« previous next »
Pages: 1 ... 55 56 [57] 58 59 ... 75

Author Topic: Canon EOS M  (Read 1669044 times)

garry23

  • Contributor
  • Hero Member
  • *****
  • Posts: 2218
Re: Canon EOS M
« Reply #1400 on: February 02, 2018, 08:42:55 PM »
I may have spotted an error in a dropped zero.

Assuming aperture is in tenths, the new diffraction approach, which drops the mag term, should have one less zero than the old one, ie to get it in tenths.

Code: [Select]
const uint64_t  diff = (244*freq*lens_info.aperture/1000000; // Diffraction blur at infinity in tenths of a micron
This should be:
Code: [Select]
const uint64_t  diff = (244*freq*lens_info.aperture/100000; // Diffraction blur at infinity in tenths of a micron
I spotted the error as ML is reporting diffraction or 0 to 1ish, ie a magnitude out.

Sorry for the typo.

But note the Lua fix source shouldn't be using the mag term: hence I think something is wrong.
Logged

a1ex

  • Administrator
  • Hero Member
  • *****
  • Posts: 12564
Re: Canon EOS M
« Reply #1401 on: February 02, 2018, 08:45:54 PM »
Comparing to https://gist.github.com/pigeonhill/ee60d0c23b27273c0445bf1846c258a5 and the PR (found the two versions to be identical)

I did add a closing bracket, compared to your version, since it did not compile without it, but that's the only change I did.
Logged

garry23

  • Contributor
  • Hero Member
  • *****
  • Posts: 2218
Re: Canon EOS M
« Reply #1402 on: February 02, 2018, 09:04:59 PM »
@a1ex

It may be me as I'm going to the Lua Fix branch and looking in the source here: https://bitbucket.org/hudson/magic-lantern/src/97b73e7a781e78f3364555c5c30afbd3c0e5cae8/src/focus.c?at=unified&fileviewer=file-view-default

Anyway, there is an error in the diffraction equation. It needs to read this:

Code: [Select]
const uint64_t  diff = (244*freq*lens_info.aperture/100000; // Diffraction blur at infinity in tenths of a micron
Logged

dfort

  • Guest
Re: Canon EOS M
« Reply #1403 on: February 02, 2018, 10:08:36 PM »
Quote from: a1ex on February 02, 2018, 07:55:25 PM
@dfort: are you able to get Canon GUI on EOS M without loading autoexec.bin? If not, can you show me a log with "-d debugmsg" ?

No, I always get a blank grey screen. Here is the log. Looks like something around here might be a problem:

Code: [Select]
[          DL:ff0d0b04 ] (00:03) [DL] executePreDL 1stDL
[          DL:ff0cfcc0 ] (00:01) [DL] SendSerialDataToDL : 0x2a85
[          DL:ff0cfcc4 ] (00:05) [DL] localCreateSerialIOChannelForDLIC
[    PowerMgr:ff0d050c ] (00:03) [DL] EndChangeFreqCBR 0x46370 750
[          DL:ff0cfda0 ] (00:05) [DL] localCreateSerialIOChannelForDLIC
[          DL:ff0cfda0 ] (00:05) [DL] localCreateSerialIOChannelForDLIC
[          DL:ff0d0b58 ] (00:03) [DL] executePreDL Max:0x0,Min:0x0,Result:0x0
[          DL:ff0d0b74 ] (00:06) [DL] ####################################
[          DL:ff0d0b84 ] (00:06) [DL] ########## DL ERROR!!!!! ###########
[          DL:ff0d0b94 ] (00:06) [DL] ####################################
    89:   447.744 ERROR [DL] ####################################
    90:   447.744 ERROR [DL] ########## DL ERROR!!!!! ###########
    91:   447.744 ERROR [DL] ####################################
[          DL:ff0d0bf0 ] (00:03) [DL] executePreDL 2ndDL
[          DL:ff0cfcc0 ] (00:01) [DL] SendSerialDataToDL : 0x2a85
[          DL:ff0cfcc4 ] (00:05) [DL] localCreateSerialIOChannelForDLIC
[    PowerMgr:ff0d050c ] (00:03) [DL] EndChangeFreqCBR 0x46370 750
[          DL:ff0cfda0 ] (00:05) [DL] localCreateSerialIOChannelForDLIC
[          DL:ff0cfda0 ] (00:05) [DL] localCreateSerialIOChannelForDLIC
[          DL:ff0d0c44 ] (00:03) [DL] executePreDL Max:0x0,Min:0x0,Result:0x0
[          DL:ff0d0c60 ] (00:06) [DL] ####################################
[          DL:ff0d0c70 ] (00:06) [DL] ########## DL ERROR!!!!! ###########
[          DL:ff0d0c80 ] (00:06) [DL] ####################################
    98:   963.328 ERROR [DL] ####################################
    99:   963.328 ERROR [DL] ########## DL ERROR!!!!! ###########
   100:   963.328 ERROR [DL] ####################################
Logged

a1ex

  • Administrator
  • Hero Member
  • *****
  • Posts: 12564
Re: Canon EOS M
« Reply #1404 on: February 02, 2018, 10:11:19 PM »
Tried with patches.gdb, as mentioned in the guide?
Logged

garry23

  • Contributor
  • Hero Member
  • *****
  • Posts: 2218
Re: Canon EOS M
« Reply #1405 on: February 02, 2018, 10:51:38 PM »
@a1ex

Just confirmed that this commit https://bitbucket.org/hudson/magic-lantern/commits/ec86da538297c4299d3154a2e7ed7bbd56056254 has a typo error as I indicated above.

Thus with the error the diffraction is not converted to tenths of a micron, but stays in microns. Thus at the end instead of being converted back to microns, from tenths, it is incorrectly converted.

You can check this yourself by looking at the ML reported diffraction in the ML menu.

A simple fix, which I hope you can incorporate when next you update things.

This shows me the weakness of me not being able to compile myself, so I can check things. I 'just' recoded and submitted, with the error.

So this is the correct code:

Code: [Select]
const uint64_t  diff = (244*freq*lens_info.aperture/100000; // Diffraction blur at infinity in tenths of a micron
Logged

kiru

  • New to the forum
  • *
  • Posts: 3
Re: Canon EOS M
« Reply #1406 on: March 06, 2018, 05:02:57 AM »
I had installed ML 202 Feb 4 2018 build a day ago and have been shooting stills with EF-S 55-250mm STM. I have an EF-M 18-55mm STM as well so I wanted to test it for shutterbug. I am using SanDisk Ultra Plus SDXC 64GB and shot about 30+ stills with EF-M but no sign of shutterbug yet.

Can someone guide me on how to recreate shutterbug? Just trying to see if the above SD card can be cleared from the shutterbug list.



Logged

dfort

  • Guest
Re: Canon EOS M
« Reply #1407 on: March 23, 2018, 06:36:12 PM »
Quote from: a1ex on February 02, 2018, 07:55:25 PM
@dfort: are you able to get Canon GUI on EOS M without loading autoexec.bin? If not, can you show me a log with "-d debugmsg" ?

Looks like I zoned out on this. Tried to get the EOSM QEMU combination again to see if the "SET" while powering on camera issue could be reproduced in QEMU. I still can't get to the GUI much less the ML menus on the EOSM in QEMU. The lua_fix branch has the EOSM menu hack so it should work, right? Compiled with CONFIG_QEMU = y

Code: [Select]
./run_canon_fw.sh EOSM,firmware=boot=1 -s -S &
arm-none-eabi-gdb -x EOSM/patches.gdb -ex quit

DebugMsg=0x40D4 (from GDB script)
Lockdown read 0
Lockdown read 0
Lockdown read 1
Lockdown read 1
Lockdown read 2
Lockdown read 2
Lockdown read 3
Lockdown read 3
Lockdown read 4
Lockdown read 4
00000000 - 00000FFF: eos.tcm_code
40000000 - 40000FFF: eos.tcm_data
00001000 - 1FFFFFFF: eos.ram
40001000 - 5FFFFFFF: eos.ram_uncached
F0000000 - F0FFFFFF: eos.rom0
F1000000 - F1FFFFFF: eos.rom0_mirror
F2000000 - F2FFFFFF: eos.rom0_mirror
F3000000 - F3FFFFFF: eos.rom0_mirror
F4000000 - F4FFFFFF: eos.rom0_mirror
F5000000 - F5FFFFFF: eos.rom0_mirror
F6000000 - F6FFFFFF: eos.rom0_mirror
F7000000 - F7FFFFFF: eos.rom0_mirror
F8000000 - F8FFFFFF: eos.rom1
F9000000 - F9FFFFFF: eos.rom1_mirror
FA000000 - FAFFFFFF: eos.rom1_mirror
FB000000 - FBFFFFFF: eos.rom1_mirror
FC000000 - FCFFFFFF: eos.rom1_mirror
FD000000 - FDFFFFFF: eos.rom1_mirror
FE000000 - FEFFFFFF: eos.rom1_mirror
FF000000 - FFFFFFFF: eos.rom1_mirror
C0000000 - DFFFFFFF: eos.iomem
[EOS] loading './EOSM/ROM0.BIN' to 0xF0000000-0xF0FFFFFF
[EOS] loading './EOSM/ROM1.BIN' to 0xF8000000-0xF8FFFFFF
[EOS] loading './EOSM/SFDATA.BIN' as serial flash, size=0x800000
[MPU] warning: non-empty spell #30 (PROP 80030019) has duplicate(s): #34
[MPU] warning: non-empty spell #40 (PROP_VIDEO_MODE) has duplicate(s): #41

[MPU] Available keys:
- Arrow keys   : Navigation
- [ and ]      : Main dial (top scrollwheel)
- SPACE        : SET
- DELETE       : guess (press only)
- M            : MENU (press only)
- P            : PLAY (press only)
- I            : INFO/DISP (press only)
- L            : LiveView (press only)
- Shift        : Half-shutter
- 0/9          : Mode dial (press only)
- B            : Open battery door
- C            : Open card door
- F10          : Power down switch
- F1           : show this help

Setting BOOTDISK flag to FFFFFFFF
0xffff0000 in ?? ()
++macro define CURRENT_TASK   ((int)0xFFFFFFFF)
++macro define CURRENT_ISR    ((int)0xFFFFFFFF)
++macro define RTC_VALID_FLAG ((int)0xFFFFFFFF)
++macro define NUM_CORES      1
++macro define PRINT_CALLSTACK 0
++macro define MEM(x) (*(unsigned int*)(x))
++set pagination off
++set output-radix 16
++define hook-quit
++define KRED
++define KCYN
++define KBLU
++define KGRN
++define KYLW
++define KRESET
++macro define CURRENT_TASK_NAME (((int*)CURRENT_TASK)[0] ? ((char***)CURRENT_TASK)[0][9] : CURRENT_TASK)
++define print_callstack
++define print_current_location
++define print_current_location_with_callstack
++define print_formatted_string
++define DebugMsg_log
++define DebugMsg1_log
++define printf_log
++define task_create_log
++define task_switch_log
++define msleep_log
++define assert_log
++define assert0_log
++define create_semaphore_log
++define delete_semaphore_log
++define print_sem_name
++define take_semaphore_log
++define give_semaphore_log
++define create_msg_queue_log
++define print_mq_name
++define post_msg_queue_log
++define try_receive_msg_queue_log
++define receive_msg_queue_log
++define register_interrupt_log
++define register_func_log
++define mpu_decode
++define mpu_send_log
++define mpu_recv_log
++define mpu_analyze_recv_data_log
++define prop_lookup_maybe_log
++define mpu_prop_lookup_log
++define prop_print_data
++define prop_request_change_log
++define prop_deliver_log
++define try_expand_ram_struct
++define try_post_event_log
++define delayed_call_print_name
++define delayed_call_log
++define SetTimerAfter_log
++define SetHPTimerAfterNow_log
++define SetHPTimerNextTick_log
++define CancelTimer_log
++define engine_resource_description
++define engine_resources_list
++define CreateResLockEntry_log
++define LockEngineResources_log
++define AsyncLockEngineResources_log
++define UnLockEngineResources_log
++define StartEDmac_log
++define SetEDmac_log
++define print_date_time
++define set_date_time
++define load_default_date_time_log
++define rtc_read_log
++define rtc_write_log
++define CreateStateObject_log
++define state_transition_log
++define log_result
++define generic_log
++define generic_log_with_result
FFFF0800: MCR p15,0,Rd,cr9,cr1,0: XSCALE_LOCK_ICACHE_LINE <- 0x40000006 (40000000 - 40000FFF, 0x1000)
FFFF094C: MRC p15,0,Rd,cr1,cr0,0:      SCTLR -> 0x2078
FFFF094C: MCR p15,0,Rd,cr1,cr0,0:      SCTLR <- 0x12078   
FFFF4604: MCR p15,0,Rd,cr6,cr0,0:  946_PRBS0 <- 0x3F       (00000000 - FFFFFFFF, 0x100000000)
FFFF460C: MCR p15,0,Rd,cr6,cr1,0:  946_PRBS1 <- 0x3D       (00000000 - 7FFFFFFF, 0x80000000)
FFFF4614: MCR p15,0,Rd,cr6,cr2,0:  946_PRBS2 <- 0xE0000039 (E0000000 - FFFFFFFF, 0x20000000)
FFFF461C: MCR p15,0,Rd,cr6,cr3,0:  946_PRBS3 <- 0xC0000039 (C0000000 - DFFFFFFF, 0x20000000)
FFFF4624: MCR p15,0,Rd,cr6,cr4,0:  946_PRBS4 <- 0xFF00002F (FF000000 - FFFFFFFF, 0x1000000)
FFFF462C: MCR p15,0,Rd,cr6,cr5,0:  946_PRBS5 <- 0x37       (00000000 - 0FFFFFFF, 0x10000000)
FFFF4634: MCR p15,0,Rd,cr6,cr6,0:  946_PRBS6 <- 0xF700002F (F7000000 - F7FFFFFF, 0x1000000)
FFFF463C: MCR p15,0,Rd,cr2,cr0,0: DCACHE_CFG <- 0x70       
FFFF4644: MCR p15,0,Rd,cr3,cr0,0:       DACR <- 0x70       
FFFF4648: MCR p15,0,Rd,cr2,cr0,1: ICACHE_CFG <- 0x70       
FFFF464C: MCR p15,0,Rd,cr5,cr0,0:    DATA_AP <- 0x3FFF     
FFFF4654: MCR p15,0,Rd,cr5,cr0,1:    INSN_AP <- 0x3FFF     
FFFF4658: MRC p15,0,Rd,cr1,cr0,0:      SCTLR -> 0x12078
FFFF4658: MCR p15,0,Rd,cr1,cr0,0:      SCTLR <- 0xC001307D
FFFF095C: MCR p15,0,Rd,cr9,cr1,1: XSCALE_UNLOCK_ICACHE <- 0x6        (00000000 - 00000FFF, 0x1000)
FFFF095C: MRC p15,0,Rd,cr1,cr0,0:      SCTLR -> 0xC001307D
FFFF095C: MCR p15,0,Rd,cr1,cr0,0:      SCTLR <- 0xC005307D
FFFF098C: MRC p15,0,Rd,cr1,cr0,0:      SCTLR -> 0xC005307D
FFFF098C: MCR p15,0,Rd,cr1,cr0,0:      SCTLR <- 0xC005107D
MID=0xEC(fact_area=0xEC)
SD: CMD12 in a wrong state
[SDIO] Error
SD: CMD12 in a wrong state
[SDIO] Error
SD LOAD OK.
Open file for read : AUTOEXEC.BIN
SD: CMD12 in a wrong state
[SDIO] Error
SD: CMD12 in a wrong state
[SDIO] Error
File size : 0x6BFC0
Now jump to AUTOEXEC.BIN!!
0010E408: MRC p15,0,Rd,cr1,cr0,0:      SCTLR -> 0xC005107D
0010E408: MCR p15,0,Rd,cr1,cr0,0:      SCTLR <- 0xC005107D
[boot] copy_and_restart 0x9e1e0 (647648)
[BOOT] changing user_mem_start from 0x9e1c8 (647624) to 0x11d440 (1168448)
[BOOT] changing init_task from 0xff0c5484 (-15969148) to 0x9e67c (648828)
[BOOT] installing task dispatch hook at 0x3dd60 (253280)
[****] Starting task 9e67c(0) init
[BOOT] expecting armlib to overwrite E5CC8: FBFD2 (task id 20002)
[BOOT] autoexec.bin loaded at 9E1E0 - 11D440.
[BOOT] reserved 520800 bytes for ML (used 520800)
K331 READY
64K Sector FROM From BL 0xec
[SF] InstallSerialFlash 4 0xc022c0d4 0x0 0x800000 1

