Author Topic: Canon EOS M  (Read 932428 times)

masc

  • Contributor
  • Hero Member
  • *****
  • Posts: 1508
Re: Canon EOS M
« Reply #3125 on: July 19, 2019, 08:39:28 PM »
With this maxIso thing it seems to work. Tried 2 clips, OFF->ISO3200 (shown in liveview and in clip) and ON->ISO800 (in both).
But if I remember right, I saw that in past - the liveview showed e.g. ISO800 and it was ISO640 or something. It seems it shows just the 100,200,400,800,1600,3200,6400 in liveview. Is it that what you mean?
5D2.212 | EOSM.202

Danne

  • Contributor
  • Hero Member
  • *****
  • Posts: 6271
Re: Canon EOS M
« Reply #3126 on: July 19, 2019, 08:49:35 PM »
Gotta check some more. I tested when iso was at 800+ then at iso 200, both came out iso 800.

masc

  • Contributor
  • Hero Member
  • *****
  • Posts: 1508
Re: Canon EOS M
« Reply #3127 on: July 19, 2019, 08:57:51 PM »
Okay... no, haven't see this so far.
5D2.212 | EOSM.202

gravitatemediagroup

  • Member
  • ***
  • Posts: 241
Re: Canon EOS M
« Reply #3128 on: July 19, 2019, 10:20:57 PM »
2.5k 2520x1418

How are you achieving continuous recording in that resolution? I've never got more than a couple seconds before it stops.  The sample you posted is 1920x1080

Danne

  • Contributor
  • Hero Member
  • *****
  • Posts: 6271
Re: Canon EOS M
« Reply #3129 on: July 19, 2019, 10:26:40 PM »
New version:
https://www.magiclantern.fm/forum/index.php?topic=9741.msg208959#msg208959

- Max iso preset. Restrict autoiso to iso 800 instead of cnot controlling iso skyrocketing to up to 6400


Bob Bell

  • Just arrived
  • *
  • Posts: 1
Re: Canon EOS M
« Reply #3130 on: July 19, 2019, 10:50:00 PM »
I have several EOS DSLRs but bought a Canon EOS M3. I have found that it is useless for studio work. You cannot turn off exposure simulation. This means that with studio flash (where the lighting is by the studio flash and you set manual exposure mode) the viewfinder image is black. Exp sim turns off for a split second to give AF a chance but then the exposure simulation kicks in and you get a near black image - you cannot see to compose or shoot. A typical studio setting would be f/8.0 @ ISO 200 @ 1/200s  - excellent for studio flash but lousy for the EOS M3. Exposure sim switches off if you pop up the tiny on camera flash, but that's as stupid as buying a car and then pushing it. Canon acknowledges this problem but, despite their "Pro" claims for the EOS M3 is the only maker who has not provided an option to switch off exposure sim. Canon's great advice - buy an EOS R because that has it.
Does anyone know how to fix the problem or has a Magic Lantern app that can disable exposure simulation?

I think that Magic Lantern is not available for the EOS M3.

Any help that anyone can give will be appreciated. I bought the M3 to do high speed photography where high speed flash (1/40,000 s) is the main light source.

Walter Schulz

  • Contributor
  • Hero Member
  • *****
  • Posts: 7072
Re: Canon EOS M
« Reply #3131 on: July 20, 2019, 12:15:40 AM »
https://builds.magiclantern.fm/ -> "Your camera is not listed?" -> Last item
Photogs and videographers: Assist in proof reading upcoming in-camera help!. Your input is wanted and needed!

ZEEK

  • Member
  • ***
  • Posts: 227
Re: Canon EOS M
« Reply #3132 on: July 20, 2019, 01:29:24 AM »
- Max iso preset. Restrict autoiso to iso 800


Brilliant work! I just installed the July 18 ml build last night. It's fantastic, especially with the x10 focus aid. I think the only issue for that is as mentioned previously, in non MCM Rewire modes where you need to half press the shutter to preview correct frame e.g. on 2.5k or 4k mode. Unless I've missed something..
The auto ISO tool max 800 is definitely great! :)
EOS M - EOS M2 - 5D2

marcelolippi

  • New to the forum
  • *
  • Posts: 42
Re: Canon EOS M
« Reply #3133 on: July 20, 2019, 01:47:42 AM »
today I did some quick tests with the eos M (4.5k 10bit lossless) and the red helium 16 bit in 4 and 8k. Luminous scene, ettr ... the eos has made a good figure working with 6bit less and compressed, the thing that struck me negatively was the alias, practically I saw a scale for the 3x1, maybe something I didn't set well in the mlvapp?

Danne

  • Contributor
  • Hero Member
  • *****
  • Posts: 6271
Re: Canon EOS M
« Reply #3134 on: July 20, 2019, 06:21:24 AM »
Examples please @marcelolippi.
@ZEEK Not quite following you here, x10 xoom works the same with all presets. Press halfshutter to activate it. Could you elaborate?

ricardopt

  • Freshman
  • **
  • Posts: 89
Re: Canon EOS M
« Reply #3135 on: July 20, 2019, 09:27:14 AM »
I think he's trying to say that on 2.5 and 4k the half press shutter is also used to preview the correct framing, how will it do both functions on half press?

