Author Topic: [DONE] How do I dump 5D3 firmware 1.2.3? (Read 99291 times)

a1ex · « **Reply #50 on:** February 10, 2014, 02:18:24 PM »

Quote from: pompeiisneaks on February 05, 2014, 04:39:17 AM

1 is 1080p and had horrid colors all messed up. 2 is just fine, right after the first failure, and 3 is at a lower resolution so that I could record to my slower card. It also was all messed up.

I've got these artifacts today with silent pictures. Couldn't find a way to reproduce them though.

pompeiisneaks · « **Reply #51 on:** February 10, 2014, 07:07:06 PM »

Good to know I'm not the only one. a1ex, are you using the 1.2.3 build on 5D3 or is this something global?

~Phil

a1ex · « **Reply #52 on:** February 10, 2014, 07:11:20 PM »

I took thousands of silent pictures back then with 1.1.3 (before raw_rec) and I don't remember seeing them.

Can't tell if it's a quirk in 1.2.3 or something introduced in latest ML code (first I need a way to reproduce them, then I can downgrade to 1.1.3 and try the same thing).

marekk · « **Reply #53 on:** February 10, 2014, 09:05:51 PM »

chris_miller corrected RAW_TYPE_ADDRESS 1 hour ago, maybe it will help

a1ex · « **Reply #54 on:** February 10, 2014, 09:07:28 PM »

Didn't help. I've reproduced it with silent pics in burst mode, and sometimes slit-scan.

Went back to 113, everything clean.

marekk · « **Reply #55 on:** February 10, 2014, 09:26:27 PM »

As far I remeber this function removed all bad frames on 60D:
/* get exclusive access to our edmac channels */
edmac_memcpy_res_lock();

Maybe they changed something with edmac ?

a1ex · « **Reply #56 on:** February 10, 2014, 09:33:49 PM »

Some bad pictures were in slit-scan mode, where I'm not doing any kind of EDMAC trickery. That code works with plain old memcpy from Canon's buffer.

I should probably run some tests without any ML code loaded (from a minimal boot-hack).

Jason Montalvo · « **Reply #57 on:** February 11, 2014, 11:19:38 AM »

Quick question, I recently got my camera back from a clean and check from canon where I specifically asked them not to upgrade my firmware. they complied and left it alone, but when I got it back, I had to reload ML on the camera.

Now since i've reloaded ML the ML card has to always be in the camera or I get:

"Update file error. Please check the memory card and reload the battery and try again"

I've tried putting reenabling the boot flag made my sd card bootable again with no such luck. The reason I discovered was because I was trying to update to 1.2.3

Thanks in advance !

primemultimedia · « **Reply #58 on:** February 11, 2014, 01:36:49 PM »

Getting clean hdmi recording and raw recording so far

Going to do some test with both at once $:-\$

rigs · « **Reply #59 on:** February 11, 2014, 03:02:48 PM »

123 clean HDMI works well with ninja2. Tested crop modes at x5 & x10, they record to ninja cropped while recording raw & MLV, but at a reduced frame size. Would be nice to have timecode active to trigger ninja2 when shutter is pressed. More testing to come.

a1ex · « **Reply #60 on:** February 11, 2014, 03:30:51 PM »

Corrupted frames fixed hopefully; please test and let me know if it actually works.

http://www.magiclantern.fm/forum/index.php?topic=10443

Audionut · « **Reply #61 on:** February 12, 2014, 10:04:52 AM »

An updated build. This one comes with the same warranty as the last build.

https://dl.dropboxusercontent.com/u/34113196/ML/Builds/magiclantern-v2.3.NEXT.2014Feb11.5D3123.zip

MA Visuals · « **Reply #62 on:** February 12, 2014, 03:29:55 PM »

Quote from: Audionut on February 12, 2014, 10:04:52 AM

An updated build. This one comes with the same warranty as the last build.

https://dl.dropboxusercontent.com/u/34113196/ML/Builds/magiclantern-v2.3.NEXT.2014Feb11.5D3123.zip

Does this build include the pink frame fix Alex recently implemented?

Audionut · « **Reply #63 on:** February 12, 2014, 05:20:34 PM »

It's compiled to commit 75b8736.

VisualPursuit · « **Reply #64 on:** February 13, 2014, 08:31:14 AM »

Can someone set up a platform entry 5D3_1.2.3 for these new builds in the nightlies?

While making it user friendly takes ressources from development, it also frees
resources through preventing double and triple questions about ML in first place.

Thanks everybody for your great work.

Also: What needs to be done to solve the bootflag problem?
Laying out the problems regarding porting stubs and record restart
helped chris_miller and viciniusatique to contribute.

Maybe a quick word on this could be helpful.

Regards, Michael Quack

a1ex · « **Reply #65 on:** February 13, 2014, 08:42:48 AM »

Please don't rush it. If you want to provide feedback on the early builds, please do. If not, stay calm.

marekk · « **Reply #66 on:** February 13, 2014, 10:22:41 AM »

I know it's a stupid question but how can I download ML repo files and then update it with modifications from pull request "#354: Ported ML over to 5D3 firmware 1.2.3." using hg ?

Audionut · « **Reply #67 on:** February 13, 2014, 10:27:53 AM »

Probably easier just to build straight from the 1.2.3 repo: https://bitbucket.org/chris_miller/magic-lantern/overview

marekk · « **Reply #68 on:** February 13, 2014, 10:33:20 AM »

Quote from: Audionut on February 13, 2014, 10:27:53 AM

Probably easier just to build straight from the 1.2.3 repo: https://bitbucket.org/chris_miller/magic-lantern/overview

I'm not sure if all commits are pushed to this repo, for example latest memory backend..

a1ex · « **Reply #69 on:** February 13, 2014, 11:13:57 AM »

I've just updated it with the latest bleeding-edge stuff.

However, the memory backend is not as rock-solid as on 60D (it fails at g3gg0's tests after less than a minute).

marekk · « **Reply #70 on:** February 13, 2014, 12:16:51 PM »

Quote from: a1ex on February 13, 2014, 11:13:57 AM

I've just updated it with the latest bleeding-edge stuff.

However, the memory backend is not as rock-solid as on 60D (it fails at g3gg0's tests after less than a minute).

thx a1ex
is there any impact to MLV_REC ?

a1ex · « **Reply #71 on:** February 13, 2014, 12:25:45 PM »

I don't know, you should tell me that

What I know right now is that we have a memory leak with repeated malloc(16MB)/free calls, but the underlying call (_shoot_malloc/_shoot_free) is fine. If you want to help me track it down, you are welcome.

a1ex · « **Reply #72 on:** February 13, 2014, 01:38:56 PM »

Fixed the leak.

marekk · « **Reply #73 on:** February 13, 2014, 03:03:36 PM »

I can test something on new firmware after work. Any suggestions ?

a1ex · « **Reply #74 on:** February 13, 2014, 03:48:15 PM »

Anything that was touched in recent changesets

News:

Author Topic: [DONE] How do I dump 5D3 firmware 1.2.3? (Read 99291 times)