[SF] Bufcon Base 0xc022c0d4
SerialFlash Initialize
[BOOT] E5CC8 now contains 0, restoring FBFD2.
[****] Starting task ff0f34a4(47e82c) Startup
[****] Starting task ff0c357c(0) Startup2
[DMA1] Copy [0xF80A0000] -> [0x40540200], length [0x00000F84], flags [0x00030001]
[DMA1] OK
[DMA1] Copy [0xF8F20000] -> [0x40541400], length [0x0001132C], flags [0x00030001]
[DMA1] OK
[****] Starting task ff0c28c8(0) TaskMain
[****] Starting task 22138(47e530) DbgMgr
     0:    13.056 [STARTUP]
K331 ICU Firmware Version 2.0.2 ( 9.9.8 )
     8:    13.824 [PROPAD] SerialFlash Packages!! 0x340000
[****] Starting task ff341390(0) PowerMgr
[EEPROM-DMA]! [0x340000] -> [0x40480000] (0xBD820 bytes)
[DMA1] Copy [0xF8F60000] -> [0x40561600], length [0x0001AEDC], flags [0x00030001]
[DMA1] OK
[EEPROM-DMA]! [0x340000] -> [0x40480000] (0x0 bytes)
[DMA1] Copy [0xF8060000] -> [0x40581700], length [0x00000D2C], flags [0x00030001]
[DMA1] OK
    12:    19.200 [PROPAD] SerialFlash Packages!! 0x7
    14:    19.200 [PROPAD] PROPAD_CreateFROMPropertyHandle DRAMAddr 0x4fe00000
    15:    19.456 [PROPAD] SerialFlash Packages!! 0x10000
[****] Starting task 22138(5a47cc) PropMgr
[EEPROM-DMA]! [0x10000] -> [0x4FE00000] (0x191570 bytes)
[MPU] Received: 06 04 02 00 00 00  (Init - spell #1)
[MPU] Sending : 50 4e 02 0e 02 02 01 01 00 00 00 60 00 00 00 19 64 00 00 00 00 21 00 00 06 04 00 00 06 04 00 00 06 04 00 00 00 00 00 00 65 28 00 00 00 00 00 00 00 00 00 00 00 00 80 48 78 48 00 03 03 01 00 00 00 00 02 01 00 00 00 01 00 00 00 00 03 00 01 00  (Mode group)
[****] Starting task ff0d0d68(0) DL
[****] Starting task 22138(5aee04) EventMgr
[****] Starting task ff0cb890(0) HotPlug
    17:    20.992 [STARTUP] InitializeIntercom
    18:    20.992 [STARTUP] InitializeIntercom End(0x0)
    28:    23.296 [DL] dlMain : Start
    31:    23.296 [DL] PROP_ACTIVE_SWEEP_MODE (1)
[MPU] Received: 0a 08 03 57 10 31 00 01 00 00  (unknown - PROP 8003005E)
[MPU] Sending : 24 23 02 0d 00 00 00 00 01 00 00 00 00 01 00 00 00 01 02 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 00  (Card group)
[MPU] Received: 08 06 00 00 02 0e 00 00  (Complete WaitID = 0x80000001 Mode group - spell #2)
[MPU] Sending : 28 27 02 0f 01 00 00 10 01 01 00 00 00 00 00 00 00 00 00 00 00 18 00 00 00 0c 00 00 00 00 00 00 00 02 00 00 00 01 01 00  (Movie group)
[MPU] Sending : 3c 3a 02 10 00 00 00 00 00 00 01 00 00 00 00 ff 00 00 ff 00 ff ff ff ff ff ff ff ff 00 00 00 00 00 01 ff 00 00 02 01 01 00 03 00 01 00 04 00 00 01 05 00 01 01 00 01 00 00 3f 00 00  (AF group)
[MPU] Sending : 3e 3c 02 11 01 ff 01 00 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 28 00 ff 00 00 ff 00 ff ff ff ff ff ff ff ff 00 00 00  (AF2 group)
[MPU] Sending : 0a 08 01 6e 80 48 00 00 00 00  (PROP_ISO_RANGE)
[MPU] Sending : 08 06 01 0b 00 00 00 00  (PROP_AEB)
[MPU] Sending : 06 05 01 76 00 00  (PROP_SILENT_CONTROL_SETTING)
[MPU] Sending : 06 05 01 71 00 00  (PROP_AF_METHOD_SELECT_FOCUS_AREA)
[MPU] Sending : 06 05 01 7e 00 00  (PROP_GPS_COMPAS_SELECT)
[MPU] Sending : 06 05 01 7c 00 00  (PROP_GPS_AUTO_TIME_SETTING)
[MPU] Sending : 0a 08 01 85 00 00 00 01 00 00  (PROP_GIS_SETTING)
[MPU] Sending : 08 06 01 47 0a 02 00 00  (PROP_SELFTIMER_CONTINUOUS_NUM)
[MPU] Sending : 06 05 01 7b 01 00  (PROP_CONTINUOUS_AF)
[MPU] Sending : 08 06 01 57 00 00 00 00  (PROP_BUILTIN_STROBO_MODE)
[MPU] Sending : 06 05 01 86 00 00  (PROP 8004004A)
[MPU] Sending : 06 05 01 87 00 00  (PROP 8004004B)
[MPU] Sending : 06 05 01 8d 00 00  (PROP 80040050)
[MPU] Sending : 06 05 01 8e 00 00  (PROP_GPSLOG_SETTING)
[MPU] Sending : 10 0e 01 8f 00 00 00 00 00 00 00 00 00 00 00 00  (PROP_LV_CFILTER)
[MPU] Sending : 06 05 01 90 00 00  (PROP_WIFI_SETTING)
[MPU] Sending : 06 05 01 8b 00 00  (PROP 8004004E)
[MPU] Sending : 08 06 01 91 00 00 00 00  (PROP_BUILTINGPS_PINPOINTING_INTERVAL_SETTING)
[MPU] Sending : 06 05 01 98 00 00  (PROP 80040056)
[MPU] Sending : 08 06 01 88 07 08 00 00  (PROP 8000004F)
[MPU] Sending : 06 05 03 37 00 00  (PROP_MIRROR_DOWN_IN_MOVIE_MODE)
[MPU] Sending : 06 05 01 92 07 00  (PROP_IMAGE_ASPECT_RATIO)
[MPU] Sending : 0e 0c 02 04 08 00 00 00 00 00 00 01 00 00  (PROP_CFN)
[MPU] Sending : 16 14 01 61 00 09 d1 3e 00 00 00 00 ff e7 ff ff 00 0a 26 fe 00 00  (PROP 80040027)
[MPU] Sending : 0a 08 03 2f 00 00 00 00 00 00  (PROP_SPECIAL_OPTION)
[MPU] Sending : 0a 08 03 2f 00 00 00 00 00 00  (PROP_SPECIAL_OPTION)
[MPU] Sending : 06 05 03 20 01 00  (PROP_STARTUP_CONDITION)
[MPU] Sending : 0c 0b 03 42 00 00 00 00 00 00 00 00  (PROP_LED_LIGHT)
[MPU] Sending : 62 61 02 12 01 20 50 00 f0 00 11 00 37 91 77 1a 00 00 ff 00 00 00 00 00 00 00 01 f8 96 00 00 00 00 00 00 01 f8 96 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 23 43 23 00 00 00 00 00 00 00 10 31 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  (Lens group)
[MPU] Sending : 06 05 03 05 02 00  (PROP_POWER_LEVEL)
[MPU] Sending : 06 05 04 06 05 00  (PROP_DEFAULT_LV_MANIP)
[MPU] Sending : 06 05 01 97 00 01  (PROP 8003006F)
[MPU] Sending : 06 05 04 06 05 00  (PROP_DEFAULT_LV_MANIP)
[MPU] Received: 08 06 00 00 01 97 00 00  (Complete WaitID = 0x8003006F PROP 8003006F - spell #3)
[MPU] Sending : 06 05 04 06 05 00  (PROP_DEFAULT_LV_MANIP)
[EEPROM-DMA]! [0x10000] -> [0x4FE00000] (0x0 bytes)
    67:    42.240 [PROPAD] SerialFlash Packages!! 0x7

Logged

dfort

  • Guest
Re: Canon EOS M
« Reply #1408 on: March 23, 2018, 06:44:03 PM »
Quote from: kiru on March 06, 2018, 05:02:57 AM
Can someone guide me on how to recreate shutterbug?

Your EF-M 18-55mm and that card that you're using should show the shutter-bug. It doesn't always show up right away. Shoot some stills, restart the camera, delete your CR2 files, restart the camera, change your ML configuration, change it back, restart the camera, eventually the filesystem will become fragmented and the shutter-bug will most likely show up. Format the card in camera and the shutter-bug might go away but it will most likely return with that lens/card combination.

More about the shutter-bug:

https://bitbucket.org/hudson/magic-lantern/issues?q=shutter-bug
https://www.magiclantern.fm/forum/index.php?topic=21728.0
Logged

a1ex

  • Administrator
  • Hero Member
  • *****
  • Posts: 12564
Re: Canon EOS M
« Reply #1409 on: March 23, 2018, 10:08:12 PM »
Quote from: a1ex on February 02, 2018, 07:55:25 PM
I still can't get to the GUI much less the ML menus on the EOSM in QEMU.

You no longer need the menu hack for emulating the EOS M's (I should probably remove it), but you do need to run with patches.gdb. Also disable raw features before getting into LiveView, as these are not emulated well. Then, press the L key 3 times, then keep the down arrow key pressed for ~ 1 second to open ML menu. That should do the trick.

Sample magic.cfg with raw histogram and fast zebras disabled:
Code: [Select]
hist.type = 1
zebra.colorspace = 0

To emulate the unified branch, which doesn't (yet) use a physical key for opening submenus, add this to patches.gdb:
Code: [Select]
# remap the PLAY button (P) to submenu key in ML
break *0xFF0CC6EC
commands
  silent
  set $r4 = -0xFFFE
  set $pc = 0xFF0CC6F0
  c
end

https://builds.magiclantern.fm/EOSM-202.html -> test results (with the above patches)

BTW - is that Focus menu really empty? nothing works from there?
Logged

dfort

  • Guest
Re: Canon EOS M
« Reply #1410 on: March 24, 2018, 12:25:43 AM »
This is what the EOSM focus menu looks like on the camera.





I still can't get into anything on QEMU with the EOSM but I'm seeing things I've never seen before on the EOSM2.

