Yes, I was using the one from 1.1.1. I didn't use it actively, just activated the module.
Etiquette, expectations, entitlement...
@autoexec_bin | #magiclantern | Discord | Reddit | Server issues
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Show posts MenuQuoteASSERT: FALSE
at ./Memory/Memory.c:188, task ShootPreDevelop
lv:0 mode:3
Magic Lantern version : Nightly.2016Oct05.70D112
Mercurial changeset : cc5a27d4f833 (70D_merge_fw112) tip
Built on 2016-10-05 19:45:22 UTC by ml@ml-VirtualBox.
Free Memory : 64K + 766K
Quote from: passegua on February 05, 2016, 09:51:05 AMLatest build is 22nd dec 2015. Check the first post!
Why D70 ML is one year old?
Is there any newer build?
Many thanks.
Quote from: nikfreak on January 25, 2016, 06:35:47 PMThanks!
@camslide: I will look into it at a later time. Seen this bug report now 2nd time.
Tue Dec 8 22:44:26 2015
0: 48.189 [STARTUP]
K325 ICU Firmware Version 1.1.1 ( 8.1.2 )
1: 48.220 [STARTUP]
ICU Release DateTime 2013.07.24 15:17:33
2: 50.141 [PROPAD] PROPAD_CreateFROMPropertyHandle DRAMAddr 0x41744000
3: 50.797 [PROPAD] SerialFlash Packages!! 0x10000
4: 51.669 [SEQ] seqEventDispatch (Startup, 0)
5: 51.694 [STARTUP] startupEntry
6: 106.102 [PROPAD] SerialFlash Packages!! 0x7
7: 106.311 [STARTUP] startupPropAdminMain : End
8: 106.437 [SEQ ERROR] NotifyComplete (Cur = 1, 0x2, Flag = 0x20000000)
9: 731.867 [SEQ] seqEventDispatch (Startup, 1)
10: 731.906 [STARTUP] startupPrepareProperty
11: 738.815 [RTC] PROPAD_GetPropertyData : PROP_RTC 0xa0
12: 740.280 [RTC] ChangePropertyCBR 0x0, 0x4000
13: 740.538 [RTC] RTC_Permit 0x20
14: 740.993 [SND] Seq LPC fin
15: 741.422 [RSC] hMemoryQueue (0x800010) hStorageQueue (0x820012)
16: 742.547 [RSC] MemoryStatusMasterResultCBR
17: 761.755 [FM] FM_RegisterSpaceNotifyCallback
18: 761.803 [MRK] MRK_RegisterSpaceNotifyCallback
19: 761.855 [AUDIO] [GPS] GPS_RegisterSpaceNotifyCallback
20: 761.919 [FM] FM_RegisterSpaceNotifyCallback
21: 762.180 [JOB] InitializeJobClass (ID = 21756, Num = 13)
22: 767.068 [EM] emLockControl (TYPE_JOBSTATE = 0x0)
23: 768.761 [JOB] InitializeInnerDevelopJobClass (ID = 21756, Num = 16)
24: 768.794 [JOB] InitializeMultipleExposureShootJobClass ( Num = 27,11 )
25: 768.819 [JOB] InitializeMultipleExposureSaveAndEndJobClass ( Num = 13 )
26: 768.842 [JOB] InitializeHDRShootJobClass ( Num = 12 )
27: 768.864 [JOB] InitializeHDRSaveAndEndJobClass ( Num = 34 )
28: 768.889 [JOB] InitializeGISShootJobClass ( Num = 12 )
29: 768.914 [JOB] InitializeGISSaveAndEndJobClass ( Num = 25, 31 )
30: 769.033 [TERMINATE] SHUTDOWN init comp
31: 769.094 [TERMINATE] Abort init comp
32: 1295.561 [SD] sdSendOCR: CCS=1, S18A=0
33: 1298.799 [SD] CARD CAPACITY is 30959Mbyte( 63404032Sec )
34: 1311.670 [SD] SD_GetAccessMode=3
35: 1311.688 [SD] Set Hi-Speed Mode( 48MHz )
36: 1313.063 [FSU] fsuGetPart: Block(8192, 63395840, 63404032)
37: 1876.777 [SEQ] seqEventDispatch (Startup, 2)
38: 1877.200 [SHTRD] [MNAV]Init
39: 1877.480 [SHTRD] [MNAV]SetMMap:1
40: 1880.966 [ENG] [ENGIO](Addr:0x41700000, Data:0x 44000)
41: 1926.736 [SEQ] seqEventDispatch (Startup, 3)
42: 1928.916 [MC] PROP_GUI_STATE 0
43: 1930.160 [MC] PROP_VARIANGLE_GUICTRL : Enable
44: 1930.247 [MC] [MC] PROP_HEADPHONE_VOLUME_VALUE : 0
45: 1930.417 [MC] [MC] PROP_MOVIE_PLAY_VOLUME : 9
46: 1930.593 [MC] PROP_LCD_OFFON_BUTTON : 2
47: 1931.602 [MC] regist master CardCover
48: 1934.238 [PRP] M:B1 F:0 L:0 P:32 T:8
49: 1934.424 [STARTUP] update coded version.
