Author Topic: Canon EOS M  (Read 1120087 times)

Kgncom

  • New to the forum
  • *
  • Posts: 18
Re: Canon EOS M
« Reply #4625 on: October 24, 2020, 08:08:04 PM »
Is there MLV pixel maps out for the 5kfrtp mode Yet? Just shot some stuff but realized the built in focus pixel removing tool wasn’t having an effect. My resolution is 1120x1890, should I post a framegrab fo you guys?
70D | EOSM

Danne

  • Contributor
  • Hero Member
  • *****
  • Posts: 6959
Re: Canon EOS M
« Reply #4626 on: October 24, 2020, 08:19:12 PM »
You need the latest map files. Add them inside mlv app.
https://bitbucket.org/Dannephoto/mlv_app_compiler-git/downloads/

Danne

  • Contributor
  • Hero Member
  • *****
  • Posts: 6959
Re: Canon EOS M
« Reply #4627 on: October 24, 2020, 10:01:49 PM »
Yet another build:
https://www.magiclantern.fm/forum/index.php?topic=9741.msg208959#msg208959

Added 2k 1:1 crop frtp(uncropped realtime preview) built by theBilalFakhouri. Took a while getting ratios working here. Also took a dive to see if I could understand how to exclude bvram cached cropmarks?? 16:9 cropmarks always reappearing after finishing recording. Cannot find out how to exclude them so now I am using some workarounds including clrscr(); and whatnot to ba able and get a somewhat clean 1:1 1920x1280 preview :).

2blackbar

  • Senior
  • ****
  • Posts: 426
Re: Canon EOS M
« Reply #4628 on: October 24, 2020, 10:04:47 PM »
Ill test this build but in one before it i still have problems with full sensor pink frames:
in HD 1080
- turn off aspect ratio so its full sensor recording.
-12 bits
- fps override exact fps 23.976.

I get quite a lof pink frames with that.
no histogram , no digic sharpening etc. just these above changed.
I recorded full sensor quite a bit about year ago, never had so many pink frames.

Danne

  • Contributor
  • Hero Member
  • *****
  • Posts: 6959
Re: Canon EOS M
« Reply #4629 on: October 24, 2020, 10:22:29 PM »
Seek what is working. I would not trust fps override with those settings. My suggestion is you test:
1 - Set only to 24 fps in canon menu and leave it there
2 - Try to record with 14bit.
If those settings are working try also 12bit. If still working without corruption it´s time to test to use fps override.

Sorry, I really can´t work with reports what was working a year ago. I just tested and my suggestion 1 and 2 works without corruption. Also 12bit works. Didn´t try fps override cause I know it sometimes fails, sometimes works with crop rec.

if you are having corruption still without fps override enabled let me know as well.

EDIT: Also helps to get sample mlv files to check what was filmed and so on.

EDIT: Tested fps override and still no corrupted frames.

oercruz

  • New to the forum
  • *
  • Posts: 3
Re: Canon EOS M
« Reply #4630 on: October 25, 2020, 02:17:33 AM »
Hi People.
 Im pretty new to ML. Never installed in any camera.
I´ve bought a EOS M to test. But it came with 2.0.3 and I understand theres no build for that FW.
So, I wanted to bother, and ask for guidance.

1. Is there a way to downgrade to 2.0.2?
2. Is there some sort of way to install the ML in 2.0.3?

Thanks in advance for your help.
My goal is to install that too in a 6D, but just after test on EOS M.
Thanks for any possible help!

OC.


Walter Schulz

  • Contributor
  • Hero Member
  • *****
  • Posts: 7606
Re: Canon EOS M
« Reply #4631 on: October 25, 2020, 08:41:17 AM »
1): Via Canon firmware upgrade.
2): Yes, there is a custom build for 2.0.3.
      But newest developments are for 2.0.2 and have not been ported to 2.0.3.

oercruz

  • New to the forum
  • *
  • Posts: 3
Re: Canon EOS M
« Reply #4632 on: October 25, 2020, 05:16:00 PM »
Thanks Walter!
Glad to know that theres both options.
But, as I stated... Im pretty knew to this. Can you point me in the right direction?
Not sure what is the best, as I read you I think it'll be to down grade to 2.0.2 and use the ML to that FW... What do you think?