[EDIT] The important thing is if others can reproduce this issue in either QEMU or in camera.
Logged

a1ex

  • Administrator
  • Hero Member
  • *****
  • Posts: 12564
Re: Canon EOS M
« Reply #1411 on: March 24, 2018, 11:36:24 AM »
My log looks like this:

Code: [Select]
./run_canon_fw.sh EOSM,firmware=boot=0 -s -S &
arm-none-eabi-gdb -x EOSM/patches.gdb

DebugMsg=0x40D4 (from GDB script)
Lockdown read 0
Lockdown read 0
Lockdown read 1
Lockdown read 1
Lockdown read 2
Lockdown read 2
Lockdown read 3
Lockdown read 3
Lockdown read 4
Lockdown read 4
00000000 - 00000FFF: eos.tcm_code
40000000 - 40000FFF: eos.tcm_data
00001000 - 1FFFFFFF: eos.ram
40001000 - 5FFFFFFF: eos.ram_uncached
F0000000 - F0FFFFFF: eos.rom0
F1000000 - F1FFFFFF: eos.rom0_mirror
F2000000 - F2FFFFFF: eos.rom0_mirror
F3000000 - F3FFFFFF: eos.rom0_mirror
F4000000 - F4FFFFFF: eos.rom0_mirror
F5000000 - F5FFFFFF: eos.rom0_mirror
F6000000 - F6FFFFFF: eos.rom0_mirror
F7000000 - F7FFFFFF: eos.rom0_mirror
F8000000 - F8FFFFFF: eos.rom1
F9000000 - F9FFFFFF: eos.rom1_mirror
FA000000 - FAFFFFFF: eos.rom1_mirror
FB000000 - FBFFFFFF: eos.rom1_mirror
FC000000 - FCFFFFFF: eos.rom1_mirror
FD000000 - FDFFFFFF: eos.rom1_mirror
FE000000 - FEFFFFFF: eos.rom1_mirror
FF000000 - FFFFFFFF: eos.rom1_mirror
C0000000 - DFFFFFFF: eos.iomem
[EOS] loading './EOSM/ROM0.BIN' to 0xF0000000-0xF0FFFFFF
[EOS] loading './EOSM/ROM1.BIN' to 0xF8000000-0xF8FFFFFF
[EOS] loading './EOSM/SFDATA.BIN' as serial flash, size=0x800000
[MPU] warning: non-empty spell #30 (PROP 80030019) has duplicate(s): #34
[MPU] warning: non-empty spell #40 (PROP_VIDEO_MODE) has duplicate(s): #41

[MPU] Available keys:
- Arrow keys   : Navigation
- [ and ]      : Main dial (top scrollwheel)
- SPACE        : SET
- DELETE       : guess (press only)
- M            : MENU (press only)
- P            : PLAY (press only)
- I            : INFO/DISP (press only)
- Q            : guess
- L            : LiveView (press only)
- Shift        : Half-shutter
- 0/9          : Mode dial (press only)
- V            : Movie mode (press only)
- B            : Open battery door
- C            : Open card door
- F10          : Power down switch
- F1           : show this help

Setting BOOTDISK flag to 0
0xffff0000 in ?? ()
++macro define CURRENT_TASK   ((int)0xFFFFFFFF)
++macro define CURRENT_ISR    ((int)0xFFFFFFFF)
++macro define RTC_VALID_FLAG ((int)0xFFFFFFFF)
++macro define NUM_CORES      1
++macro define PRINT_CALLSTACK 0
++macro define MEM(x) (*(unsigned int*)(x))
++set pagination off
++set output-radix 16
++define hook-quit
++define KRED
++define KCYN
++define KBLU
++define KGRN
++define KYLW
++define KRESET
++macro define CURRENT_TASK_NAME (((int*)CURRENT_TASK)[0] ? ((char***)CURRENT_TASK)[0][9] : CURRENT_TASK)
++define print_callstack
++define print_current_location
++define print_current_location_with_callstack
++define print_formatted_string
++define DebugMsg_log
++define DebugMsg1_log
++define printf_log
++define task_create_log
++define task_switch_log
++define msleep_log
++define assert_log
++define assert0_log
++define create_semaphore_log
++define delete_semaphore_log
++define print_sem_name
++define take_semaphore_log
++define give_semaphore_log
++define create_msg_queue_log
++define print_mq_name
++define post_msg_queue_log
++define try_receive_msg_queue_log
++define receive_msg_queue_log
++define register_interrupt_log
++define register_func_log
++define mpu_decode
++define mpu_send_log
++define mpu_recv_log
++define mpu_analyze_recv_data_log
++define prop_lookup_maybe_log
++define mpu_prop_lookup_log
++define prop_print_data
++define prop_request_change_log
++define prop_deliver_log
++define try_expand_ram_struct
++define try_post_event_log
++define delayed_call_print_name
++define delayed_call_log
++define SetTimerAfter_log
++define SetHPTimerAfterNow_log
++define SetHPTimerNextTick_log
++define CancelTimer_log
++define engine_resource_description
++define engine_resources_list
++define CreateResLockEntry_log
++define LockEngineResources_log
++define AsyncLockEngineResources_log
++define UnLockEngineResources_log
++define StartEDmac_log
++define SetEDmac_log
++define print_date_time
++define set_date_time
++define load_default_date_time_log
++define rtc_read_log
++define rtc_write_log
++define CreateStateObject_log
++define state_transition_log
++define log_result
++define generic_log
++define generic_log_with_result
FFFF0800: MCR p15,0,Rd,cr9,cr1,0: XSCALE_LOCK_ICACHE_LINE <- 0x40000006 (40000000 - 40000FFF, 0x1000)
FFFF094C: MRC p15,0,Rd,cr1,cr0,0:      SCTLR -> 0x2078
FFFF094C: MCR p15,0,Rd,cr1,cr0,0:      SCTLR <- 0x12078   
FFFF4604: MCR p15,0,Rd,cr6,cr0,0:  946_PRBS0 <- 0x3F       (00000000 - FFFFFFFF, 0x100000000)
FFFF460C: MCR p15,0,Rd,cr6,cr1,0:  946_PRBS1 <- 0x3D       (00000000 - 7FFFFFFF, 0x80000000)
FFFF4614: MCR p15,0,Rd,cr6,cr2,0:  946_PRBS2 <- 0xE0000039 (E0000000 - FFFFFFFF, 0x20000000)
FFFF461C: MCR p15,0,Rd,cr6,cr3,0:  946_PRBS3 <- 0xC0000039 (C0000000 - DFFFFFFF, 0x20000000)
FFFF4624: MCR p15,0,Rd,cr6,cr4,0:  946_PRBS4 <- 0xFF00002F (FF000000 - FFFFFFFF, 0x1000000)
FFFF462C: MCR p15,0,Rd,cr6,cr5,0:  946_PRBS5 <- 0x37       (00000000 - 0FFFFFFF, 0x10000000)
FFFF4634: MCR p15,0,Rd,cr6,cr6,0:  946_PRBS6 <- 0xF700002F (F7000000 - F7FFFFFF, 0x1000000)
FFFF463C: MCR p15,0,Rd,cr2,cr0,0: DCACHE_CFG <- 0x70       
FFFF4644: MCR p15,0,Rd,cr3,cr0,0:       DACR <- 0x70       
FFFF4648: MCR p15,0,Rd,cr2,cr0,1: ICACHE_CFG <- 0x70       
FFFF464C: MCR p15,0,Rd,cr5,cr0,0:    DATA_AP <- 0x3FFF     
FFFF4654: MCR p15,0,Rd,cr5,cr0,1:    INSN_AP <- 0x3FFF     
FFFF4658: MRC p15,0,Rd,cr1,cr0,0:      SCTLR -> 0x12078
FFFF4658: MCR p15,0,Rd,cr1,cr0,0:      SCTLR <- 0xC001307D
FFFF095C: MCR p15,0,Rd,cr9,cr1,1: XSCALE_UNLOCK_ICACHE <- 0x6        (00000000 - 00000FFF, 0x1000)
FFFF095C: MRC p15,0,Rd,cr1,cr0,0:      SCTLR -> 0xC001307D
FFFF095C: MCR p15,0,Rd,cr1,cr0,0:      SCTLR <- 0xC005307D
FFFF098C: MRC p15,0,Rd,cr1,cr0,0:      SCTLR -> 0xC005307D
FFFF098C: MCR p15,0,Rd,cr1,cr0,0:      SCTLR <- 0xC005107D
MID=0xEC(fact_area=0xEC)
K331 READY
64K Sector FROM From BL 0xec
[SF] InstallSerialFlash 4 0xc022c0d4 0x0 0x800000 1