50: 1934.556 [STARTUP] internal version 08:01:02:b1:00:00:32:08:00:00:d0:d0:d0
51: 1938.609 [STARTUP] Set_AVS 60
52: 1941.640 [STARTUP] startupPrepareDevelop
53: 1945.258 [PROPAD] PROPAD_CreateFROMPropertyHandle DRAMAddr 0x41b2c000
54: 1945.946 [PROPAD] SerialFlash Packages!! 0x490000
55: 1980.247 [PROPAD] SerialFlash Packages!! 0x7
56: 1981.728 [MAC] MAC_Initialize
57: 1982.126 [MAC] K_BOARDID4
58: 1982.185 [MAC] K_BOARDID3
59: 1982.232 [MAC] K_BOARDID2
60: 1982.272 [MAC] K_BOARDID1
61: 1982.453 [MAC] Key=0x0 Board=0x0 Body=0x585b856b
62: 1994.372 [SHTP] RegRPCHandler Master
63: 2021.500 [MR] TimeCode Mode:1
64: 2021.634 [MR] TimeCode DropFrame Mode:1
65: 2021.679 [MR] PROP_MOVIE_PARAM:0
66: 2027.434 [HPC] ReserveHPCopyChannel (1, 116)
67: 2039.513 [MR] encdrwrapHPCopyAsyncCBR
68: 2044.876 [LVDTS] WARN First Get DTS_GetAllRandomData
69: 2054.472 [LVCOM] ExecuteDefectMarge1[0x41fc7000:64512]
70: 2055.320 [LVCOM] A:[38] B:[5928]
71: 2058.617 [LVCOM] ExecuteDefectMarge2[0x41fd6c00:64512]
72: 2059.137 [LVCOM] A:[24] B:[3510]
73: 2061.455 [LVCOM] ExecuteDefectMarge3[0x41de8400:45056]
74: 2061.903 [LVCOM] A:[20] B:[2974]
75: 2063.775 [LVCOM] ExecuteDefectMarge4[0x41fe6800:104448]
76: 2069.974 [LVCOM] ExecuteDefectMarge5[0x41df3400:52224]
77: 2091.263 [STARTUP] startupPrepareRemote
78: 2092.160 [AUDIO] RegisterCBRSDIOCableConnect
79: 2094.328 [COM] PackHeap 7983b8,7983b8,0
80: 2094.666 [COM] Local Heap warning hCom[0]size[262144]
81: 2104.444 [WFT] PROP_ADAPTER_DEVICE_ACTIVE: Can Not Change(0) Connect(0)
82: 2105.350 [WFT] InitializeAdapterControl END
83: 2116.314 [RMT] QuickTransmissionEnable (0, 1, 2, 2)
84: 2116.363 [RMT] PROP_CONNECT_TARGET (0x0 <= 0x0)
85: 2116.691 [RMT] PROP_CONNECT_TARGET_WFT (0x0 <= 0x0)
86: 2116.733 [RMT] PROP_CONNECT_TARGET_INNER (0x0 <= 0x0)
87: 2118.709 [PTPCOM] SetPtpTransportResources:0,3253
88: 2140.135 [WFT] Regist PropCBR PROP_WFT_BLUETOOTH
89: 2148.516 [FC] _FC_OpenCatalog : wNumOfDir 1
90: 2155.330 [FM] [GPS] GPS_Initialize (36, 25)
91: 2155.909 [MRK] MRK_Initialize
92: 2156.189 [MRK] mrkSetLockSemaphore
93: 2156.605 [MRK] MRK_PrepareMrkFileObject
94: 2159.010 [SEQ] seqEventDispatch (Startup, 4)
95: 2159.200 [DP] DP_Initialize()
96: 2159.935 [DP] Std T_PrintPage[0] T_PrintNo[0] R_PrintNo[0]
97: 2159.975 [DP] Std C_PrintNo[0] C_PrintPage[0], C_Copies[0]
98: 2160.078 [DP] Dp_SetPD_RegistApi Prev:0 New:0
99: 2160.487 [DP] PROP_CONNECT_TARGET [0x00000000]
100: 2160.526 [DP] DpConnectionTarget [0x00000000]
101: 2160.592 [DP] PROP_CONNECT_TARGET_INNER [0x00000000]
102: 2160.631 [DP] DpConnectionTarget [0x00000000]
103: 2160.691 [DP] LOGICAL_CONNECT [0x00000000]
104: 2160.720 [DP] DpsTerminate()
