Author Topic: Canon 7D Mark I (Read 1072644 times)

arrinkiiii · « **Reply #1300 on:** December 21, 2016, 02:46:45 PM »

For the 7D it's not working, you have a compilation made by dfort and other in this same post from nikfreak... but it's not working properly.

It need to work with CONFIG_EDMAC_RAW_SLURP in the 7D, for it give clean image in 10 and 12 bits... I think nikfreak is working on that... we hope

Are you @nikfreak ?

GJim · « **Reply #1301 on:** December 21, 2016, 04:04:27 PM »

Just installed ML on my 7D, primarily to be able to use the shutter button to start/stop video recording. Initial tests working great - I can use the on-camera shutter button or a remote such as the Canon RS-80N3.

Thanks for providing this great firmware modification.

One wonders why Canon didn't provide this same function instead of forcing us to use that tiny, hard-to-reach, counter-intuitive, button for video. That button is even more difficult to use when the Varavon finder is installed.

Again, thanks!

G-Jim c):{-

GJim · « **Reply #1302 on:** December 24, 2016, 03:15:26 AM »

On my 7D, in ML 'Movie Tweaks', I have selected 'REC/STBY'. However, I'm not seeing that notification when in Movie Mode. I do get the red 'dot' when recording video.

Magic Lantern version: Nightly.2016Dec19.7D203
Mercurial changeset: 4f72a0eabb16 (unified) tip
Built on 2016-12-18 23:30:22 UTC by jenkins@nightly.

G-Jim c):{-

beanz · « **Reply #1303 on:** December 27, 2016, 02:58:40 PM »

Just wondering if there is a solution to the black sunspot when filming? Aside from fixing it in post. Is this a Canon hardware issue? Obviously filming into the sun is not really recommend but sometimes can't be helped. I tried searching here but didn't find anything.

Frank7D · « **Reply #1304 on:** December 29, 2016, 04:41:22 PM »

So I just tried the 10 and 12 bit raw with the 7D for the first time, using the 12/18 build from dfort, and I don't see any problem with the image. What defects are others finding?

PaulHarwood856 · « **Reply #1305 on:** December 30, 2016, 01:17:35 AM »

Hey Frank7D,

What were your settings for 10 bit raw recording on the 12/18 build? I was getting all kinds corrupt footage, along with extreme shaking, referred to as Earthquake footage here on the forum.

- Paul Harwood

PaulHarwood856 · « **Reply #1306 on:** December 30, 2016, 01:20:33 AM »

Hello everyone,

Has anyone had the problem of continuous recording on the 7D where it won't stop recording? I've read about it here on the forum, but am wondering if there is some sort of fix to this? I'm worried about bricking my camera because I have to turn it off because it won't stop recording even if I hit stop. This is with Auto Restart on in Movie Tweaks. I use this in combination with the T3i to record long events, and the T3i has never had this issue. If someone could reply that would be awesome. If I need to replicate this issue in order to help solve it I can certainly do that. Thanks.

- Paul Harwood

Walter Schulz · « **Reply #1307 on:** December 30, 2016, 03:07:47 AM »

Issue 2065 reported July 2014. See workaround in last post.

PaulHarwood856 · « **Reply #1308 on:** December 30, 2016, 03:10:48 AM »

Hey Walter Schulz,

Thanks so much for your quick reply! Ok great, I'll make sure to try this. Awesome!

- Paul Harwood

MarioneRosso · « **Reply #1309 on:** December 30, 2016, 03:28:52 PM »

Hi,
if I have 2.0.6 firmware on my Canon 7D... what can I do ?

Avenger 2.0 · « **Reply #1310 on:** December 31, 2016, 09:29:46 PM »

Has something changed for 3x crop h264 video in 3 Dec nightly? I can't find the setting anymore to enable it.
Edit: I guess I was mistaken and it was never possible on 7D...

N/A · « **Reply #1311 on:** January 03, 2017, 06:59:17 PM »

Quote

I have confirmed this works! Thank you so much N/A!