[SF] Bufcon Base 0xc022c0d4
SerialFlash Initialize
[DMA1] Copy [0xF8099000] -> [0x40540200], length [0x00000F84], flags [0x00030001]
[DMA1] OK
[DMA1] Copy [0xF8F00000] -> [0x40541400], length [0x0001132C], flags [0x00030001]
[DMA1] OK
[EEPROM-DMA]! [0x340000] -> [0x40480000] (0xBD820 bytes)
     0:    22.528 [STARTUP]
K331 ICU Firmware Version 2.0.2 ( 9.9.8 )
     6:    26.112 [PROPAD] SerialFlash Packages!! 0x340000
[DMA1] Copy [0xF8F60000] -> [0x40561600], length [0x0001AEDC], flags [0x00030001]
[DMA1] OK
[EEPROM-DMA]! [0x340000] -> [0x40480000] (0x0 bytes)
[DMA1] Copy [0xF8060000] -> [0x40581700], length [0x00003B24], flags [0x00030001]
[DMA1] OK
    10:    34.304 [PROPAD] SerialFlash Packages!! 0x7
    12:    34.560 [PROPAD] PROPAD_CreateFROMPropertyHandle DRAMAddr 0x4fe00000
    13:    35.072 [PROPAD] SerialFlash Packages!! 0x10000
[EEPROM-DMA]! [0x10000] -> [0x4FE00000] (0x191570 bytes)
[EEPROM-DMA]! [0x10000] -> [0x4FE00000] (0x0 bytes)
[MPU] Received: 06 04 02 00 00 00  (Init - spell #1)
[MPU] Sending : 50 4e 02 0e 02 02 01 01 00 00 00 60 00 00 00 19 64 00 00 00 00 21 00 00 06 04 00 00 06 04 00 00 06 04 00 00 00 00 00 00 65 28 00 00 00 00 00 00 00 00 00 00 00 00 80 48 78 48 00 03 03 01 00 00 00 00 02 01 00 00 00 01 00 00 00 00 03 00 01 00  (Mode group)
    15:    40.960 [STARTUP] InitializeIntercom
    16:    41.216 [STARTUP] InitializeIntercom End(0x0)
    17:    41.984 [PROPAD] SerialFlash Packages!! 0x7
    30:    48.640 [DL] dlMain : Start
    33:    48.896 [DL] PROP_ACTIVE_SWEEP_MODE (1)
[MPU] Received: 0a 08 03 57 10 33 00 01 00 00  (PROP 8003005E - spell #4)
[MPU] Sending : 24 23 02 0d 00 00 00 00 01 00 00 00 00 01 00 00 00 01 02 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 00  (Card group)
[MPU] Received: 08 06 01 1d 21 84 00 00  (unknown - PROP_PICTURE_STYLE)
[MPU] Received: 08 06 00 00 02 0e 00 00  (Complete WaitID = 0x80000001 Mode group - spell #2)
[MPU] Sending : 28 27 02 0f 01 00 00 10 01 01 00 00 00 00 00 00 00 00 00 00 00 18 00 00 00 0c 00 00 00 00 00 00 00 02 00 00 00 01 01 00  (Movie group)
[MPU] Sending : 3c 3a 02 10 00 00 00 00 00 00 01 00 00 00 00 ff 00 00 ff 00 ff ff ff ff ff ff ff ff 00 00 00 00 00 01 ff 00 00 02 01 01 00 03 00 01 00 04 00 00 01 05 00 01 01 00 01 00 00 3f 00 00  (AF group)
[MPU] Sending : 3e 3c 02 11 01 ff 01 00 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 28 00 ff 00 00 ff 00 ff ff ff ff ff ff ff ff 00 00 00  (AF2 group)
[MPU] Sending : 0a 08 01 6e 80 48 00 00 00 00  (PROP_ISO_RANGE)
[MPU] Sending : 08 06 01 0b 00 00 00 00  (PROP_AEB)
[MPU] Sending : 06 05 01 76 00 00  (PROP_SILENT_CONTROL_SETTING)
[MPU] Sending : 06 05 01 71 00 00  (PROP_AF_METHOD_SELECT_FOCUS_AREA)
[MPU] Sending : 06 05 01 7e 00 00  (PROP_GPS_COMPAS_SELECT)
[MPU] Sending : 06 05 01 7c 00 00  (PROP_GPS_AUTO_TIME_SETTING)
[MPU] Sending : 0a 08 01 85 00 00 00 01 00 00  (PROP_GIS_SETTING)
[MPU] Sending : 08 06 01 47 0a 02 00 00  (PROP_SELFTIMER_CONTINUOUS_NUM)
[MPU] Sending : 06 05 01 7b 01 00  (PROP_CONTINUOUS_AF)
[MPU] Sending : 08 06 01 57 00 00 00 00  (PROP_BUILTIN_STROBO_MODE)
[MPU] Sending : 06 05 01 86 00 00  (PROP 8004004A)
[MPU] Sending : 06 05 01 87 00 00  (PROP 8004004B)
[MPU] Sending : 06 05 01 8d 00 00  (PROP 80040050)
[MPU] Sending : 06 05 01 8e 00 00  (PROP_GPSLOG_SETTING)
[MPU] Sending : 10 0e 01 8f 00 00 00 00 00 00 00 00 00 00 00 00  (PROP_LV_CFILTER)
[MPU] Sending : 06 05 01 90 00 00  (PROP_WIFI_SETTING)
[MPU] Sending : 06 05 01 8b 00 00  (PROP 8004004E)
[MPU] Sending : 08 06 01 91 00 00 00 00  (PROP_BUILTINGPS_PINPOINTING_INTERVAL_SETTING)
[MPU] Sending : 06 05 01 98 00 00  (PROP 80040056)
[MPU] Sending : 08 06 01 88 07 08 00 00  (PROP 8000004F)
[MPU] Sending : 06 05 03 37 00 00  (PROP_MIRROR_DOWN_IN_MOVIE_MODE)
[MPU] Sending : 06 05 01 92 07 00  (PROP_IMAGE_ASPECT_RATIO)
[MPU] Sending : 0e 0c 02 04 08 00 00 00 00 00 00 01 00 00  (PROP_CFN)
[MPU] Sending : 0a 08 03 58 00 00 00 00 00 00  (PROP 8003005F)
[MPU] Sending : 06 05 03 5a 02 00  (PROP 80030060)
[MPU] Sending : 16 14 01 61 00 09 d1 3e 00 00 00 00 ff e7 ff ff 00 0a 26 fe 00 00  (PROP 80040027)
[MPU] Sending : 0a 08 03 2f 00 00 00 00 00 00  (PROP_SPECIAL_OPTION)
[MPU] Received: 0a 08 03 06 00 00 00 00 00 00  (PROP_AVAIL_SHOT - spell #5)
[MPU] Sending : 0a 08 03 2f 00 00 00 00 00 00  (PROP_SPECIAL_OPTION)
[MPU] Received: 06 04 03 10 00 00  (PROP 80030008 - spell #6)
[MPU] Sending : 06 05 03 20 01 00  (PROP_STARTUP_CONDITION)
[MPU] Received: 06 05 03 07 ff 00  (PROP_BURST_COUNT - spell #7)
[MPU] Sending : 0c 0b 03 42 00 00 00 00 00 00 00 00  (PROP_LED_LIGHT)
[MPU] Sending : 62 61 02 12 01 20 50 00 f0 00 11 00 37 91 77 1a 00 00 ff 00 00 00 00 00 00 00 01 f8 96 00 00 00 00 00 00 01 f8 96 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 23 43 23 00 00 00 00 00 00 00 10 31 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  (Lens group)
[MPU] Received: 06 05 01 2e 01 00  (PROP_SAVE_MODE - spell #8)
[MPU] Received: 0a 08 03 0b 00 00 00 00 00 00  (PROP 80030007 - spell #9)
[DMA5] Copy [0xFF892D90] -> [0x01E00000], length [0x00065BD4], flags [0x00000001]
[DMA5] OK
[MPU] Sending : 06 05 03 05 02 00  (PROP_POWER_LEVEL)
[MPU] Sending : 06 05 04 06 05 00  (PROP_DEFAULT_LV_MANIP)
[MPU] Sending : 06 05 01 97 00 01  (PROP 8003006F)
[MPU] Sending : 06 05 04 06 05 00  (PROP_DEFAULT_LV_MANIP)
[MPU] Sending : 06 05 01 2e 01 00  (PROP_SAVE_MODE)
[MPU] Sending : 06 05 04 06 05 00  (PROP_DEFAULT_LV_MANIP)
[MPU] Received: 08 06 00 00 01 97 00 00  (Complete WaitID = 0x8003006F PROP 8003006F - spell #3)
[MPU] Sending : 06 05 04 06 05 00  (PROP_DEFAULT_LV_MANIP)
[MPU] Received: 22 20 03 3b 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  (unnamed - spell #10)
[MPU] Received: 06 05 04 0e 01 00  (PROP 8002000D - spell #11)
   101:    43.520 [RSC] hMemoryQueue (0xA20012) hStorageQueue (0xA40014)
   102:    44.544 [RSC] ### LIST 5 0 5 ###
   167:    56.832 [SND] Seq LPC fin
   193:    58.368 [ENG] [ENGIO](Addr:0x41400000, Data:0x   44000)
   209:    72.704 [FM] FM_RegisterSpaceNotifyCallback
   213:    72.704 [AUDIO] [GPS] GPS_RegisterSpaceNotifyCallback
   217:    72.960 [FM] FM_RegisterSpaceNotifyCallback
   219:    72.960 [TERMINATE] SHUTDOWN init comp
   221:    72.960 [TERMINATE] Abort init comp
   253:    75.008 [MC] [MC] PROP_HEADPHONE_VOLUME_VALUE : 0
   254:    75.008 [MC] [MC] PROP_MOVIE_PLAY_VOLUME : 10
   259:    75.264 [MC] regist master CardCover
[MPU] Received: 08 07 01 2a 1b e6 00 00  (PROP_CARD2_FILE_NUMBER - spell #12)
[MPU] Received: 06 05 03 07 05 00  (PROP_BURST_COUNT - spell #13)
[MPU] Received: 0a 08 03 06 00 00 04 56 00 00  (unknown - PROP_AVAIL_SHOT)
[MPU] Received: 06 05 03 11 01 00  (PROP_ICU_AUTO_POWEROFF - spell #15)
[MPU] Received: 06 05 02 0a 00 00  (PROP_PERMIT_ICU_EVENT - spell #16)
[MPU] Sending : 06 05 01 2c 02 00  (PROP_CURRENT_MEDIA)
[MPU] Received: 06 05 03 0d 00 00  (PROP_CARD2_RECORD - spell #17)
[MPU] Sending : 12 10 03 00 b8 00 00 3a 07 00 00 00 00 00 00 00 00 00  (PROP 80030000)
[MPU] Received: 06 05 03 0c 00 00  (PROP_CARD1_RECORD - spell #18)
[MPU] Sending : 06 05 03 23 19 00  (unnamed)
[MPU] Sending : 06 05 03 04 00 00  (PROP_POWER_KIND)
[MPU] Sending : 1e 1d 03 24 45 46 2d 53 31 37 2d 35 35 6d 6d 20 66 2f 32 2e 38 20 49 53 20 55 53 4d 00 00  (PROP_LENS_NAME)
   303:    89.856 [PRP] M:B8 F:0 L:0 P:3A T:7
   304:    90.112 [STARTUP] update coded version.
[MPU] Received: 06 05 03 19 01 00  (PROP_TFT_STATUS - spell #19)
[MPU] Sending : 06 04 03 25 00 00  (unnamed)
[MPU] Sending : 24 23 03 15 01 20 50 00 f0 00 11 00 37 91 77 1a 00 00 ff 00 00 00 00 00 00 00 01 f8 96 00 00 00 00 21 00 00  (PROP_LENS)
[MPU] Sending : 24 22 03 3c 00 00 01 f8 96 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  (PROP 8003003C)
[MPU] Sending : 06 05 03 5d 8e 00  (PROP 80030062)
[MPU] Sending : 24 23 03 15 01 20 50 00 f0 00 11 00 37 91 77 1a 00 00 ff 00 00 00 00 00 00 00 01 f8 96 00 00 00 00 21 00 00  (PROP_LENS)
[MPU] Sending : 06 05 01 3d 00 00  (PROP_TEMP_STATUS)
[MPU] Sending : 06 05 03 37 00 00  (PROP_MIRROR_DOWN_IN_MOVIE_MODE)
[MPU] Sending : 06 05 04 06 05 00  (PROP_DEFAULT_LV_MANIP)
[MPU] Sending : 06 05 03 0d 00 00  (PROP_CARD2_RECORD)
[MPU] Sending : 06 05 03 0c 00 00  (PROP_CARD1_RECORD)
[MPU] Received: 06 05 09 11 01 00  (PROP_LV_DISPSIZE - spell #20)
[MPU] Received: 12 11 09 15 00 00 00 00 00 00 00 00 00 00 00 00 00 00  (PROP 80050020 - spell #21)
[MPU] Received: 14 13 09 25 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  (unnamed - spell #22)
[MPU] Received: 06 05 01 5a 00 00  (PROP_CONTINUOUS_AF_VALID - spell #23)
[MPU] Received: 06 05 09 2f 01 00  (unnamed - spell #24)
[MPU] Sending : 06 05 01 59 01 00  (PROP_MOVIE_SERVO_AF)
[MPU] Received: 14 13 09 25 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  (unnamed - spell #25)
[MPU] Received: 06 05 01 5a 01 00  (PROP_CONTINUOUS_AF_VALID - spell #26)
[MPU] Sending : 06 05 01 59 01 00  (PROP_MOVIE_SERVO_AF)
[MPU] Received: 0a 08 09 1a 00 00 00 00 00 00  (PROP 8005002A - spell #27)
[MPU] Received: 0a 08 09 24 00 00 00 00 00 00  (unnamed - spell #28)
[MPU] Received: 08 06 03 18 00 00 00 00  (PROP 8003000F - spell #29)
[MPU] Received: 08 06 03 1f 00 00 00 00  (PROP 80030019 - spell #30)
[MPU] Sending : 06 05 01 58 00 00  (PROP_VIDEOSNAP_MODE)
[MPU] Received: 06 05 03 13 00 00  (PROP_LOGICAL_CONNECT - spell #31)
[MPU] Received: 06 05 03 1e 00 00  (PROP 8003001A - spell #32)
[MPU] Received: 06 05 01 8a 00 00  (PROP_SW2_MOVIE_START - spell #33)
[MPU] Received: 08 06 03 1f 00 00 00 00  (PROP 80030019 - spell #34)
[MPU] Sending : 06 05 01 8a 00 00  (PROP_SW2_MOVIE_START)
[MPU] Received: 0a 08 01 3b ff ff 00 00 00 00  (PROP_USBDEVICE_CONNECT - spell #35)
[MPU] Received: 0a 08 01 3b ff 00 00 00 00 00  (PROP_USBDEVICE_CONNECT - spell #36)
[MPU] Sending : 06 05 03 38 8f 00  (PROP 80030035)
   348:   131.328 [MR] mvrChangeAckCBR : Video - Mode=0, Type=0, Rate=24, GOP=12
   391:   139.264 [LVDTS] WARN First Get DTS_GetAllRandomData
   392:   139.520 [LVDTS] WARN First Get DTS_GetAllRandomData
   400:   140.800 SPECIAL_OPTION AF MOVIE GERO OFF
   406:   141.312 [LVDTS] WARN First Get DTS_GetAllRandomData
   407:   141.312 [LVDTS] WARN First Get DTS_GetAllRandomData
   408:   141.312 [LVDTS] WARN First Get DTS_GetAllRandomData
   411:   141.312 [LVDTS] WARN First Get DTS_GetAllRandomData
   412:   141.312 [LVDTS] WARN First Get DTS_GetAllRandomData
   414:   141.312 [LVDTS] WARN First Get DTS_GetAllRandomData
   415:   141.312 [LVDTS] WARN First Get DTS_GetAllRandomData
   420:   141.568 [LVDTS] WARN First Get DTS_GetAllRandomData
   421:   141.568 [LVDTS] WARN First Get DTS_GetAllRandomData
   422:   141.568 [LVDTS] WARN First Get DTS_GetAllRandomData
   423:   141.824 [LVGMT]  PROP_LV_PROHIBIT_OUTPUT 0 0
   424:   141.824 [LVDTS] WARN First Get DTS_GetAllRandomData
   426:   141.824 [LVGMT]  PROP_LV_CFILTER[0][0] 
   427:   141.824 [LVGMT]  PROP_LV_CENTER_OF_DIORAM_CFILTER[2684][1793]
   431:   142.336 [LVDTS] WARN First Get DTS_GetAllRandomData
   432:   142.592 [LVDTS] WARN First Get DTS_GetAllRandomData
   441:   144.384 [LVCOM] InitializeLiveViewDefectDetection
   442:   144.896 [LVCOM] ExecuteDefectMarge Start
   443:   144.896 [LVCOM] ExecuteDefectMarge End
   448:    80.128 [LVDTS] WARN First Get DTS_GetAllRandomData
   449:    80.128 [LVDTS] WARN First Get DTS_GetAllRandomData
   462:   150.272 [AF] Ratio:30 Reboot:2 !!!
   464:   150.528 [LV]  PROP_LV_BLOCK  PROP_LV_UNBLOCKING 0
   475:   153.344 [AUDIO] RegisterCBRSDIOCableConnect
   503:   156.928 [WFT] PROP_ADAPTER_DEVICE_ACTIVE: Can Not Change(0) Connect(0)
   541:   161.280 [PTP] PSI UnlockTransImg : Trans List is NULL
   542:   161.280 [PTP] PSI TarminateTransImgList : SessionTarget [1]
   543:   161.280 [PTP] PSI TarminateTransImgList : Trans List is NULL
   546:   161.536 [PTP] PSI UnlockTransImg : Trans List is NULL
   547:   161.536 [PTP] PSI TarminateTransImgList : SessionTarget [10]
   548:   161.536 [PTP] PSI TarminateTransImgList : Trans List is NULL
   550:   161.536 [PTP] PSI DisconnectViewFinder
   557:   162.048 [PTP] PROP_SCREEN_SAVER 0
   560:   162.304 [PTPCOM] SetPtpTransportResources:0,323d
   562:   162.560 [PTP] PSI UnlockTransImg : Trans List is NULL
   563:   162.816 [PTP] PSI TarminateTransImgList : SessionTarget [10]
   564:   162.816 [PTP] PSI TarminateTransImgList : Trans List is NULL
   594:   100.352 [WFT] Regist PropCBR PROP_WFT_BLUETOOTH
SD: Unknown CMD1
[SDIO] Error
SD: Unknown CMD1
[SDIO] Error
SD: Unknown CMD1
[SDIO] Error
   627:   131.072 [SD] ERROR SDINTREP=0x00000000
   628:   131.328 [SD] ERROR UNEXPECTED ERROR
[MPU] Received: 0a 08 03 06 00 00 00 0b 00 00  (unknown - PROP_AVAIL_SHOT)
   655:   240.640 [FM] FileNo (DriveNo = 2, 0 <-> 7142)
   656:   240.640 [FM] FreeCluster (DriveNo = 2, 11628 <-> 932093)
[MPU] Received: 08 07 01 2a 1b e6 00 00  (PROP_CARD2_FILE_NUMBER - spell #37)
[MPU] Received: 08 07 01 2a 1b e6 00 00  (PROP_CARD2_FILE_NUMBER - spell #37)
[MPU] Received: 06 05 03 19 01 00  (PROP_TFT_STATUS - spell #39)
[MPU] Received: 1e 1c 01 4e 00 00 00 00 00 00 00 00 00 00 00 18 00 00 00 0c 00 00 00 00 00 00 00 02 00 00  (PROP_VIDEO_MODE - spell #40)
[MPU] Sending : 1e 1c 01 4e 00 00 00 00 00 00 00 00 00 00 00 18 00 00 00 0c 00 00 00 00 00 00 00 02 00 00  (PROP_VIDEO_MODE)
[MPU] Received: 1e 1c 01 4e 00 00 00 00 00 00 00 00 00 00 00 18 00 00 00 0c 00 00 00 00 00 00 00 02 00 00  (PROP_VIDEO_MODE - spell #40)
[MPU] Sending : 06 05 01 53 01 00  (PROP_AF_DURING_RECORD)
[MPU] Received: 06 05 03 19 01 00  (PROP_TFT_STATUS - spell #42)
[MPU] Sending : 06 05 01 58 00 00  (PROP_VIDEOSNAP_MODE)
[MPU] Received: 06 05 03 19 01 00  (PROP_TFT_STATUS - spell #42)
[MPU] Sending : 06 05 01 59 01 00  (PROP_MOVIE_SERVO_AF)
[MPU] Received: 06 05 02 0a 01 00  (PROP_PERMIT_ICU_EVENT - spell #44)
[MPU] Sending : 06 05 01 49 01 00  (PROP_LIVE_VIEW_AF_SYSTEM)
[MPU] Received: 06 05 03 19 01 00  (PROP_TFT_STATUS - spell #45)
[MPU] Sending : 1e 1c 01 4e 00 00 00 00 00 00 00 00 00 00 00 18 00 00 00 0c 00 00 00 00 00 00 00 02 00 00  (PROP_VIDEO_MODE)
[MPU] Received: 06 05 04 00 00 00  (NotifyGUIEvent - spell #46)
   696:   250.112 [FM] [GPS] GPS_Initialize (36, 25)
   772:   190.976 [DP] LOGICAL_CONNECT [0x00000000]
   774:   190.976 [PROPAD] ERROR GetPropertyData ID (0) = 0x02050038
   775:   190.976 [PRP] ERROR NOT FOUND PROPERTY ID = 0x02050038 L:2411
   776:   190.976 [DP] PROP_WIFI_SETTING [0]
   796:   259.840 WARN localI2C_Read : 377
   797:   260.352 WARN localI2C_Read : 377
   798:   260.608 WARN localI2C_Read : 377
   799:   260.864 WARN localI2C_Read : 377
   800:   261.120 WARN localI2C_Read : 377
   801:   261.120 WARN localI2C_Read : 377
   802:   261.376 [HDMI] cec_initialize_reg_set : END
   803:   261.376 WARN localI2C_Read : 377
   804:   261.632 WARN localI2C_Read : 377
   805:   261.888 WARN localI2C_Read : 377
   806:   261.888 [HDMI] Logical Address Set : End
   807:   261.888 [HDMI] CEC DEVICE SETUP
   808:   261.888 [HDMI] InitializeHDMI
   815:   268.032 [IMPP] H264E InitializeH264EncodeFor1080pDZoom
   816:   268.032 [IMPP] H264E InitializeH264EncodeFor1080p25fpsDZoom
  1051:   288.768 [MR_MOV] (Empty Func) MVW_RegisterXmpDataCallback
  1065:   289.280 [HDMI] CEC OFF
  1083:   290.560 [STARTUP] startupInitializeComplete
  1086:   290.560 [MC] guimode comp. 0
  1101:   291.072 [MC] guimode comp. 0
  1148:   295.168 [MR] mvrChangeAckCBR : Video - Mode=0, Type=0, Rate=24, GOP=12
  1157:   231.936 [LVDTS] WARN First Get DTS_GetAllRandomData
  1158:   231.936 [LVDTS] WARN First Get DTS_GetAllRandomData
[MPU] Received: 08 06 04 0c 03 00 00 00  (PROP_SHOOTING_TYPE - spell #53)
[MPU] Received: 06 05 03 1d 1f 00  (unknown - PROP_BATTERY_REPORT)
  1176:[MPU] Sending : 06 05 01 53 01 00  (PROP_AF_DURING_RECORD)
[MPU] Received: 06 05 08 06 ff 00  (unknown - COM_FA_CHECK_FROM)
   244.480 [MR] mvrChangeAckCBR : Video - Mode=0, Type=0, Rate=24, GOP=12
[MPU] Sending : 06 05 01 58 00 00  (PROP_VIDEOSNAP_MODE)
[MPU] Sending : 06 05 01 59 01 00  (PROP_MOVIE_SERVO_AF)
  1183:   247.2[MPU] Sending : 06 05 01 49 01 00  (PROP_LIVE_VIEW_AF_SYSTEM)
96 [LVDTS] WARN First Get DTS_GetAllRandomData
  1184:   247.296 [LVDTS] WARN First Get DTS_GetAllRandomData
[MPU] Sending : 06 05 06 11 01 00  (GUI_SWITCH)
[MPU] Sending : 06 05 06 12 00 00  (GUI_SWITCH)
[MPU] Sending : 46 45 0a 08 ff 1f 01 00 00 00 00 00 00 00 01 03 50 20 28 01 01 00 60 04 01 04 87 00 00 00 00 00 00 01 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  (PD_NotifyOlcInfoChanged)
[MPU] Sending : 08 06 01 04 00 00 00 00  (PROP_AF_MODE)
[MPU] Sending : 06 05 03 37 00 00  (PROP_MIRROR_DOWN_IN_MOVIE_MODE)
[MPU] Sending : 06 05 04 00 00 01  (NotifyGUIEvent)
[MPU] Sending : 08 06 04 0c 03 00 01 00  (PROP_SHOOTING_TYPE)
  1230:   261.888 [MC] guimode comp. 0
[MPU] Received: 08 06 00 00 04 00 00 00  (Complete WaitID = 0x80020000 - spell #47)
[MPU] Received: 06 05 03 19 01 00  (PROP_TFT_STATUS - spell #56)
[MPU] Received: 06 04 04 13 00 00  (unknown - PROP 80020012)
[DMA5] Copy [0xFFA14DDC] -> [0xD0288000], length [0x00006E74], flags [0x00000001]
[DMA5] OK
[DMA5] Copy [0xFFA1BC50] -> [0xD0280000], length [0x000001C0], flags [0x00000001]
[DMA5] OK
[DMA5] Copy [0xFFA1BE10] -> [0x01E80000], length [0x00001A28], flags [0x00000001]
[DMA5] OK
[MPU] Received: 08 06 00 00 04 0c 00 00  (unknown - Complete WaitID)
[MPU] Received: 14 13 09 25 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  (unnamed - spell #25)
[MPU] Received: 06 05 03 19 01 00  (PROP_TFT_STATUS - spell #39)
[MPU] Received: 06 04 09 00 00 00  (unknown - PROP_LV_LENS)
[MPU] Received: 06 05 09 0b 02 00  (unknown - PROP_LV_AF_RESULT)
[MPU] Received: 0a 08 09 24 ff ff 00 00 00 00  (unknown - unnamed)
[MPU] Received: 06 05 0e 00 01 00  (unknown - unnamed)
  1271:   265.984 [RSC] ###!! Lv or MovieRec (X 48000064)18:0
  1272:   265.984 [RSC] ###!! Lv or MovieRec (46000064)
  1279:   267.264 [LVDTS] WARN First Get DTS_GetAllRandomData
  1280:   267.264 [LVDTS] WARN First Get DTS_GetAllRandomData
  1281:   267.520 [LVDTS] WARN First Get DTS_GetAllRandomData
  1286:   267.776 [LVDTS] WARN First Get DTS_GetAllRandomData
  1287:   267.776 [LVDTS] WARN First Get DTS_GetAllRandomData
  1288:   267.776 [LVDTS] WARN First Get DTS_GetAllRandomData
  1292:   267.776 [LVDTS] WARN First Get DTS_GetAllRandomData
  1293:   267.776 [LVDTS] WARN First Get DTS_GetAllRandomData
  1294:   267.776 [LVDTS] WARN First Get DTS_GetAllRandomData
  1306:   269.312 [LVDTS] WARN First Get DTS_GetAllRandomData
  1307:   269.312 [LVDTS] WARN First Get DTS_GetAllRandomData
  1308:   269.312 [LVDTS] WARN First Get DTS_GetAllRandomData
  1312:   269.824 [LVDTS] WARN First Get DTS_GetAllRandomData
  1325:   270.592 [LVDTS] WARN First Get DTS_GetAllRandomData
  1326:   270.848 [LVDTS] WARN First Get DTS_GetAllRandomData
  1328:   271.104 [LVDTS] WARN First Get DTS_GetAllRandomData
  1329:   271.360 [LVDTS] WARN First Get DTS_GetAllRandomData
  1331:   271.616 [LVDTS] WARN First Get DTS_GetAllRandomData
  1333:   271.872 [LVICV] LVICV_SetResource Rsc:0 Img:0
  1428:   350.720 [TCH]ERROR  TouchPanelIC Ack Error
Key event: 32 -> 0001
[MPU] Sending : 06 05 06 00 01 00  (GUI_SWITCH)
[MPU] Received: 06 05 04 00 01 00  (NotifyGUIEvent - spell #46)
[MPU] Sending : 06 05 04 00 01 01  (NotifyGUIEvent)
[MPU] Received: 08 06 00 00 04 00 00 00  (Complete WaitID = 0x80020000 - spell #47)
  1468:  1335.552 [MC] guimode comp. 1
  1477:  1336.832 [LVDTS] WARN First Get DTS_GetAllRandomData
  1482:  1337.856 [LVDTS] WARN First Get DTS_GetAllRandomData
  1483:  1338.112 [LVEVF] ERROR [VRAM]VRAM_SDV_SetSenserDriveParameter FrameData==NULL)
  1489:  1340.928 [LVICV] LVICV_ReleaseResource
  1490:  1340.928 [LVCOM] ERROR [ADST] ADST_ReleaseMemAddrArray(16):Failed
  1495:  1341.440 [LVDTS] WARN First Get DTS_GetAllRandomData
  1575:  1368.320 [DISP] MuteONImage (1470)
  1580:  1368.576 [PTP] PSI DisconnectViewFinder
  1583:  1471.744 [LVDTS] WARN First Get DTS_GetAllRandomData
[MPU] Received: 06 05 03 19 00 00  (unknown - PROP_TFT_STATUS)