Danne

  • Contributor
  • Hero Member
  • *****
  • Posts: 6271
Re: Canon EOS M
« Reply #3136 on: July 20, 2019, 09:38:17 AM »
Did you test?
If you start off in framing preview x10 zoom will work nicely. If you start off in real time preview then you loose the framing preview but only when not recording. Once recording camera acts without x10 zoom.

Danne

  • Contributor
  • Hero Member
  • *****
  • Posts: 6271
Re: Canon EOS M
« Reply #3137 on: July 20, 2019, 12:15:39 PM »
New build, usual place:

- Autoiso now have a few friends


EDIT: uploaded new build again. Fixing automation conflict.

2blackbar

  • Senior
  • ****
  • Posts: 307
Re: Canon EOS M
« Reply #3138 on: July 20, 2019, 03:43:25 PM »
This is great, i wanted it since the beginning of ML.

Danne

  • Contributor
  • Hero Member
  • *****
  • Posts: 6271
Re: Canon EOS M
« Reply #3139 on: July 20, 2019, 09:04:52 PM »

2blackbar

  • Senior
  • ****
  • Posts: 307
Re: Canon EOS M
« Reply #3140 on: July 20, 2019, 10:42:06 PM »
3x halfshutter toggle doesnt work in this and previous one.But i get the message that photo is not possible in zoom mode when i press shutter button all the way.
With build from july 11 toggle 3x works fine.

masc

  • Contributor
  • Hero Member
  • *****
  • Posts: 1508
Re: Canon EOS M
« Reply #3141 on: July 20, 2019, 10:48:56 PM »
x3zoom works with trashcan. x10zoom with halfshutter.
5D2.212 | EOSM.202

2blackbar

  • Senior
  • ****
  • Posts: 307
Re: Canon EOS M
« Reply #3142 on: July 20, 2019, 10:57:16 PM »
thanks, i forgot it was changed
How i can map ISO selector to one of the buttons on camera, i had it as trashcan from canon menu, now i cant change iso that easily cause im locked out of it by 3x trashcan toggle, my -/+ button is unused.

ZEEK

  • Member
  • ***
  • Posts: 227
Re: Canon EOS M
« Reply #3143 on: July 21, 2019, 01:35:34 AM »
Examples please @marcelolippi.
@ZEEK Not quite following you here, x10 xoom works the same with all presets. Press halfshutter to activate it. Could you elaborate?

I just mean when you want real time preview in 2.5k, 4k or 5k modes through a half press shutter to view the correct framing, it will instead go into x10 zoom. Unless there is an alternayive key that can be set. No big deal here, though great stuff with the auto ISO.
EOS M - EOS M2 - 5D2

Danne

  • Contributor
  • Hero Member
  • *****
  • Posts: 6271
Re: Canon EOS M
« Reply #3144 on: July 21, 2019, 01:57:57 AM »
Yeah, I guess one has to start off in framing preview mode when using x10 zoom in x5 modes. Or else no correct framing at all.

I put up a new build again. Refined previewing(autoiso)
Starting to dig autoiso quite a lot...

ricardopt

  • Freshman
  • **
  • Posts: 89
Re: Canon EOS M
« Reply #3145 on: July 21, 2019, 02:15:58 AM »
Hi everyone

Ive been unable to get rid of the pink frames using the 4.5k lua script, 16:9, 2.35 or 2.39 doesnt matter which resolution i choose, is it possible for anyone that had sucess at this resolution to share their settings, i purchased a 128gb sandisk extreme pro sdcard thinking the card i was using was at fault but same thing happens, i have kill global draw enabled, some kind of log shows up with codec error etc, in 1080 rewired theres no pink frames.



Thanks

Danne

  • Contributor
  • Hero Member
  • *****
  • Posts: 6271
Re: Canon EOS M
« Reply #3146 on: July 21, 2019, 02:30:12 AM »
Run the lua script. Once it´s done swith to the 5k anamorphic preset instead. Now you should be in 2.39:1 but not in rewired mode. Don´t enable the Kill global draw option since you won´t have framing preview to work with.

ricardopt

  • Freshman
  • **
  • Posts: 89
Re: Canon EOS M
« Reply #3147 on: July 21, 2019, 02:50:51 AM »
Thanks, just done a quick test with 5 short recording, 4 were clean, 1 had kind of strobing pink frames, 2am here, will format and clean install ml in the morning.

thanks

Danne

  • Contributor
  • Hero Member
  • *****
  • Posts: 6271
Re: Canon EOS M
« Reply #3148 on: July 21, 2019, 10:51:24 AM »
thanks, i forgot it was changed
How i can map ISO selector to one of the buttons on camera, i had it as trashcan from canon menu, now i cant change iso that easily cause im locked out of it by 3x trashcan toggle, my -/+ button is unused.
How are you accessing magic lantern menu if trash can button is assigned to iso?
I guess set button is a good alternative to trash can when it comes to x3 zoom.

rinski

  • New to the forum
  • *
  • Posts: 28
Re: Canon EOS M
« Reply #3149 on: July 21, 2019, 01:04:05 PM »
Hello, I'm new I would like to know if you can install the firmware 2.0.2 if the machine when it comes with version 2.0.3 of canon to install the latest magic latern, thank you.