Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Attero

Pages: [1] 2
1
Modules Development / Re: Full-resolution silent pictures
« on: December 27, 2014, 10:32:01 AM »
@mothaibaphoto: Yeha, i got the same experiences with the 600D. Its very useable and with a simple ND-Filter and some knowledge it works amazing.

Ok, so lets change the question. Is some1 here how can provide me an build with the FRSP modul for the 6D113?
I realy want to use this feature in my vacations for some timelapses! So i dont have to hurt my new 6D with thousands of shutter actions...

2
Modules Development / Re: Full-resolution silent pictures
« on: December 26, 2014, 12:46:24 PM »
Hey guys, I allready posted in the "Want to help with the latest development but don't know how to compile?" thread but i got no realy awnser.

Quote
Hey

In the end of July i tested the new FRSP modul with my old 600D and i was very happy with it. I took various photos with it and i produced even a little promo vid for this modul.


I tryed to find the borders of this modul and reported every bug i found. There were real not much ! ( :) )
Now, 5 months later, i sold my 600D and bought a 6D. Not hard to imagine that i want to try this new modul on the 6D too and help u guys with further developing. But.

I searchd now nearly 2 hours in the forum to find current silent.mo builds for the 6D but i found nothing useful. Now i read that people just asked for builds and didnt reported bugs :/ to sad.
So, the result from Audionut is totaly understandeble.

Now my question.
Is there any chance that a user, how is willing to "test" the FRSP modul, getting a working build for the 6D?

It would be realy awesome! This new feature would help me so much by taking timelapse's!

So i want to ask the same here.

Can some1 provide me a build for the 6D with the new full res silent pic mode?

Like i wrote. I tested it on my old 600D, which i sold few weeks ago, and i was totaly happy with it and it had realy just a few minor bugs. I took like 10k images without any dropped frames.

3
Hey

In the end of July i tested the new FRSP modul with my old 600D and i was very happy with it. I took various photos with it and i produced even a little promo vid for this modul.


I tryed to find the borders of this modul and reported every bug i found. There were real not much ! ( :) )
Now, 5 months later, i sold my 600D and bought a 6D. Not hard to imagine that i want to try this new modul on the 6D too and help u guys with further developing. But.

I searchd now nearly 2 hours in the forum to find current silent.mo builds for the 6D but i found nothing useful. Now i read that people just asked for builds and didnt reported bugs :/ to sad.
So, the result from Audionut is totaly understandeble.

Now my question.
Is there any chance that a user, how is willing to "test" the FRSP modul, getting a working build for the 6D?

It would be realy awesome! This new feature would help me so much by taking timelapse's!


4
Modules Development / Re: Full-resolution silent pictures
« on: September 17, 2014, 07:02:01 PM »
Ahh, ok now i got the point.

Export settings were 1080p | 25fps | h.264 | High Profil | Level 5.0 | VBR1 | 15mbit/s avg. 35mbit/s max.
I uploaded the clip at 1080p because my Inetconnection is very bad, 2mbit - 45kb/s upload...
And yea, the Youtube compression sucks... dunno what to do, to let the video look more crisp and clean. Any tips or hints?
Im going to upload the clip to vimeo very soon. Lets see what they do with the file.

5
Modules Development / Re: Full-resolution silent pictures
« on: September 17, 2014, 06:16:33 PM »
@Levas: Why would u average, lets say, 400 frames or even 90? If u want to extract single dng's u have to comand "--dng" but i guess u know that. If its only for experimental purpose, extract the dng's, develop them with, lets say, LR and average them with Photoshop. Maybe u could upload the 90 Frame .mlv so others can try to average the file`?

PS: I put together some sequenzes i've shoot with the new modul. I hope u enjoy this short clip.
A High-Five to A1ex, Dmilligan and the whole Magic Lantern Team for this modul!


6
General Development / Re: Silent picture capture with raw video format
« on: September 17, 2014, 05:41:03 PM »
So, like i sad. I put together some sequenzes i've shoot. I hope u enjoy this short clip.
A High-Five to A1ex, Dmilligan and the whole Magic Lantern Team for this modul!

7
General Development / Re: Silent picture capture with raw video format
« on: September 05, 2014, 11:31:06 AM »
Yeha. I have the same problem... Would be nice if it jumps back to LV earlyer to study the histogram. Now i have only 1/2 of a sec for this.

8
Modules Development / Re: Full-resolution silent pictures
« on: September 01, 2014, 10:35:12 PM »
Just some short Info. 600D 19July Nightly + silent.mo from dmiligan ist still working great for me. Taking 500 pictures without any dropframes and saves same into seperat .mlv/.m00 files. Extracting with mlv_dump.exe and works perfectly. Dont wanne miss or lose this in my Canon!

Here is one framegrab from a little "ML Full Res Silent Pic" promo video im putting together...




9
General Development / Re: Silent picture capture with raw video format
« on: September 01, 2014, 10:30:30 PM »
Just for Info. 600D 19July Nightly + silent.mo from dmiligan ist still working great for me. Taking 500 pictures without any dropframes and saves same into seperat .mlv/.m00 files. Extracting with mlv_dump.exe and works perfectly.

Here is one framegrab from a little "ML Full Res Silent Pic" promo video im putting together.



Just some Ideas. It would be great to see the (RAW?) Histogram during saving or when the pic is saved. For Day to Night(or Night to Day) TimeLapse this is very important.