or, with lua_fix and CONFIG_QEMU=y (keys pressed: L L L, followed by down arrow pressed for 1 second):
Code: [Select]
./run_canon_fw.sh EOSM,firmware=boot=1 -s -S &
arm-none-eabi-gdb -x EOSM/patches.gdb -ex quit

DebugMsg=0x40D4 (from GDB script)
Lockdown read 0
Lockdown read 0
Lockdown read 1
Lockdown read 1
Lockdown read 2
Lockdown read 2
Lockdown read 3
Lockdown read 3
Lockdown read 4
Lockdown read 4
00000000 - 00000FFF: eos.tcm_code
40000000 - 40000FFF: eos.tcm_data
00001000 - 1FFFFFFF: eos.ram
40001000 - 5FFFFFFF: eos.ram_uncached
F0000000 - F0FFFFFF: eos.rom0
F1000000 - F1FFFFFF: eos.rom0_mirror
F2000000 - F2FFFFFF: eos.rom0_mirror
F3000000 - F3FFFFFF: eos.rom0_mirror
F4000000 - F4FFFFFF: eos.rom0_mirror
F5000000 - F5FFFFFF: eos.rom0_mirror
F6000000 - F6FFFFFF: eos.rom0_mirror
F7000000 - F7FFFFFF: eos.rom0_mirror
F8000000 - F8FFFFFF: eos.rom1
F9000000 - F9FFFFFF: eos.rom1_mirror
FA000000 - FAFFFFFF: eos.rom1_mirror
FB000000 - FBFFFFFF: eos.rom1_mirror
FC000000 - FCFFFFFF: eos.rom1_mirror
FD000000 - FDFFFFFF: eos.rom1_mirror
FE000000 - FEFFFFFF: eos.rom1_mirror
FF000000 - FFFFFFFF: eos.rom1_mirror
C0000000 - DFFFFFFF: eos.iomem
[EOS] loading './EOSM/ROM0.BIN' to 0xF0000000-0xF0FFFFFF
[EOS] loading './EOSM/ROM1.BIN' to 0xF8000000-0xF8FFFFFF
[EOS] loading './EOSM/SFDATA.BIN' as serial flash, size=0x800000
[MPU] warning: non-empty spell #30 (PROP 80030019) has duplicate(s): #34
[MPU] warning: non-empty spell #40 (PROP_VIDEO_MODE) has duplicate(s): #41

[MPU] Available keys:
- Arrow keys   : Navigation
- [ and ]      : Main dial (top scrollwheel)
- SPACE        : SET
- DELETE       : guess (press only)
- M            : MENU (press only)
- P            : PLAY (press only)
- I            : INFO/DISP (press only)
- Q            : guess
- L            : LiveView (press only)
- Shift        : Half-shutter
- 0/9          : Mode dial (press only)
- V            : Movie mode (press only)
- B            : Open battery door
- C            : Open card door
- F10          : Power down switch
- F1           : show this help

