Author Topic: Canon EOS M  (Read 1529831 times)

Walter Schulz

  • Contributor
  • Hero Member
  • *****
  • Posts: 8421
Re: Canon EOS M
« Reply #1800 on: January 13, 2022, 02:53:34 PM »
I would like to ask if any devs are around about possible future developments on certain areas.

You should ask questions related to Danne's builds for EOS M in this thread: https://www.magiclantern.fm/forum/index.php?topic=25781.3050

kob

  • New to the forum
  • *
  • Posts: 6
Re: Canon EOS M
« Reply #1801 on: February 11, 2022, 05:39:28 AM »
Is there a "quick delete" option for the last recorded file ?

need to frequently & quickly delete the last recording (to save on card space).

This is for capturing live action. 

Veerle

  • Member
  • ***
  • Posts: 113
Re: Canon EOS M
« Reply #1802 on: February 17, 2022, 04:29:56 PM »
I think I did something very stupid...

I had a spare EOS M that I wanted to sell, so I wanted to remove ML. In order to do so: I downloaded the 2.0.3 firmware and installed it on the camera. Then I got a message on the screen (from ML) saying: model detection error. Your camera doesn't look like a EOSM 2.0.2. (no shit).
What you can do:
- Make sure you've got the right ML zip for you camera model.
- If in doubt, upgrade (or downgrade) your Canon firmware to 2.0.2 (again).
- To use your camera without ML, format this card from your computer.
You may remove your battery.


So I formatted my card on my computer (cause I wanted to use it without ML), inserted it again, then: nothing. Just a continuing blinking green light.

I tried putting the 2.0.2 firmware on my card, but there's no way to install it now... Just a black screen with a blinking light...


Does anyone have any ideas on how I can fix this?

Walter Schulz

  • Contributor
  • Hero Member
  • *****
  • Posts: 8421
Re: Canon EOS M
« Reply #1803 on: February 17, 2022, 04:50:02 PM »
Remove battery.
Use EOScard (Windows) or Make_bootable.sh (macOS/Linux) to create a bootable card.
Copy extracted ML build for firmware 2.0.3 to card.
https://web.archive.org/web/20200622002229/https://bitbucket.org/daniel_fort/magic-lantern/downloads/magiclantern-Nightly.2017Jan13.EOSM203.zip
Insert card, insert battery, close compartment doors and follow instructions found in wiki.magiclantern.fm/faq to deinstall ML from camera: "To remove the bootflag, run Firmware Update from a ML card and follow the instructions."

Veerle

  • Member
  • ***
  • Posts: 113
Re: Canon EOS M
« Reply #1804 on: February 17, 2022, 06:22:32 PM »
Remove battery.
Use EOScard (Windows) or Make_bootable.sh (macOS/Linux) to create a bootable card.
Copy extracted ML build for firmware 2.0.3 to card.
https://web.archive.org/web/20200622002229/https://bitbucket.org/daniel_fort/magic-lantern/downloads/magiclantern-Nightly.2017Jan13.EOSM203.zip
Insert card, insert battery, close compartment doors and follow instructions found in wiki.magiclantern.fm/faq to deinstall ML from camera: "To remove the bootflag, run Firmware Update from a ML card and follow the instructions."

Thank you Walter, I was able to fix it!

liuk718

  • New to the forum
  • *
  • Posts: 12
Re: Canon EOS M
« Reply #1805 on: March 08, 2022, 02:09:57 PM »
Here is the latest ML version M1 2.0.2 backup from my pc, if anyone needs this:

[Walter Schulz: Link removed. Requires account, unknown content, description unclear. Intention unclear.]

lightspeed

  • Freshman
  • **
  • Posts: 61
Re: Canon EOS M
« Reply #1806 on: March 20, 2022, 01:42:44 AM »
For rolling shutter.

would it be possible to have the sensor read sideways? this way there would be rolling shutter up and down but not side to side.

Walter Schulz

  • Contributor
  • Hero Member
  • *****
  • Posts: 8421
Re: Canon EOS M
« Reply #1807 on: March 20, 2022, 02:44:38 AM »
Nope.

names_are_hard

  • Developer
  • Hero Member
  • *****
  • Posts: 506
  • 200D idiot
Re: Canon EOS M
« Reply #1808 on: March 20, 2022, 03:03:29 PM »
It's more likely that you could capture a "portrait" aspect ratio, and rotate the camera 90 degrees, for the same effect.

lightspeed

  • Freshman
  • **
  • Posts: 61
Re: Canon EOS M
« Reply #1809 on: March 24, 2022, 07:24:44 PM »
Could you then change the aspect ratio? So it would be 1080 x 1920

Aspuio

  • Just arrived
  • *
  • Posts: 1
Re: Canon EOS M
« Reply #1810 on: April 21, 2022, 08:52:32 PM »
Hi. I currently have eosm1 and no to little scripting experience. What can I do to contribute? Maybe run some tests? I'm using ML for a bit now, primarly for taking photos. Using WB (auto and manual), exp sim, thats great futures, thank you guys for doing this.

feketeg

  • New to the forum
  • *
  • Posts: 5
Re: Canon EOS M
« Reply #1811 on: June 09, 2022, 10:10:38 PM »
Hey guys!

Feel free to check out my first eos m footage from Malta. I struggled a lot with finding focus in bright sunlight as you can tell. I'm not really satisfied with the final results, I made several mistakes. I couldn't manage to turn IS on the whole time, so I had to stabilize it in Davinvci, thats why it is falling apart in some shots. I also noticed that in 5k frtp mode the AF focuses at the center of the screen and not the center of liveview.

I'd like to ask some advice from you guys with the following;
- any idea why I can't turn IS on?
- can I use AF+MF somehow when recording video?
- why does the black crop jumping up and down after stabilization?



seguracine

  • New to the forum
  • *
  • Posts: 5
Re: Canon EOS M
« Reply #1812 on: July 12, 2022, 06:54:40 PM »
Hello friends, I have the Eos M6 Mark II, do you know if there is any magic flashlight for it?

Walter Schulz

  • Contributor
  • Hero Member
  • *****
  • Posts: 8421
Re: Canon EOS M
« Reply #1813 on: July 12, 2022, 06:59:28 PM »
AFAIK nobody is working on it.
Ask again in spring 2023 or begin to learn how to develop ML.

Public warning: One more crosspost/spam -> Banned!

dpjpandone

  • Senior
  • ****
  • Posts: 287
Re: Canon EOS M
« Reply #1814 on: September 26, 2022, 11:08:52 PM »
Has anyone notice that MLV files ignores the gain settings in canon audio menu? I recorded some clips at a concert saturday night and adjusted the gain in the canon menu, my .h264 files have the correct volume, but the raw videos I shot are all distorted.