If thats so... Do you have some info about that way?

Thanks a lot for your help!

OC.

names_are_hard

  • Contributor
  • Senior
  • *****
  • Posts: 293
  • 200D idiot
Re: Canon EOS M
« Reply #4633 on: October 26, 2020, 02:28:25 AM »
Yes, you can downgrade to 2.0.2, and this is the best plan for testing ML.  You can always upgrade to 2.0.3 later if you want (this will make ML designed for 2.0.2 stop working).

Download the official Canon "upgrade" for 2.0.2 and install it in the usual way.

vstrglv

  • Member
  • ***
  • Posts: 232
Re: Canon EOS M
« Reply #4634 on: October 27, 2020, 08:42:40 PM »
My test 5k anamorphic frtp 1280X2160, 10bit, Danne's build 2020oct23EOSM202
1. MLVApp 1.11-exposure, contrast, saturation, white balance, Width and Height Stretch -1.0. Exported as ProRes 4444.
2.Topaz Video Enhance Al 1.6.1, Artemis HQ, 200%(2560X4320), png(8bit lossless).
3a Adobe premiere pro v.14.5. Sequence 2560X1440, Scale Height 33.3%, Scale Width 100%. Export 2560X1440
3b Adobe premiere pro v.14.5. Sequence 1920X1080, Scale Height 33.3%, Scale Width 100%. Export 1920X1080. This is 1920x1080 crop from the previous 2560X1440 video.The resolution is good for me. Thank you very much Danne.
Canon 5D3,1.1.3; Canon EOS M,202,  CF-SanDisk Extreme PRO,160MB/s, 256GB, SD-SanDisk Extreme Pro, 170MB/s, 128GB.

Art1203

  • Just arrived
  • *
  • Posts: 1
Re: Canon EOS M
« Reply #4635 on: October 28, 2020, 04:04:55 PM »
So I tried search feature and couldn't find so I'm gonna ask.

Has anyone found out how to get a Canon M50 update to get a clean HDMI out with autofocus and disable the 30 minute timeout

oercruz

  • New to the forum
  • *
  • Posts: 3
Re: Canon EOS M
« Reply #4636 on: October 31, 2020, 05:32:23 AM »
Hi again.
Now, I did managed to downgrade to 202 and I have the ML ready to install. But I read something about ML "persistent changes"... So, I wanted to ask, what means "persistent" specifically.

Seems that ML is more complex to use than I imagined and its taking me a hard time.
Thanks in advance guys.


yokashin

  • Member
  • ***
  • Posts: 102
Re: Canon EOS M
« Reply #4637 on: October 31, 2020, 06:36:09 AM »

Walter Schulz

  • Contributor
  • Hero Member
  • *****
  • Posts: 7606
Re: Canon EOS M
« Reply #4638 on: October 31, 2020, 07:31:49 AM »
But I read something about ML "persistent changes"... So, I wanted to ask, what means "persistent" specifically.

50D will be enabled to do video. And this will be persistent.

rev787

  • New to the forum
  • *
  • Posts: 6
Re: Canon EOS M
« Reply #4639 on: October 31, 2020, 09:43:23 AM »
Tried dual iso again, but got purple stripes across over exposed sun. Both cr2hdr and mlvapp gave me same result. Is this a known issue?
1 frame sample: https://mega.nz/#!k0JFHAhI!fB0cCZTVDRxPiId9ilx-JvNkWNZPZW1HmWxiCLuEinQ

ctfire

  • New to the forum
  • *
  • Posts: 48
Re: Canon EOS M
« Reply #4640 on: November 01, 2020, 12:16:51 PM »
hello everyone, is anyone know how to make process of converting dual iso mlv videos quicker than MLVAPP is converting on my windows PC it takes 1 minute for 1 sec of dual iso video

masc

  • Contributor
  • Hero Member
  • *****
  • Posts: 1719
Re: Canon EOS M
« Reply #4641 on: November 01, 2020, 12:54:38 PM »
hello everyone, is anyone know how to make process of converting dual iso mlv videos quicker than MLVAPP is converting on my windows PC it takes 1 minute for 1 sec of dual iso video
Open as many instances of MLVApp as you have CPU cores, and render in parallel. No faster processing available. Current DualIso algorithms are single threaded.
5D3.113 | EOSM.202