Setting BOOTDISK flag to FFFFFFFF
0xffff0000 in ?? ()
++macro define CURRENT_TASK   ((int)0xFFFFFFFF)
++macro define CURRENT_ISR    ((int)0xFFFFFFFF)
++macro define RTC_VALID_FLAG ((int)0xFFFFFFFF)
++macro define NUM_CORES      1
++macro define PRINT_CALLSTACK 0
++macro define MEM(x) (*(unsigned int*)(x))
++set pagination off
++set output-radix 16
++define hook-quit
++define KRED
++define KCYN
++define KBLU
++define KGRN
++define KYLW
++define KRESET
++macro define CURRENT_TASK_NAME (((int*)CURRENT_TASK)[0] ? ((char***)CURRENT_TASK)[0][9] : CURRENT_TASK)
++define print_callstack
++define print_current_location
++define print_current_location_with_callstack
++define print_formatted_string
++define DebugMsg_log
++define DebugMsg1_log
++define printf_log
++define task_create_log
++define task_switch_log
++define msleep_log
++define assert_log
++define assert0_log
++define create_semaphore_log
++define delete_semaphore_log
++define print_sem_name
++define take_semaphore_log
++define give_semaphore_log
++define create_msg_queue_log
++define print_mq_name
++define post_msg_queue_log
++define try_receive_msg_queue_log
++define receive_msg_queue_log
++define register_interrupt_log
++define register_func_log
++define mpu_decode
++define mpu_send_log
++define mpu_recv_log
++define mpu_analyze_recv_data_log
++define prop_lookup_maybe_log
++define mpu_prop_lookup_log
++define prop_print_data
++define prop_request_change_log
++define prop_deliver_log
++define try_expand_ram_struct
++define try_post_event_log
++define delayed_call_print_name
++define delayed_call_log
++define SetTimerAfter_log
++define SetHPTimerAfterNow_log
++define SetHPTimerNextTick_log
++define CancelTimer_log
++define engine_resource_description
++define engine_resources_list
++define CreateResLockEntry_log
++define LockEngineResources_log
++define AsyncLockEngineResources_log
++define UnLockEngineResources_log
++define StartEDmac_log
++define SetEDmac_log
++define print_date_time
++define set_date_time
++define load_default_date_time_log
++define rtc_read_log
++define rtc_write_log
++define CreateStateObject_log
++define state_transition_log
++define log_result
++define generic_log
++define generic_log_with_result
FFFF0800: MCR p15,0,Rd,cr9,cr1,0: XSCALE_LOCK_ICACHE_LINE <- 0x40000006 (40000000 - 40000FFF, 0x1000)
FFFF094C: MRC p15,0,Rd,cr1,cr0,0:      SCTLR -> 0x2078
FFFF094C: MCR p15,0,Rd,cr1,cr0,0:      SCTLR <- 0x12078   
FFFF4604: MCR p15,0,Rd,cr6,cr0,0:  946_PRBS0 <- 0x3F       (00000000 - FFFFFFFF, 0x100000000)
FFFF460C: MCR p15,0,Rd,cr6,cr1,0:  946_PRBS1 <- 0x3D       (00000000 - 7FFFFFFF, 0x80000000)
FFFF4614: MCR p15,0,Rd,cr6,cr2,0:  946_PRBS2 <- 0xE0000039 (E0000000 - FFFFFFFF, 0x20000000)
FFFF461C: MCR p15,0,Rd,cr6,cr3,0:  946_PRBS3 <- 0xC0000039 (C0000000 - DFFFFFFF, 0x20000000)
FFFF4624: MCR p15,0,Rd,cr6,cr4,0:  946_PRBS4 <- 0xFF00002F (FF000000 - FFFFFFFF, 0x1000000)
FFFF462C: MCR p15,0,Rd,cr6,cr5,0:  946_PRBS5 <- 0x37       (00000000 - 0FFFFFFF, 0x10000000)
FFFF4634: MCR p15,0,Rd,cr6,cr6,0:  946_PRBS6 <- 0xF700002F (F7000000 - F7FFFFFF, 0x1000000)
FFFF463C: MCR p15,0,Rd,cr2,cr0,0: DCACHE_CFG <- 0x70       
FFFF4644: MCR p15,0,Rd,cr3,cr0,0:       DACR <- 0x70       
FFFF4648: MCR p15,0,Rd,cr2,cr0,1: ICACHE_CFG <- 0x70       
FFFF464C: MCR p15,0,Rd,cr5,cr0,0:    DATA_AP <- 0x3FFF     
FFFF4654: MCR p15,0,Rd,cr5,cr0,1:    INSN_AP <- 0x3FFF     
FFFF4658: MRC p15,0,Rd,cr1,cr0,0:      SCTLR -> 0x12078
FFFF4658: MCR p15,0,Rd,cr1,cr0,0:      SCTLR <- 0xC001307D
FFFF095C: MCR p15,0,Rd,cr9,cr1,1: XSCALE_UNLOCK_ICACHE <- 0x6        (00000000 - 00000FFF, 0x1000)
FFFF095C: MRC p15,0,Rd,cr1,cr0,0:      SCTLR -> 0xC001307D
FFFF095C: MCR p15,0,Rd,cr1,cr0,0:      SCTLR <- 0xC005307D
FFFF098C: MRC p15,0,Rd,cr1,cr0,0:      SCTLR -> 0xC005307D
FFFF098C: MCR p15,0,Rd,cr1,cr0,0:      SCTLR <- 0xC005107D
MID=0xEC(fact_area=0xEC)
SD: CMD12 in a wrong state
[SDIO] Error
SD: CMD12 in a wrong state
[SDIO] Error
SD LOAD OK.
Open file for read : AUTOEXEC.BIN
SD: CMD12 in a wrong state
[SDIO] Error
SD: CMD12 in a wrong state
[SDIO] Error
File size : 0x6BE60
Now jump to AUTOEXEC.BIN!!
0010E408: MRC p15,0,Rd,cr1,cr0,0:      SCTLR -> 0xC005107D
0010E408: MCR p15,0,Rd,cr1,cr0,0:      SCTLR <- 0xC005107D
[boot] copy_and_restart 0x9e1e0 (647648)
[BOOT] changing user_mem_start from 0x9e1c8 (647624) to 0x11d240 (1167936)
[BOOT] changing init_task from 0xff0c5484 (-15969148) to 0x9e67c (648828)
[BOOT] installing task dispatch hook at 0x3dd60 (253280)
[****] Starting task 9e67c(0) init
[BOOT] expecting armlib to overwrite E5CC8: FBE3A (task id 20002)
[BOOT] autoexec.bin loaded at 9E1E0 - 11D240.
[BOOT] reserved 520288 bytes for ML (used 520288)
K331 READY
64K Sector FROM From BL 0xec
[SF] InstallSerialFlash 4 0xc022c0d4 0x0 0x800000 1