10
Modules Development / Re: Full-resolution silent pictures
« on: August 12, 2014, 10:31:47 PM »
Yes, ofc. Lets hope u r right. Right now i cant go under 5s intervall :/

11
Modules Development / Re: Full-resolution silent pictures
« on: August 12, 2014, 04:07:45 PM »
battery / and / make timelapses more fluent, connected due to not much time between shots

Sorry? What do u wanted to say?

12
Modules Development / Re: Full-resolution silent pictures
« on: August 11, 2014, 11:41:09 AM »
High Five for Greg!
I guess thats gonna save a lot battery life when you shooting Timelapse.

13
General Development / Re: Silent picture capture with raw video format
« on: August 02, 2014, 11:52:28 PM »
Yea, i fully agree with marekk. To turn off the Display would be great trough timelapse! Or at least to auto decrees the brightniss of the Display.

14
Ok. So, what can i do to fix this?

15
Ok im on it.

So, here are the Images

Standart Dual Iso capturing .cr2 --> https://www.dropbox.com/s/dw4yzgimi86vk80/Dual_Iso_CR2.CR2

Full Res Silent Pic capturing .DNG --> https://www.dropbox.com/s/e8umt8em8wl53oq/Dual_Iso_Silent_Pic.DNG

16
Hey Guys. I have a little Problem over here with Dual Iso. At first, u realy did a great job with this Modul, Big Thanks for that!

But now the Problem. I tryed the Dual Iso with the newest Version of Full Res Silent Pic (Imagine silent pics + 14ev dr...  realy awesome).

So i took a dual Iso image on the normal way. I got a simple .cr2 file as always. (left side)
After that i took a Full Res Silent Pic as a 14Bit .DNG with the new Modul (right side)



Both Images look OK for Dual Iso processing, or?(Yeha, the right pic is a little bit to bright, what ever ;) ) So i processed them both on the same way with cr2hdr.exe
But now look what i got after the process



The .cr2 image(still left side) looks fine but the Full Res Silent Pic .DNG(right side) looks very annoying.

Did i something wrong? Does some1 know's what happend here? Help pls!

17
Mine worked totaly fine. It extracted all 150 Frames perfectly.

MLV Dumper v1.0
-----------------

Mode of operation:
   - Input MLV file: 'K:\DCIM\102CANON\00.MLV'
   - Convert to DNG frames
   - Output into 'F:\abc\ML_TL_'
File K:\DCIM\102CANON\00.MLV opened
File K:\DCIM\102CANON\00.M00 opened
File K:\DCIM\102CANON\00.M01 not existing.
Processing...

Vertical stripes correction:
  1.000  1.000  1.002  1.000  0.999  1.004  1.000  1.001
Reached end of chunk 1/2 after 919 blocks
Reached end of chunk 2/2 after 133 blocks
Processed 150 video frames
Done


Win7 64bit - 600D NB.July19+silent.mo(.mlv container) - mlv_dump

Edit: Just added the sequenz for inspection ;)


18
Ok. I took 150 Images รก 31,5MB what schould be 4,725GB. I got 2 Files

File 1 --> 00000000.MLV (4.145MB)
File 2 --> 00000000.M00 (601MB)

What does this mean? Can i rename the File 2 to 00000001.MLV and everything is fine?

19
Agreed. Gonna test the 4GB limit right now.
Camera is shooing in this moment.
btw. i notice a bug. After i took an Image i wasnt able to take a picture on the normal way. Then i turned the camera off and on again. Still bugged... But now i wasnt able to turn the camera off. I had to take out the battery. Then the camera startet "normaly" again. "no clean shutdown - no moduls loading" etc.

Any Ideas?

20
Ok, thanks for the screenshoot barepixels ;) Its working fine by me too,  now ^^
I was not familiar with the cmd. I simply dropped the .mlv on the mlv_dump.exe :D

a simple Interface would be awesome! But what ever gonna happen. This is so teriffic a this point. Taking TimeLapse without killing the shutter, so nice!

21
Ok, thats very interesting. So the Problem is not inside the Camera. Its the Converter, thats good.
And now. I used mlv_dump.exe, he sad "Processed 3 video frames" but he did not created any files. What am i doing wrong?

And, Thanks Josep!

22
Windows 7 64bit, Camera like i wrote in the last Post.

This .MLV contains just 1 image. I have a very slow internet conection so the less MB the faster it goes ;)
https://www.dropbox.com/s/97ki94gildw70cx/37830000.mlv

Tell me if u can extract the .DNG without black bars.

23
HHmm... i tryed to use mlv_dump to extract my own .mlv . It worked, he sad "Processed 3 video frames" but he did not created anything. What did i wrong?
If i extract my .mlv with mlv2dng i got the black borders...

When i change the format inside the Camera to .DNG i got nice Images without black bars.
Using the 600D with the Nightlybuild from 19July together with the silent.mo from dmilligan.

24
I dont know exactly what i have to do to set the center right to avoid black borders on the 600D when im using the newest silent.mo with Timelapse -> .mlv container. But im still very happy how it works without it. Im sure u will delet this minor bugs ;)

If there is anything i can do to help with my 600D let me know.

25
Intervalomat + Silent Pics works great, puts the Frames inside a .mlv Container. But im gettin the same Error's inside mlv2dng.exe like barepixels. And like the image from him show's, there are some Blackborders in the Top and left of the Image after converting from mlv 2 dng.

Pages: [1] 2