Gotflores

  • Just arrived
  • *
  • Posts: 1
Re: Canon EOS M
« Reply #4642 on: November 02, 2020, 09:33:14 PM »
Don't think older builds works better. If so it would be good if you could present these two builds compared. Would be good also to test against an official build but right now there's simply too many variables not tested to draw any conclusions.
On a general level, thanks for feedback. If we want this fixed more work is waiting...


Hello, I actually wanted to mention that I recently got the builds that Zeek shared, and the Monitor issue is also persisting for my monitor (feelworld 4k) as well. I have to reset it about 5-10 times before it gets stable, but notice that the live view while on the monitor appears to be zoomed in, than when compared to the liveview through the camera LCD. Was wondering what I might be able to provide to see what the issue might be with the EOS M and monitor setup?

IDA_ML

  • Hero Member
  • *****
  • Posts: 885
Re: Canon EOS M
« Reply #4643 on: November 04, 2020, 11:09:51 PM »
Can someone please give me a link to the latest EOS-M focus pixel maps?  Thanks.

Pacerx999

  • New to the forum
  • *
  • Posts: 12
Re: Canon EOS M
« Reply #4644 on: November 04, 2020, 11:34:27 PM »
Can someone please give me a link to the latest EOS-M focus pixel maps?  Thanks.

Latest focus pixel maps:
https://bitbucket.org/Dannephoto/mlv_app_compiler-git/downloads/

IDA_ML

  • Hero Member
  • *****
  • Posts: 885
Re: Canon EOS M
« Reply #4645 on: November 05, 2020, 07:20:29 AM »

masc

  • Contributor
  • Hero Member
  • *****
  • Posts: 1719
Re: Canon EOS M
« Reply #4646 on: November 05, 2020, 08:05:46 AM »
Can someone please give me a link to the latest EOS-M focus pixel maps?  Thanks.
You also find them in the MLVApp repos.
https://github.com/ilia3101/MLV-App/tree/master/pixel_maps

If you use the latest revision of MLVApp, it auto-installs all needed maps. So you never need any link again ;)
5D3.113 | EOSM.202

Danne

  • Contributor
  • Hero Member
  • *****
  • Posts: 6959
Re: Canon EOS M
« Reply #4647 on: November 05, 2020, 10:05:31 AM »
Is it poossible to do update check with checksum instead of timestamp? Or even simple name matching would be suffuicient? Right now I need to update files although I always have my latest pack of focus pixel maps.

IDA_ML

  • Hero Member
  • *****
  • Posts: 885
Re: Canon EOS M
« Reply #4648 on: November 05, 2020, 10:14:44 AM »
Thanks, Masc., very useful video.  In fact, I was aware of it but I am not sure that the focus pixel map repository gets updated every time new resolutions are implemented in the latest builds.  I experienced this several times already when working with the latest build of the 100D.  On some of the resolutions, I don't get focus pixels and everything works fine.  On others, I do have them and have to clean them up manually using the Chroma smooth feature.  And since I also use MLVFS a lot, I prefer to 
download and manually install the entire FPM package.  MLVFS automatically applies the required fpm files to the footage and works perfectly OK. 

masc

  • Contributor
  • Hero Member
  • *****
  • Posts: 1719
Re: Canon EOS M
« Reply #4649 on: November 05, 2020, 10:17:20 AM »
@Danne: we check with sha checksum, and install if it isn't identical to the installed map (if it already exists).
@IDA_ML: all existing maps are in this repository. If it is not there, you'll problably won't find it on another place.
5D3.113 | EOSM.202