105: 2160.822 [DP] PROP_PHYSICAL_CONNECT [0x00000000]
106: 2160.853 [DP] RD_Cancel No Issue
107: 2160.884 [DP] DpPhysicalConnectFlg [0x00000000]
108: 2160.950 [DP] PROP_INNER_PHYSICAL_CONNECT [0x00000000]
109: 2160.968 [DP] RD_Cancel No Issue
110: 2160.992 [DP] DpPhysicalConnectFlg [0x00000000]
111: 2161.043 [DP] PROP_NETWORK_SYSTEM [1]
112: 2161.080 [DP] PROP_WIFI_SETTING [0]
113: 2161.344 [DP] [GYO]DpFunctionList[0x10117fff]
114: 2161.468 [DP] X FreeMem Address[0x00000000]
115: 2161.828 [INDEV] INDEV_Initialize
116: 2167.111 [HDMI] DisconnectHDMI : Not Connected
117: 2178.748 [IMPP] H264E InitializeH264EncodeFor1080pDZoom
118: 2178.826 [IMPP] H264E InitializeH264EncodeFor1080p25fpsDZoom
119: 2210.700 [DP] DP_RegisterCBR() Id=1 Count:12
120: 2210.741 [DP] DP_RegisterCBR() Id=2 Count:12
121: 2210.768 [DP] DP_RegisterCBR() Id=4 Count:12
122: 2210.889 [MR] tcmClockEnd
123: 2211.563 [DISP] SetBacklightBrightness called
124: 2229.117 [GUI] MainEventHandler PROP_ERROR_FOR_DISPLAY(0)
125: 2251.003 [GUI] MainEventHandler PROP_LV_OUTPUT_DEVICE(0)
126: 2253.436 [MAGIC] (Empty Func) MVW_RegisterXmpDataCallback
127: 2254.677 [CEC]CEC ON
128: 2256.848 [SEQ] seqEventDispatch (Startup, 5)
129: 2256.873 [STARTUP] startupInitializeComplete
130: 2256.967 [MC] cam event guimode comp. 0
131: 2257.896 [MC] cam event guimode comp. 0
132: 2259.400 [DL] PROP_ACTIVE_SWEEP_STATUS (0)
133: 2259.449 [DL] PROP_DL_ACTION (1)
134: 2262.564 [FA] ChangeCBR(ID=0x8003000a)
135: 2263.285 [FA] RequestFromCheckData
136: 2269.479 [MCELL][GuiFactoryRegisterEventCommissionProcedure]
137: 2272.604 [SEQ] seqEventDispatch (Startup) : End
138: 2297.302 [TCH]Active_Mode SetEnd
139: 2297.697 [TCH] [TCH]Variangle_State = 0
140: 2339.129 [DP] PROP_WIFI_SETTING [0]
141: 2339.461 [DP] PROP_NETWORK_SYSTEM [1]
142: 2341.219 [MR] PROP_MOVIE_PARAM:0
143: 2348.039 [DP] PROP_WIFI_SETTING [0]
144: 2348.616 [DP] PROP_NETWORK_SYSTEM [1]
145: 2349.748 [MR] PROP_MOVIE_PARAM:0
146: 2368.717 [MR] PROP_MOVIE_PARAM:0
147: 2371.673 [MR] PROP_MOVIE_PARAM:0
148: 2374.835 [FA] MpuMonSpecificFromPartner : COM_FA_CHECK_FROM 0
149: 2413.815 [DL] PROP_ACTIVE_SWEEP_STATUS (1)
150: 2478.953 [DL] PROP_DL_ACTION (0)
151: 2479.242 [DL] localCreateSerialIOChannelForDLIC
152: 2479.326 [DL] localCreateSerialIOChannelForDLIC
153: 2479.390 [DL] localCreateSerialIOChannelForDLIC
154: 2479.444 [DL] localCreateSerialIOChannelForDLIC
155: 2483.615 [DL] localCreateSerialIOChannelForDLIC
156: 2487.730 [DL]executeDL AD Start 69
157: 2487.808 [DL] localCreateSerialIOChannelForDLIC
Quote from: wmhsiaoyi on August 30, 2015, 05:51:10 PMAlready know issue. Use exiftool and change camera model to 60D.