[SF] Bufcon Base 0xc022c0d4
SerialFlash Initialize
[BOOT] E5CC8 now contains 0, restoring FBE3A.
[****] Starting task ff0f34a4(47e82c) Startup
[****] Starting task ff0c357c(0) Startup2
[DMA1] Copy [0xF8099000] -> [0x40540200], length [0x00000F84], flags [0x00030001]
[DMA1] OK
[DMA1] Copy [0xF8F00000] -> [0x40541400], length [0x0001132C], flags [0x00030001]
[DMA1] OK
[****] Starting task ff0c28c8(0) TaskMain
[****] Starting task 22138(47e530) DbgMgr
[EEPROM-DMA]! [0x340000] -> [0x40480000] (0xBD820 bytes)
     0:    41.728 [STARTUP]
K331 ICU Firmware Version 2.0.2 ( 9.9.8 )
     8:    45.312 [PROPAD] SerialFlash Packages!! 0x340000
[****] Starting task ff341390(0) PowerMgr
[DMA1] Copy [0xF8F60000] -> [0x40561600], length [0x0001AEDC], flags [0x00030001]
[DMA1] OK
[EEPROM-DMA]! [0x340000] -> [0x40480000] (0x0 bytes)
[DMA1] Copy [0xF8060000] -> [0x40581700], length [0x00003B24], flags [0x00030001]
[DMA1] OK
    13:    53.760 [PROPAD] SerialFlash Packages!! 0x7
    15:    53.760 [PROPAD] PROPAD_CreateFROMPropertyHandle DRAMAddr 0x4fe00000
    16:    54.528 [PROPAD] SerialFlash Packages!! 0x10000
[EEPROM-DMA]! [0x10000] -> [0x4FE00000] (0x191570 bytes)
[EEPROM-DMA]! [0x10000] -> [0x4FE00000] (0x0 bytes)
    18:    60.928 [PROPAD] SerialFlash Packages!! 0x7
[****] Starting task 22138(5a4750) PropMgr
[MPU] Received: 06 04 02 00 00 00  (Init - spell #1)
[MPU] Sending : 50 4e 02 0e 02 02 01 01 00 00 00 60 00 00 00 19 64 00 00 00 00 21 00 00 06 04 00 00 06 04 00 00 06 04 00 00 00 00 00 00 65 28 00 00 00 00 00 00 00 00 00 00 00 00 80 48 78 48 00 03 03 01 00 00 00 00 02 01 00 00 00 01 00 00 00 00 03 00 01 00  (Mode group)
[****] Starting task ff0d0d68(0) DL
[****] Starting task 22138(5aed88) EventMgr
[****] Starting task ff0cb890(0) HotPlug
    22:    62.720 [STARTUP] InitializeIntercom
    23:    62.976 [STARTUP] InitializeIntercom End(0x0)
    33:    69.632 [DL] dlMain : Start
    36:    70.144 [DL] PROP_ACTIVE_SWEEP_MODE (1)
[MPU] Received: 0a 08 03 57 10 33 00 01 00 00  (PROP 8003005E - spell #4)
[MPU] Sending : 24 23 02 0d 00 00 00 00 01 00 00 00 00 01 00 00 00 01 02 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 00  (Card group)
[MPU] Received: 08 06 01 1d 21 84 00 00  (unknown - PROP_PICTURE_STYLE)
[MPU] Received: 08 06 00 00 02 0e 00 00  (Complete WaitID = 0x80000001 Mode group - spell #2)
[MPU] Sending : 28 27 02 0f 01 00 00 10 01 01 00 00 00 00 00 00 00 00 00 00 00 18 00 00 00 0c 00 00 00 00 00 00 00 02 00 00 00 01 01 00  (Movie group)
[MPU] Sending : 3c 3a 02 10 00 00 00 00 00 00 01 00 00 00 00 ff 00 00 ff 00 ff ff ff ff ff ff ff ff 00 00 00 00 00 01 ff 00 00 02 01 01 00 03 00 01 00 04 00 00 01 05 00 01 01 00 01 00 00 3f 00 00  (AF group)
[MPU] Sending : 3e 3c 02 11 01 ff 01 00 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 28 00 ff 00 00 ff 00 ff ff ff ff ff ff ff ff 00 00 00  (AF2 group)
[MPU] Sending : 0a 08 01 6e 80 48 00 00 00 00  (PROP_ISO_RANGE)
[MPU] Sending : 08 06 01 0b 00 00 00 00  (PROP_AEB)
[MPU] Sending : 06 05 01 76 00 00  (PROP_SILENT_CONTROL_SETTING)
[MPU] Sending : 06 05 01 71 00 00  (PROP_AF_METHOD_SELECT_FOCUS_AREA)
[MPU] Sending : 06 05 01 7e 00 00  (PROP_GPS_COMPAS_SELECT)
[MPU] Sending : 06 05 01 7c 00 00  (PROP_GPS_AUTO_TIME_SETTING)
[MPU] Sending : 0a 08 01 85 00 00 00 01 00 00  (PROP_GIS_SETTING)
[MPU] Sending : 08 06 01 47 0a 02 00 00  (PROP_SELFTIMER_CONTINUOUS_NUM)
[MPU] Sending : 06 05 01 7b 01 00  (PROP_CONTINUOUS_AF)
[MPU] Sending : 08 06 01 57 00 00 00 00  (PROP_BUILTIN_STROBO_MODE)
[MPU] Sending : 06 05 01 86 00 00  (PROP 8004004A)
[MPU] Sending : 06 05 01 87 00 00  (PROP 8004004B)
[MPU] Sending : 06 05 01 8d 00 00  (PROP 80040050)
[MPU] Sending : 06 05 01 8e 00 00  (PROP_GPSLOG_SETTING)
[MPU] Sending : 10 0e 01 8f 00 00 00 00 00 00 00 00 00 00 00 00  (PROP_LV_CFILTER)
[MPU] Sending : 06 05 01 90 00 00  (PROP_WIFI_SETTING)
[MPU] Sending : 06 05 01 8b 00 00  (PROP 8004004E)
[MPU] Sending : 08 06 01 91 00 00 00 00  (PROP_BUILTINGPS_PINPOINTING_INTERVAL_SETTING)
[MPU] Sending : 06 05 01 98 00 00  (PROP 80040056)
[MPU] Sending : 08 06 01 88 07 08 00 00  (PROP 8000004F)
[MPU] Sending : 06 05 03 37 00 00  (PROP_MIRROR_DOWN_IN_MOVIE_MODE)
[MPU] Sending : 06 05 01 92 07 00  (PROP_IMAGE_ASPECT_RATIO)
[MPU] Sending : 0e 0c 02 04 08 00 00 00 00 00 00 01 00 00  (PROP_CFN)
[MPU] Sending : 0a 08 03 58 00 00 00 00 00 00  (PROP 8003005F)
[MPU] Sending : 06 05 03 5a 02 00  (PROP 80030060)
[MPU] Sending : 16 14 01 61 00 09 d1 3e 00 00 00 00 ff e7 ff ff 00 0a 26 fe 00 00  (PROP 80040027)
[****] Starting task 22138(5af3b0) FileMgr
[****] Starting task 22138(6cfcc0) FileCache
[****] Starting task 22138(6d00c0) RscMgr
[MPU] Sending : 0a 08 03 2f 00 00 00 00 00 00  (PROP_SPECIAL_OPTION)
[MPU] Received: 0a 08 03 06 00 00 00 00 00 00  (PROP_AVAIL_SHOT - spell #5)
[MPU] Sending : 0a 08 03 2f 00 00 00 00 00 00  (PROP_SPECIAL_OPTION)
[MPU] Received: 06 04 03 10 00 00  (PROP 80030008 - spell #6)
[MPU] Sending : 06 05 03 20 01 00  (PROP_STARTUP_CONDITION)
[MPU] Received: 06 05 03 07 ff 00  (PROP_BURST_COUNT - spell #7)
[MPU] Sending : 0c 0b 03 42 00 00 00 00 00 00 00 00  (PROP_LED_LIGHT)
[MPU] Sending : 62 61 02 12 01 20 50 00 f0 00 11 00 37 91 77 1a 00 00 ff 00 00 00 00 00 00 00 01 f8 96 00 00 00 00 00 00 01 f8 96 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 23 43 23 00 00 00 00 00 00 00 10 31 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  (Lens group)
[MPU] Received: 06 05 01 2e 01 00  (PROP_SAVE_MODE - spell #8)
[****] Starting task 21a30(6d4554) ShootCapture
[MPU] Received: 0a 08 03 0b 00 00 00 00 00 00  (PROP 80030007 - spell #9)
[DMA5] Copy [0xFF892D90] -> [0x01E00000], length [0x00065BD4], flags [0x00000001]
[DMA5] OK
[MPU] Sending : 06 05 03 05 02 00  (PROP_POWER_LEVEL)
[MPU] Sending : 06 05 04 06 05 00  (PROP_DEFAULT_LV_MANIP)
[MPU] Sending : 06 05 01 97 00 01  (PROP 8003006F)
[MPU] Sending : 06 05 04 06 05 00  (PROP_DEFAULT_LV_MANIP)
[MPU] Sending : 06 05 01 2e 01 00  (PROP_SAVE_MODE)
[MPU] Sending : 06 05 04 06 05 00  (PROP_DEFAULT_LV_MANIP)
[****] Starting task ff4166fc(0) systemtask
[****] Starting task 21a30(6e9ab0) ShootBlack
[****] Starting task 21a30(6ee410) ShootPreDevelop
[****] Starting task 22138(6ee664) SAF
[MPU] Received: 08 06 00 00 01 97 00 00  (Complete WaitID = 0x8003006F PROP 8003006F - spell #3)
[MPU] Sending : 06 05 04 06 05 00  (PROP_DEFAULT_LV_MANIP)
[****] Starting task 22138(6ee6b4) SAF_CROSSTALK
[****] Starting task ff0cee8c(0) MainCtrl
[MPU] Received: 22 20 03 3b 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  (unnamed - spell #10)
[MPU] Received: 06 05 04 0e 01 00  (PROP 8002000D - spell #11)
[****] Starting task 21a30(6ef0e4) TOMgr
[****] Starting task 21a30(6f0298) Fstorage
[****] Starting task 22138(6f1510) HDRMgr
[****] Starting task 21a30(6f1698) HDRStage
[****] Starting task 22138(6f3b14) GISMgr
[****] Starting task 21a30(6f3ca8) GISStage
[****] Starting task ff144e74(0) AEmodeJudge
[****] Starting task ff4f550c(0) CSMgrTask
   104:    64.512 [RSC] hMemoryQueue (0xA20012) hStorageQueue (0xA40014)
   105:    65.792 [RSC] ### LIST 5 0 5 ###
   170:    79.616 [SND] Seq LPC fin
   196:    81.152 [ENG] [ENGIO](Addr:0x41400000, Data:0x   44000)
   212:    93.696 [FM] FM_RegisterSpaceNotifyCallback
   216:    93.952 [AUDIO] [GPS] GPS_RegisterSpaceNotifyCallback
   220:    93.952 [FM] FM_RegisterSpaceNotifyCallback
   222:    94.208 [TERMINATE] SHUTDOWN init comp
   224:    94.208 [TERMINATE] Abort init comp
   256:    97.536 [MC] [MC] PROP_HEADPHONE_VOLUME_VALUE : 0
   257:    97.536 [MC] [MC] PROP_MOVIE_PLAY_VOLUME : 10
   262:    98.048 [MC] regist master CardCover
[MPU] Received: 08 07 01 2a 1b e6 00 00  (PROP_CARD2_FILE_NUMBER - spell #12)
[****] Starting task 21a30(6f653c) FrontShtDevelop
[****] Starting task 21a30(6f68b0) DianaFrontShtDevelop
[MPU] Received: 06 05 03 07 05 00  (PROP_BURST_COUNT - spell #13)
[****] Starting task 21a30(6f6d08) RearShtDevelop
[****] Starting task 21a30(6f6eec) DianaRearShtDevelop
[****] Starting task 21a30(6f7138) ShootSsDevelop
[****] Starting task 21a30(6f74b0) ShootVfx
[MPU] Received: 0a 08 03 06 00 00 04 56 00 00  (unknown - PROP_AVAIL_SHOT)
[MPU] Received: 06 05 03 11 01 00  (PROP_ICU_AUTO_POWEROFF - spell #15)
[MPU] Received: 06 05 02 0a 00 00  (PROP_PERMIT_ICU_EVENT - spell #16)
[MPU] Sending : 06 05 01 2c 02 00  (PROP_CURRENT_MEDIA)
[MPU] Received: 06 05 03 0d 00 00  (PROP_CARD2_RECORD - spell #17)
[MPU] Sending : 12 10 03 00 b8 00 00 3a 07 00 00 00 00 00 00 00 00 00  (PROP 80030000)
[MPU] Received: 06 05 03 0c 00 00  (PROP_CARD1_RECORD - spell #18)
[MPU] Sending : 06 05 03 23 19 00  (unnamed)
[MPU] Sending : 06 05 03 04 00 00  (PROP_POWER_KIND)
[MPU] Sending : 1e 1d 03 24 45 46 2d 53 31 37 2d 35 35 6d 6d 20 66 2f 32 2e 38 20 49 53 20 55 53 4d 00 00  (PROP_LENS_NAME)
[****] Starting task ff0d8260(0) GuiLockTask
   306:   112.640 [PRP] M:B8 F:0 L:0 P:3A T:7
   307:   112.896 [STARTUP] update coded version.
[MPU] Received: 06 05 03 19 01 00  (PROP_TFT_STATUS - spell #19)
[MPU] Sending : 06 04 03 25 00 00  (unnamed)
[MPU] Sending : 24 23 03 15 01 20 50 00 f0 00 11 00 37 91 77 1a 00 00 ff 00 00 00 00 00 00 00 01 f8 96 00 00 00 00 21 00 00  (PROP_LENS)
[MPU] Sending : 24 22 03 3c 00 00 01 f8 96 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  (PROP 8003003C)
[MPU] Sending : 06 05 03 5d 8e 00  (PROP 80030062)
[MPU] Sending : 24 23 03 15 01 20 50 00 f0 00 11 00 37 91 77 1a 00 00 ff 00 00 00 00 00 00 00 01 f8 96 00 00 00 00 21 00 00  (PROP_LENS)
[MPU] Sending : 06 05 01 3d 00 00  (PROP_TEMP_STATUS)
[MPU] Sending : 06 05 03 37 00 00  (PROP_MIRROR_DOWN_IN_MOVIE_MODE)
[MPU] Sending : 06 05 04 06 05 00  (PROP_DEFAULT_LV_MANIP)
[MPU] Sending : 06 05 03 0d 00 00  (PROP_CARD2_RECORD)
[MPU] Sending : 06 05 03 0c 00 00  (PROP_CARD1_RECORD)
[****] Starting task 22138(726c5c) ASIF
[****] Starting task 22138(726dac) AudioCtrl
[****] Starting task 22138(72b5f0) SoundEffect
[****] Starting task 22138(72c400) MovWriter
[****] Starting task 22138(72caf8) MovieRecorder
[****] Starting task 22138(744124) MoviePlay
[****] Starting task ff1e6754(0) AviRead
[****] Starting task 22138(74441c) MovReader
[****] Starting task 22138(7446b4) LVC_DEV
[****] Starting task ff0f99a8(0) LVC_FACE
[****] Starting task 22138(7456dc) Gmt
[MPU] Received: 06 05 09 11 01 00  (PROP_LV_DISPSIZE - spell #20)
[MPU] Received: 12 11 09 15 00 00 00 00 00 00 00 00 00 00 00 00 00 00  (PROP 80050020 - spell #21)
[MPU] Received: 14 13 09 25 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  (unnamed - spell #22)
[MPU] Received: 06 05 01 5a 00 00  (PROP_CONTINUOUS_AF_VALID - spell #23)
[MPU] Received: 06 05 09 2f 01 00  (unnamed - spell #24)
[MPU] Sending : 06 05 01 59 01 00  (PROP_MOVIE_SERVO_AF)
[****] Starting task 22138(75c320) Evf
[MPU] Received: 14 13 09 25 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  (unnamed - spell #25)
[MPU] Received: 06 05 01 5a 01 00  (PROP_CONTINUOUS_AF_VALID - spell #26)
[MPU] Sending : 06 05 01 59 01 00  (PROP_MOVIE_SERVO_AF)
[****] Starting task 22138(767838) Epp
[****] Starting task 22138(76add8) LVFACE
[****] Starting task 22138(76b04c) LVICV
[****] Starting task 22138(76b2e8) CLR_CALC
[****] Starting task 22138(76cbd4) AeWb
[MPU] Received: 0a 08 09 1a 00 00 00 00 00 00  (PROP 8005002A - spell #27)
[MPU] Received: 0a 08 09 24 00 00 00 00 00 00  (unnamed - spell #28)
[MPU] Received: 08 06 03 18 00 00 00 00  (PROP 8003000F - spell #29)
[MPU] Received: 08 06 03 1f 00 00 00 00  (PROP 80030019 - spell #30)
[MPU] Sending : 06 05 01 58 00 00  (PROP_VIDEOSNAP_MODE)
[MPU] Received: 06 05 03 13 00 00  (PROP_LOGICAL_CONNECT - spell #31)
[MPU] Received: 06 05 03 1e 00 00  (PROP 8003001A - spell #32)
[MPU] Received: 06 05 01 8a 00 00  (PROP_SW2_MOVIE_START - spell #33)
[MPU] Received: 08 06 03 1f 00 00 00 00  (PROP 80030019 - spell #34)
[MPU] Sending : 06 05 01 8a 00 00  (PROP_SW2_MOVIE_START)
[MPU] Received: 0a 08 01 3b ff ff 00 00 00 00  (PROP_USBDEVICE_CONNECT - spell #35)
[MPU] Received: 0a 08 01 3b ff 00 00 00 00 00  (PROP_USBDEVICE_CONNECT - spell #36)
[MPU] Sending : 06 05 03 38 8f 00  (PROP 80030035)
[****] Starting task ff10cd40(0) SoundDevice
[****] Starting task 22138(72b4f4) AudioLevel
[****] Starting task ff203358(0) TestGero
[****] Starting task 21a30(787d8c) GaUSB20Drv
[****] Starting task ff285ae8(0) USBTrns
[****] Starting task ff28757c(0) SDIOTrns
[****] Starting task ff283c10(78a908) PTPSessionTASK
[****] Starting task 21a30(7ab800) PtpDps
[****] Starting task 22138(806bf8) Ceres
[****] Starting task 21a30(80b554) Remote
[****] Starting task 21a30(82a498) Fcreate
   351:    88.576 [MR] mvrChangeAckCBR : Video - Mode=0, Type=0, Rate=24, GOP=12
   394:    96.768 [LVDTS] WARN First Get DTS_GetAllRandomData
   395:    96.768 [LVDTS] WARN First Get DTS_GetAllRandomData
   403:    98.304 SPECIAL_OPTION AF MOVIE GERO OFF
   409:    98.816 [LVDTS] WARN First Get DTS_GetAllRandomData
