Messages

Those lines on the brick building are nasty... have you tried to shoot the same building using the "crop" mode? maybe it'll look better... without buying that moire filter

Bump.. Sorry

I am wondering if the autoexe.fir from [7D]AudioControlsFirBin.zip can be used with the recent builds I have copiled from: https://bitbucket.org/OtherOnePercent/tragic-lantern-6d/commits
I assume the answer is no because it does not work.  But I just want to make sure in case that I am doing something wrong.

Maybe this autoexe.fir from 7D is specific for the 7D and not 6D (which is the build you copied from)

https://vimeo.com/74673892 my raw test

Looks nice! I like it!

Thanks 1%. The pop from the sounds has gone. This might be small and not crucial as the data still intact but whenever I import the WAV file into Audition, it gives me a warning saying the META DATA found but is corrupted and cannot be read. It's just annoying, but maybe you were aware of this

Thanks again for all your hard work!

Ok, well I fixed the popping.. it was configuring audio too often. I'll just rename it and upload.

so it can be downloaded from the same link (above) ?

Ok, this should fix motion detection.. uses edmac 05 like britcom. Wav menus are in audio like they should be.

https://bitbucket.org/OtherOnePercent/tragic-lantern-6d/downloads/%5B7D%5DEDM05MotDetectFix.zip

As to headphone, yea it works but I have to figure out how to unblack the screen since its on the master... and its double hard because I want it to work in non fir mode. The only adapter you need is the one that came with the camera + an RCA to female headphone jack converter.... I guess you could feed it to anything though.

Awesome... I see the Audio menu to record separate wav file now... will test it!

EDIT: test result (Thanks 1%)
1. Disabled Raw: record H264, it splits out a WAV file and a MOV file (I have option of "separate" wav file set)
2. Enabled Raw: record raw, it also splits out a Wav file but no audio recorded.

The WAV file from #1 has some pops mixed in with the audio... so weird... not sure what caused it... I tried to remove it but couldn't..."click removal filter" in Audition doesn't help any.

For the crash upgrade to a newer build... sound recording was freezing H264 till I fixed it.

So I disabled Raw Video and recorded H264, but as soon as I hit Record, it displays on screen Audio disabled... how do I enable it?

Thanks.

Alrighty then. It must be me. Maybe... I don't know but I'm sure I must have done something wrong. 

maybe a different version of File Manager module?

And did you pull the card out and verify in your computer that the files were actually deleted?

I just did a test by recording 3 files and then deleted it via the File Manager in ML, then took the card out and verified in my PC that those files are gone.

I just tested with both RAW and MLV and I was able to delete from the File Manager in ML... though it was only 2-3 files...

That video looks great but it was shot in burst mode...that was one of the first video we saw about raw on 7D... maybe there was something different in that mode? I'm only guessing

Correct me if I'm wrong, but it looks like I no longer have to do a firmware update every time to get the FPS override to be available, right? When I shut down the camera and turn it back on, I still see the FPS override. I haven't tested to see if it works, but the fact that it's still there seems to imply that I don't need to do a firmware update every time. Can someone confirm this?

That's what I thought too... but the fact that the option Video Hacks aren't available and when changing to lower frame rate, you won't see any different, it means it wasn't loaded and won't work correctly... (thanks to 1% to point these out to me)

hi guys! sorry but I don't know to much about, can somebody explain to me about "FPS OVERRIDE" ? what is the use of it and how to use it correctly? thanks!!!..

2. How have I to setting my camera to obtein hight quality or best quality recording raw?    About The quality in shoots may I do it in JPG-S and S-RAW? Thanks for the help!!! 

I am new too but I think FPS override means just that.. you override the fps that was set by Cannon... let's say you want to record a video at 10fps, without ML and without FPS override, you can't.... or if you want to do time lapse but I'm not sure if that's the main purpose another thing I read was that in crop (zoom) mode without fps override, you'd always get 30fps...

I read that you should set the camera to JPG-S for speedy write to the card?

Played with 5x crop mode:
2048x872
2.35:1 ratio
fps override 23.976fps

Processed DNG with ACR in AfterFX then final output from PP.

Thank you so much 1%!!!

The normal bin boots at start, you can do non master things... ie record raw, take photos/etc. To get FPS override (etc) to work you have to go run "firmware update" and it will restart + load on the master and slave together.

forgive me for asking one more question, how does one verify if FPS override actually working?

So... I follow these threads and got lost in some of the technical info... With 1% build, I see an autoexec.fir file... how do I use that? I read that is for the fps override.. and have to run manually? I put it on my card and I see that option so I'm not sure I understood it correctly.

With 1% new build above, I can record audio with the raw file? how would I use it?

Thanks so much.

Awesome! Love the composition and editing. Good work.

Hey, thanks!

7D Raw Crop Mode
1664x708 scaled to 1280x720
23.976 fps
2.35:1 ratio

A personal video using the Magic Lantern raw functionality! It's a whole new fun to explore!
Thank you Magic Lantern Team!!!

I like it! Nice color grading and great job on stabilizing... what did you use for the grading?

Still not working for me. I deleted all the old modules and uploaded all the new ones. I also replaced the scripts and everything else. The modules that I've selected are green and say they will load on reboot, but they never do. I can see the FPS hack and it appears to be working, so I'm pretty sure I'm doing everything right! but RAW recording just will not show up. I don't need to use EOSCard to update my card or anything, right? I just replaced the files on the card manually (well, deleted them first and then uploaded the new ones. I'm really confused here....

That's strange. Mine did the exact same thing.. all modules were "on, will load" and green but there was no video raw... so I removed all the modules on the card and recopied 1% build over... and video raw finally shows.

That's what I though but I must be doing something wrong. I updated all the files on my card with the new ones you provided. When I turn on he camera, I update the firmware via the Canon menu. It shows all the modules as if they've loaded, but when I go into the ML camera menu, the RAW options are not there. There's just no way to turn on RAW recording. Any idea what I'm doing wrong?

You might want to remove all of the previous modules you had then copy the 1% build over and then it might work for you.. I had the same problem.. I had previous build with .MLV raw and when I updated this over my existing files on the card, the modules shown loaded but I can't access Video raw.. then I did the above and it worked.

How does one convert the spanned MLV files? I have .MLV and .M00 files... usually I just drag the MLV and drop ontop of the mlv2dng and it does its job.. now that I have .M00, it doesn't do anything... drag and drop isn't working in this case? I tried cmd line but doesn't see any option to specify that it's splitted MLV... help please?
Thanks.

Trying to test the crop mode and see if I could push the resolution. There are still bad frames and not continuous.
I'm using Lexar Professional 1000x 32GB card.

What's with that flickering? I read that ACR caused it?


1st.
Canon Setting: 30fps
ML Mode: cropped
ML aspect ratio: 16:9
ML resolution: 2048x1152
Total Frames: 127

2nd.
Canon Setting: 30fps
ML Mode: cropped
ML aspect ratio: 2.35:1
ML resolution: 2048x872
Total Frames: 343

You can already do this. To some extent.

Hi, do you mind to tell me more? I'm fairly new at this and tried to search and read through the forum but couldn't find anything yet...

Thanks in advance.