I have provided a Google Drive Link to a folder with screenshots, pictures, and videos showing the beauty of this:

https://drive.google.com/drive/folders/0Bz5n0qYxIkVOMnJMeWhkU3pMVjQ?usp=sharing

The videos are of my cat in my room, handheld at 50mm. Sorry for the shakiness, I just wanted to test this out with the time I had. I was able to record for 15 seconds.

If anyone has any questions, or can't get to the link please let me know. Thank you to all the Magic Lantern Developers, this is truly awesome!

- Paul Harwood

Very welcome

arrinkiiii · « **Reply #1312 on:** January 03, 2017, 10:04:48 PM »

Hi,

I trie today the new comp from dfort and its in the same, if some one ask. With MLV or RAW Module in 10 or 12bits you got the upper pink stripe thing.

*But in crop mode (x5) you can record in 10 and 12bits, wow. The problems that i find in crop mode (x5) is that wend you review the file in camera the exposure are more low then wend you recorded and show in the camera screen and the colores look that go's to sepia tones... Also mostly of the times wend you hit the rec the screen freeze.

Until someone find the slurp for the 7D we are like this... only in 14bit's that i must say it's gorgeous!!! 10bits you can have the same quality but less heavier files... and more frame rates YEAHHH =))

Brawl · « **Reply #1313 on:** January 09, 2017, 12:33:39 PM »

Hi arrinkiiii nice to hear someone is deeply testing it. I really hope will be possible to fix all the bugs!

guys is there some chance for MLV dual ISO on 7D? I saw some examples about 5DMIII recovering shadows single iso vs. dual iso and the creativity possibilities with the second one are outstanding. if I remember correctly dual iso requires a lot of bandwidth MLV 10 and 12 bit could help?

arrinkiiii · « **Reply #1314 on:** January 11, 2017, 01:28:16 AM »

I think one or no one person are working in the 7D. Dual processor inferno thing... I think with the low princes for a 2hand 5DIII is better to have full ML features... but then, the glass.

Brawl · « **Reply #1315 on:** January 11, 2017, 11:29:57 AM »

@Arrinkiiii being honest my economic problems are so huge that I could never watch to better dslr or black magic. I'll really keep my fingers crossed!

nikfreak · « **Reply #1316 on:** January 11, 2017, 11:54:24 AM »

Quote from: Brawl on January 09, 2017, 12:33:39 PM

guys is there some chance for MLV dual ISO on 7D?

You could give it a try.
waza57 got it to work on 5D2 but it's only coded for 5D2. You would have to adopt it for 7D.

Harald_Thomsen · « **Reply #1317 on:** January 12, 2017, 12:16:33 PM »

Just one question: I'm on the latest Firmware. Is it safe to go back to 2.0.3?

Gesendet von meinem HUAWEI VNS-L31 mit Tapatalk

pazitivprod · « **Reply #1318 on:** January 13, 2017, 09:31:42 AM »

hi, firends. prompt, please, with what maximum speed the chamber 7d by means of ML removes?

Brawl · « **Reply #1319 on:** January 19, 2017, 07:52:12 PM »

@nikfreak Thanks a lot for your reply unfortunetely I have no skill on programming languages.
But I could be a betatester if needed. In case I'm good to explain bugs and stuff like this also shooting videos to post on the forum.

Walter Schulz · « **Reply #1320 on:** January 19, 2017, 09:39:20 PM »

@pazitivprod: Unable to understand your question. Please rephrase and/or add text in your native language.

Brawl · « **Reply #1321 on:** January 21, 2017, 09:59:00 PM »

hi guys may you suggest me your best settings for shooting mlv raw video at 48 fps or more please?

DeafEyeJedi · « **Reply #1322 on:** January 21, 2017, 10:22:22 PM »

Per @N/A -- https://www.magiclantern.fm/forum/index.php?topic=9848.msg146710#msg146710

Brawl · « **Reply #1323 on:** January 21, 2017, 11:21:23 PM »

Thanks a lot @DeafEyeJedi I did a quick test at 60fps I get a lot of tearing. Is this natural for anyone or I did something wrong in the settings?

DeafEyeJedi · « **Reply #1324 on:** January 21, 2017, 11:21:48 PM »

Which build are you using?

News:

Author Topic: Canon 7D Mark I (Read 1072644 times)