.
Ooops! Got to the end ExFAT to work, BUT noticed that I couldn't change the image quality when Canon 600D was "normal", that is when I reset back to basics in my attempts with ExFAT.
This is how it now looks when the camera is "normal" and trying to change image quality back from sRAW:

9
Tragic Lantern / Re: Uncompressed 600D Raw Video
« on: June 22, 2013, 02:30:43 AM »
Quote from: N/A on June 22, 2013, 02:10:19 AM
Use EoSCard to make it bootable
Done that in both Mac and Windows. Same result.
Is there any difference in what order it is done? That is, first format exFAT, made ​​it bootable and then copy ML 2.3?

10
Tragic Lantern / Re: Uncompressed 600D Raw Video
« on: June 22, 2013, 01:29:57 AM »
Quote from: Jonit on June 22, 2013, 12:33:35 AM
you need to have "600D-102.FIR" on your SD card. I was testing also other builds of ML at that time, that's why i had 3 different autoexec files on my card.
The file was there "600D 102.fir" (70K) on a brand new Sandisk Extreme 32GB SDHC U1, 45MB/s. Have tried exFAT formatted in both Mac and Windows, and with ML 2.3. Same text each time: "Update file can not be found. Please check the memory card and reload battery than try again".
Have also tried another new SD Sandisk Extreme 32GB SDHC U1 95MB/s.
No problems installing ML 2.3 on the cards when formatted as FAT32.

11
Tragic Lantern / Re: Uncompressed 600D Raw Video
« on: June 21, 2013, 08:12:21 PM »
Quote from: Jonit on June 15, 2013, 11:55:47 AM
I made a quick benchmark of a SanDisk Extreme 45MB/s. After formatting it to exFAT file system, it gives stable 20+MB write speeds.

https://www.youtube.com/watch?v=HI4XZPAMoZk

The file was there "600D 102.fir" (70K) on a brand new Sandisk Extreme 32GB SDHC U1, 45MB/s. Have tried exFAT formatted in both Mac and Windows, and with ML 2.3. Same text each time: "Update file can not be found. Please check the memory card andre load battery than try again".
Have also tried another new SD Sandisk Extreme 32GB SDHC U1 95MB/s.
No problems installing ML 2.3 on the cards when formatted as FAT32.

12
Share Your Videos / Re: T3i/600d (H.264 vs Raw) Awesome results!
« on: June 08, 2013, 06:16:55 PM »
Quote from: CFP on June 05, 2013, 09:48:46 PM
The description sais:
Memory used: Sandisk Extreme SDHC 45MB/s
Raw resolution: 960x544
H.264 resolution 1920x1080
Camera settings: Global draw off, HaCKeD mode on, Pic quality SRAW, FPS over drive off.
Is this the settings for "T3i Raw video test 5 (H.264 vs Raw)"-video?
Been trying with same card and settings on my 600D with latest nighly and can only record 10sec.
And what have "Pic quality SRAW" to do with RAW-video recording?

13
Share Your Videos / Re: Raw music video on 600D
« on: June 06, 2013, 10:33:02 PM »
Quote from: N/A on June 06, 2013, 02:49:02 AM
Sandisk 95 MB/s
Thanks! Means that Canon 600D can handle more than 20MB/s?

14
Share Your Videos / Re: Raw music video on 600D
« on: June 05, 2013, 11:01:35 PM »
Quote from: thefix on June 04, 2013, 09:59:10 PM
Nice work and getting everything done in 24 hours is a feat in itself!
Agree! What type/speed of SD-card?

15
Raw Video / Re: How to Install: -- RAW video & ML -- BEGGINERS GUIDE
« on: May 22, 2013, 09:30:41 PM »
Thanks a lot for all your help!
No problems to replace autoexec.bin and copy the Module folder with 2 files into ML folder. I used 600D -- Compiles & Builds Builds.
Some try and error to get raw_rec in function, but it worked! Have to test settings for my SanDisk Extreme 32GB SDHC 30MB/s. So fare I got plenty of buffer errors.
I have to say that it's absolute fantastic the way Magic Lantern extend Canon cameras potential!
And it's even more remarkable that Canon seems to ignore this amazing opportunity!!