i found that "Adobe Lightroom " can import the dng file but the quality is very low and still got a error message.
Quote from: crirus on August 20, 2015, 03:26:23 PMYou can adjust both in Canon menu. Read the manual for further information.
Hi
Anyone knows if it's possible to set the focusing speed with ML and limit ISO max value when set to Auto Iso?
Thank you
Quote from: nikfreak on August 16, 2015, 07:32:57 PMI just checked simple mode and can confirm it working. Unfortunately FRSP "freezes" in review mode until I press the shutter half way. Seems like I have to trigger it "the old way" :-(
@camslide: Your image review settings aren't set to "Hold". Due to that you get a black screen after timer (2sec, 4sec..). i am unsure if anyone ever tried what you did but normally frsp can be used with intervalometer for shooting timelapse.
I can't retry on another cam now but it looks to me that audio remote shot + frsp can't work together in the way you want to use it. It may be used to trigger it once but that's all.
Quote from: can-on on August 06, 2015, 07:48:59 PM70D has a max write speed of 45MB/s. You should get a card able to provide this write speed.
Hi All,
Sd card and I buy, what questions will utilize speed Guide Write 20MB / sec or faster.
There could be clarified? 90 MB / sec read 80 MB / sec write is correct ??
Maximum speed at which card you would take advantage of the machine
Thanks for answer.
(111A)
Quote from: denkpause on August 03, 2015, 07:54:43 PMI had this problem twice (meaning 2 pictures). Not reproduceable for me.
Starts at around 2 seconds exposure, varies though. Sometimes it goes away after a few shots, sometimes not.
Anyone else having this problem? Not sure if it has been mentioned on the forum yet. Haven't found anything...
Quote from: mrpanda on July 23, 2015, 11:32:21 AMMax resolution is 1824x1026. But I can only record for about 6s as the card slot only has a max write speed of 40MB/s and calculated write speed is 74.9MB/s.
Hello,
nobody knows the answer to my question ?
because I can not find anything on the internet
Quote from: sergey on July 23, 2015, 08:49:04 AMMax Shutter Speed is around 1/15. For more information read here:
In The File.DNG ( received in mode Silent Picture - maximum resolution ) have over exposure ( very light).
Not work sunny day --- (iso100,aperture 2.8 , time 1/100) or (iso100,aperture 2.8 , time 1/2000) -- snapshots identical--very light
Quote from: nikfreak on July 14, 2015, 06:38:01 AMI didn't use any conversion tools. Thought, dng should work right out of camera. What tools do I need to use?
... means you got dualiso enabled, too, right? Which tools do you use for conversion?
Let's start simple. Disable all modules except silent.mo and then try with fullres mode, too (not simple)! Result?
Quote from: nikfreak on July 13, 2015, 09:59:55 PMTested w/o battery grip and correct values are displayed. One of both batteries was empty.
These are not °celsius / fahrenheit. Just raw values but thx for testing. Looks like a placebo on my side
FRSP is working nice over here. No problems saving as DNG / MLV. Can't reproduce your issue atm. Anyone else having this on A or B rev?
Grip: use w/o to see if it works. I guess it would also happen with original grip
Quote from: SPalarius on June 05, 2015, 04:38:23 AMAs you can read in the menu the 0 - + -- ++ represents normal, dark, bright, even darker, even brighter exposed picture.
And now that the firmware for 70 d are not functions of HDR photography , I found with the change of braking but it's totally different and there 0 - ++ -++ what it is and how to use it , can anyone suggest .
for earlier thanks.
Quote from: nikfreak on April 24, 2015, 06:24:08 PMOne of both helped. Thank you!
@camslide: tried to remove your battery? if that didn't help just reset ML to defaults via settings and retry.
Page created in 0.085 seconds with 13 queries.