16
Raw Video / Re: How to Install: -- RAW video & ML -- BEGGINERS GUIDE
« on: May 21, 2013, 09:44:36 PM »
Quote from: Robbe on May 21, 2013, 01:21:48 PM
Is there a version for 600D? Can only find for 6D, 5D2 and 5D3.
Found 600D files at "Tragic Lantern"? Why Tragic?
But the Modules only have 2 files:MAGIC.SYM (53K), raw_rec.mo (25K)
and the autoexec.bin is only 520K.

17
Raw Video / Re: How to: -- Install RAW video & ML -- BEGGINERS GUIDE
« on: May 21, 2013, 01:21:48 PM »
Quote from: RenatoPhoto on May 21, 2013, 12:36:05 PM
Yep, make sure you get the ones that apply to your camera. Each camera has different files.
Is there a version for 600D? Can only find for 6D, 5D2 and 5D3.

18
Raw Video / Re: How to: -- Install RAW video & ML -- BEGGINERS GUIDE
« on: May 21, 2013, 12:20:23 PM »
Do I just have to copy modules folder with 3 files to ML and replace autoexec.bin on the card with function latest nightly build in my 600D?

19
Raw Video / Re: How to: -- Install RAW video & ML -- BEGGINERS GUIDE
« on: May 21, 2013, 02:11:27 AM »
Thanks for your BEGGINERS GUIDE!
Quote from: RenatoPhoto on May 20, 2013, 05:08:03 PM
SUMMARY:
1. Obtain new files for: autoexec.bin, magic.sym, raw_rec.mo, raw_rec.o
Where to get the 4 new files?

//RoBbe

20
General Help Q&A / Re: Is it worth to wait for Magic Lantern @ 650D or buy 600D?
« on: February 15, 2013, 01:14:48 AM »
Quote from: nanomad on September 29, 2012, 06:39:21 PM
Unless something goes wrong, the upcoming version of MagicLantern should allow you to bypass the 4G/30min limit on the 600D (and possibly 1100D and 5D3) where exfat is supported. You'll still need to run a little executable to patch the video files afterward.

Nanomad
Did something got wrong, or is the a patch?

21
Main Builds / Re: 600D Audio TEST release - 2.3 based
« on: November 23, 2012, 12:01:05 AM »
What is next and previous Out line?

22
Main Builds / Re: 600D Audio TEST release - 2.3 based
« on: November 22, 2012, 02:23:43 AM »
What's the purpose and difference with out +, out - and vol+ and vol-?
And to connect headphones - is the way via Canon A/V cable?
//RoBbe
PS
And once again; impressed by your work and hope Canon realizes it too!
DS

23
General Help Q&A / How recording left channel with internal mic and right to a external with 600d
« on: November 08, 2012, 06:01:17 PM »
The manual says:
 Audio input source for recording:

    internal mic
    L:int R:ext
    external stereo
    L:int R:balanced (internal mic on Left, external mic on Right from both external pins as balanced audio)
    Auto int/ext: camera detects if a mic is plugged in. Int is dual mono, ext is stereo.

Is this working with 600D?

RoBbe

24
Feature Requests / Shortcuts with black background
« on: September 04, 2012, 10:39:15 PM »
I´m using shortcuts a lot in video mode.
Is there any chans to have the shortcuts with black background?
It is sometimes very difficult to see the shortcuts in LiveView.
Apparently had previous version black backgrond with
white text.
//RoB

25
General Help Q&A / Shortcut background
« on: August 30, 2012, 02:30:24 PM »
I´m using shortcuts for focus, kelvin and f-stop, but it's difficult to see the white shortcuts in LiveView and video mode.
There is a shorcut3.jpg with black background:
http://wiki.magiclantern.fm/?image=fr%3Ashortcuts3.jpg&ns=fr&rev=1344710996&tab_details=history&mediado=diff&do=media
How to use it in version 2.3?

//RoBbe

Pages: [1] 2