   410:    98.816 [LVDTS] WARN First Get DTS_GetAllRandomData
   411:    98.816 [LVDTS] WARN First Get DTS_GetAllRandomData
   414:    98.816 [LVDTS] WARN First Get DTS_GetAllRandomData
   415:    98.816 [LVDTS] WARN First Get DTS_GetAllRandomData
   417:    98.816 [LVDTS] WARN First Get DTS_GetAllRandomData
   418:    98.816 [LVDTS] WARN First Get DTS_GetAllRandomData
   423:    99.072 [LVDTS] WARN First Get DTS_GetAllRandomData
   424:    99.072 [LVDTS] WARN First Get DTS_GetAllRandomData
   425:    99.328 [LVDTS] WARN First Get DTS_GetAllRandomData
   426:    99.328 [LVGMT]  PROP_LV_PROHIBIT_OUTPUT 0 0
   427:    99.328 [LVDTS] WARN First Get DTS_GetAllRandomData
   429:    99.328 [LVGMT]  PROP_LV_CFILTER[0][0] 
   430:    99.328 [LVGMT]  PROP_LV_CENTER_OF_DIORAM_CFILTER[2684][1793]
   434:   100.096 [LVDTS] WARN First Get DTS_GetAllRandomData
   435:   100.096 [LVDTS] WARN First Get DTS_GetAllRandomData
   444:   102.144 [LVCOM] InitializeLiveViewDefectDetection
   445:   102.656 [LVCOM] ExecuteDefectMarge Start
   446:   102.912 [LVCOM] ExecuteDefectMarge End
   450:   103.168 [LVDTS] WARN First Get DTS_GetAllRandomData
   451:   103.168 [LVDTS] WARN First Get DTS_GetAllRandomData
   465:   108.544 [AF] Ratio:30 Reboot:2 !!!
   467:   108.544 [LV]  PROP_LV_BLOCK  PROP_LV_UNBLOCKING 0
   478:   112.384 [AUDIO] RegisterCBRSDIOCableConnect
   506:   116.480 [WFT] PROP_ADAPTER_DEVICE_ACTIVE: Can Not Change(0) Connect(0)
   544:   121.600 [PTP] PSI UnlockTransImg : Trans List is NULL
   545:   121.856 [PTP] PSI TarminateTransImgList : SessionTarget [1]
   546:   121.856 [PTP] PSI TarminateTransImgList : Trans List is NULL
   549:   121.856 [PTP] PSI UnlockTransImg : Trans List is NULL
   550:   121.856 [PTP] PSI TarminateTransImgList : SessionTarget [10]
   551:   121.856 [PTP] PSI TarminateTransImgList : Trans List is NULL
   553:   122.112 [PTP] PSI DisconnectViewFinder
   560:   122.624 [PTP] PROP_SCREEN_SAVER 0
   563:   122.624 [PTPCOM] SetPtpTransportResources:0,323d
   565:   122.880 [PTP] PSI UnlockTransImg : Trans List is NULL
   566:   122.880 [PTP] PSI TarminateTransImgList : SessionTarget [10]
   567:   122.880 [PTP] PSI TarminateTransImgList : Trans List is NULL
   597:   125.440 [WFT] Regist PropCBR PROP_WFT_BLUETOOTH
SD: Unknown CMD1
[SDIO] Error
SD: Unknown CMD1
[SDIO] Error
SD: Unknown CMD1
[SDIO] Error
   630:   155.648 [SD] ERROR SDINTREP=0x00000000
   631:   155.648 [SD] ERROR UNEXPECTED ERROR
   658:   187.392 [FM] FileNo (DriveNo = 2, 0 <-> 7142)
   659:   187.392 [FM] FreeCluster (DriveNo = 2, 11628 <-> 932093)
[MPU] Received: 0a 08 03 06 00 00 00 0b 00 00  (unknown - PROP_AVAIL_SHOT)
[****] Starting task 21a30(8b4da4) Fwrite
[****] Starting task 22138(8b550c) Sound
[MPU] Received: 08 07 01 2a 1b e6 00 00  (PROP_CARD2_FILE_NUMBER - spell #37)
[MPU] Received: 08 07 01 2a 1b e6 00 00  (PROP_CARD2_FILE_NUMBER - spell #37)
[****] Starting task 21a30(8b4b58) Fread
[****] Starting task 22138(8b52c8) Voice
[****] Starting task 22138(8b5624) WavReader
[****] Starting task 22138(8b5b08) Gps
[****] Starting task 21a30(8cfb9c) ShootArtFilter
[****] Starting task 22138(944a6c) TouchMgr
[****] Starting task 22138(944c48) DisplayMgr
[****] Starting task ff0d72a0(0) GuiMainTask
[****] Replacing task ff0d72a0 with ac6b0
[****] Starting task ff239654(0) ImgPlayDrv
[****] Starting task ff327478(0) CtrlSrv
[MPU] Received: 06 05 03 19 01 00  (PROP_TFT_STATUS - spell #39)
[****] Starting task 22138(8cc94c) ReDevelop
[****] Starting task 22138(8cc9f0) DpMgr
[****] Starting task ff24ede0(0) DpsReceiveTask
[****] Starting task 22138(8cecc8) DpImgEditMgr
[****] Starting task 22138(8ceeec) InnerDevelopMgr
[****] Starting task 22138(945cd4) CEC
[****] Starting task ff31ba90(0) EyeFi
[MPU] Received: 1e 1c 01 4e 00 00 00 00 00 00 00 00 00 00 00 18 00 00 00 0c 00 00 00 00 00 00 00 02 00 00  (PROP_VIDEO_MODE - spell #40)
[MPU] Sending : 1e 1c 01 4e 00 00 00 00 00 00 00 00 00 00 00 18 00 00 00 0c 00 00 00 00 00 00 00 02 00 00  (PROP_VIDEO_MODE)
[MPU] Received: 1e 1c 01 4e 00 00 00 00 00 00 00 00 00 00 00 18 00 00 00 0c 00 00 00 00 00 00 00 02 00 00  (PROP_VIDEO_MODE - spell #40)
[MPU] Sending : 06 05 01 53 01 00  (PROP_AF_DURING_RECORD)
[MPU] Received: 06 05 03 19 01 00  (PROP_TFT_STATUS - spell #42)
[MPU] Sending : 06 05 01 58 00 00  (PROP_VIDEOSNAP_MODE)
[MPU] Received: 06 05 03 19 01 00  (PROP_TFT_STATUS - spell #42)
[MPU] Sending : 06 05 01 59 01 00  (PROP_MOVIE_SERVO_AF)
[MPU] Received: 06 05 02 0a 01 00  (PROP_PERMIT_ICU_EVENT - spell #44)
[MPU] Sending : 06 05 01 49 01 00  (PROP_LIVE_VIEW_AF_SYSTEM)
[MPU] Received: 06 05 03 19 01 00  (PROP_TFT_STATUS - spell #45)
[MPU] Sending : 1e 1c 01 4e 00 00 00 00 00 00 00 00 00 00 00 18 00 00 00 0c 00 00 00 00 00 00 00 02 00 00  (PROP_VIDEO_MODE)
[****] Starting task ff492674(0) PTPtoFAPI_EventProcTask
[****] Starting task 22138(8cc42c) Mrk
[MPU] Received: 06 05 04 00 00 00  (NotifyGUIEvent - spell #46)
[****] Starting task 22138(847454) MetaCtg
[****] Starting task ff1df3b8(0) LpfMode
   699:   194.816 [FM] [GPS] GPS_Initialize (36, 25)
   775:   201.472 [DP] LOGICAL_CONNECT [0x00000000]
   777:   201.728 [PROPAD] ERROR GetPropertyData ID (0) = 0x02050038
   778:   201.728 [PRP] ERROR NOT FOUND PROPERTY ID = 0x02050038 L:2411
   779:   201.728 [DP] PROP_WIFI_SETTING [0]
   799:   207.104 WARN localI2C_Read : 377
   800:   207.360 WARN localI2C_Read : 377
   801:   207.616 WARN localI2C_Read : 377
   802:   208.128 WARN localI2C_Read : 377
   803:   208.384 WARN localI2C_Read : 377
   804:   208.896 WARN localI2C_Read : 377
   805:   208.896 [HDMI] cec_initialize_reg_set : END
   806:   209.408 WARN localI2C_Read : 377
   807:   209.664 WARN localI2C_Read : 377
   808:   210.176 WARN localI2C_Read : 377
   809:   210.176 [HDMI] Logical Address Set : End
   810:   210.176 [HDMI] CEC DEVICE SETUP
   811:   210.688 [HDMI] InitializeHDMI
   818:   221.440 [IMPP] H264E InitializeH264EncodeFor1080pDZoom
   819:   221.696 [IMPP] H264E InitializeH264EncodeFor1080p25fpsDZoom
  1054:   242.688 [MR_MOV] (Empty Func) MVW_RegisterXmpDataCallback
  1068:   243.200 [HDMI] CEC OFF
  1086:   244.224 [STARTUP] startupInitializeComplete
  1089:   244.480 [MC] guimode comp. 0
  1104:   244.992 [MC] guimode comp. 0
  1152:   249.344 [MR] mvrChangeAckCBR : Video - Mode=0, Type=0, Rate=24, GOP=12
  1160:   251.648 [LVDTS] WARN First Get DTS_GetAllRandomData
  1161:   251.648 [LVDTS] WARN First Get DTS_GetAllRandomData
[MPU] Received: 08 06 04 0c 03 00 00 00  (PROP_SHOOTING_TYPE - spell #53)
[MPU] Received: 06 05 03 1d 1f 00  (unknown - PROP_BATTERY_REPORT)
[MPU] Sending : 06 05 01 53 01 00  (PROP_AF_DURING_RECORD)
[MPU] Received: 06 05 08 06 ff 00  (unknown - COM_FA_CHECK_FROM)
  1179:   264.192 [MR] mvrChangeAckCBR : Video - Mode=0, Type=0, Rate=24, GOP=12
[MPU] Sending : 06 05 01 58 00 00  (PROP_VIDEOSNAP_MODE)
[MPU] Sending : 06 05 01 59 01 00  (PROP_MOVIE_SERVO_AF)
  1186:[MPU] Sending : 06 05 01 49 01 00  (PROP_LIVE_VIEW_AF_SYSTEM)
   267.264 [LVDTS] WARN First Get DTS_GetAllRandomData
  1187:   267.264 [LVDTS] WARN First Get DTS_GetAllRandomData
[MPU] Sending : 06 05 06 11 01 00  (GUI_SWITCH)
[MPU] Sending : 06 05 06 12 00 00  (GUI_SWITCH)
[MPU] Sending : 46 45 0a 08 ff 1f 01 00 00 00 00 00 00 00 01 03 50 20 28 01 01 00 60 04 01 04 87 00 00 00 00 00 00 01 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  (PD_NotifyOlcInfoChanged)
[MPU] Sending : 08 06 01 04 00 00 00 00  (PROP_AF_MODE)
[MPU] Sending : 06 05 03 37 00 00  (PROP_MIRROR_DOWN_IN_MOVIE_MODE)
[MPU] Sending : 06 05 04 00 00 01  (NotifyGUIEvent)
[MPU] Sending : 08 06 04 0c 03 00 01 00  (PROP_SHOOTING_TYPE)
  1233:   282.368 [MC] guimode comp. 0
[MPU] Received: 08 06 00 00 04 00 00 00  (Complete WaitID = 0x80020000 - spell #47)
[MPU] Received: 06 05 03 19 01 00  (PROP_TFT_STATUS - spell #56)
[MPU] Received: 06 04 04 13 00 00  (unknown - PROP 80020012)
[DMA5] Copy [0xFFA14DDC] -> [0xD0288000], length [0x00006E74], flags [0x00000001]
[DMA5] OK
[DMA5] Copy [0xFFA1BC50] -> [0xD0280000], length [0x000001C0], flags [0x00000001]
[DMA5] OK
[DMA5] Copy [0xFFA1BE10] -> [0x01E80000], length [0x00001A28], flags [0x00000001]
[DMA5] OK
[MPU] Received: 08 06 00 00 04 0c 00 00  (unknown - Complete WaitID)
[MPU] Received: 14 13 09 25 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  (unnamed - spell #25)
[MPU] Received: 06 05 03 19 01 00  (PROP_TFT_STATUS - spell #39)
[MPU] Received: 06 04 09 00 00 00  (unknown - PROP_LV_LENS)
[MPU] Received: 06 05 09 0b 02 00  (unknown - PROP_LV_AF_RESULT)
[MPU] Received: 0a 08 09 24 ff ff 00 00 00 00  (unknown - unnamed)
[MPU] Received: 06 05 0e 00 01 00  (unknown - unnamed)
  1274:   285.696 [RSC] ###!! Lv or MovieRec (X 48000064)18:0
  1275:   285.952 [RSC] ###!! Lv or MovieRec (46000064)
  1282:   286.720 [LVDTS] WARN First Get DTS_GetAllRandomData
  1283:   286.720 [LVDTS] WARN First Get DTS_GetAllRandomData
  1284:   286.720 [LVDTS] WARN First Get DTS_GetAllRandomData
  1289:   286.976 [LVDTS] WARN First Get DTS_GetAllRandomData
  1290:   286.976 [LVDTS] WARN First Get DTS_GetAllRandomData
  1291:   286.976 [LVDTS] WARN First Get DTS_GetAllRandomData
  1295:   287.232 [LVDTS] WARN First Get DTS_GetAllRandomData
  1296:   287.232 [LVDTS] WARN First Get DTS_GetAllRandomData
  1297:   287.232 [LVDTS] WARN First Get DTS_GetAllRandomData
  1307:   288.512 [LVDTS] WARN First Get DTS_GetAllRandomData
  1308:   288.512 [LVDTS] WARN First Get DTS_GetAllRandomData
  1309:   288.512 [LVDTS] WARN First Get DTS_GetAllRandomData
  1313:   289.024 [LVDTS] WARN First Get DTS_GetAllRandomData
  1326:   289.792 [LVDTS] WARN First Get DTS_GetAllRandomData
  1327:   290.048 [LVDTS] WARN First Get DTS_GetAllRandomData
  1329:   290.304 [LVDTS] WARN First Get DTS_GetAllRandomData
  1330:   290.560 [LVDTS] WARN First Get DTS_GetAllRandomData
  1332:   291.072 [LVDTS] WARN First Get DTS_GetAllRandomData
  1334:   291.328 [LVICV] LVICV_SetResource Rsc:0 Img:0
[****] Starting task 9ecb4(0) ml_init
  1430:   369.920 [TCH]ERROR  TouchPanelIC Ack Error
Lens moving (0, 0)
[****] Starting task 9ea30(0) ml_backup
[****] Starting task a6578(0) menu_task
[****] Starting task a911c(0) menu_redraw_task
[****] Starting task b2110(0) bitrate_task
[****] Starting task bd604(0) focus_task
[****] Starting task bdfe0(0) notifybox_task
[****] Starting task c10e4(0) fps_task
[****] Starting task c82f8(0) shoot_task
[****] Starting task c4c38(0) clock_task
[****] Starting task cedbc(0) audio_common_task
[****] Starting task d59d4(0) livev_hiprio_task
[****] Starting task d4744(0) cls_task
[****] Starting task e0588(0) console_task
[****] Starting task ab7b4(0) debug_task
[****] Starting task b337c(0) tweak_task
[****] Starting task bde24(0) focus_misc_task
[****] Starting task ca43c(0) vignetting_init
[****] Starting task e5d14(0) module_task
[****] Starting task d5570(0) livev_loprio_task
Scanning modules...
Load modules...
Linking..
Register modules...
Load configs...
Init modules...
Updating symbols...
  [i] 404: edmac_format_size 9fb90
  [i] 404: edmac_format_size a1ea0
  [i] 404: edmac_format_size aab70
  [i] 404: edmac_format_size ac630
  [i] 404: dual_iso_get_recovery_iso b4e80
  [i] 404: dual_iso_is_active b4e80
  [i] 404: auto_ettr_intervalometer_wait c1bf0
  [i] 404: auto_ettr_intervalometer_warning c1bf0
  [i] 404: auto_ettr_export_correction cc820
  [i] 404: dual_iso_get_dr_improvement db2e0
  [i] 404: dual_iso_get_recovery_iso db2e0
  [i] 404: edmac_format_size df9c0
Modules loaded
updating Movie Tweaks -> Movie Logging
updating Movie Tweaks -> Time Indicator
Key event: 26 -> 2701
[MPU] Sending : 06 05 06 27 01 00  (GUI_SWITCH)
Key event: 26 -> 2701
[MPU] Sending : 06 05 06 27 01 00  (GUI_SWITCH)
[MPU] Received: 08 06 04 0c 00 00 00 00  (PROP_SHOOTING_TYPE - spell #53)
[MPU] Sending : 08 06 04 0c 00 00 01 00  (PROP_SHOOTING_TYPE)
[MPU] Received: 06 05 04 00 00 00  (NotifyGUIEvent - spell #46)
[MPU] Sending : 06 05 04 00 00 01  (NotifyGUIEvent)
[MPU] Received: 08 06 00 00 04 0c 00 00  (unknown - Complete WaitID)
[MPU] Received: 06 05 03 19 01 00  (PROP_TFT_STATUS - spell #56)
[MPU] Received: 06 05 03 19 01 00  (PROP_TFT_STATUS - spell #56)
[MPU] Received: 06 05 04 00 00 00  (NotifyGUIEvent - spell #46)
[MPU] Sending : 06 05 04 00 00 01  (NotifyGUIEvent)
[MPU] Received: 08 06 04 0c 03 00 00 00  (PROP_SHOOTING_TYPE - spell #53)
[MPU] Sending : 08 06 04 0c 03 00 01 00  (PROP_SHOOTING_TYPE)
[MPU] Received: 06 04 04 13 00 00  (unknown - PROP 80020012)
[MPU] Received: 06 05 03 19 01 00  (PROP_TFT_STATUS - spell #56)
[MPU] Received: 06 05 03 19 01 00  (PROP_TFT_STATUS - spell #56)
[MPU] Received: 06 05 03 19 00 00  (unknown - PROP_TFT_STATUS)
Key event: 26 -> 2701
[MPU] Sending : 06 05 06 27 01 00  (GUI_SWITCH)
[MPU] Received: 08 06 04 0c 00 00 00 00  (PROP_SHOOTING_TYPE - spell #53)
[MPU] Sending : 08 06 04 0c 00 00 01 00  (PROP_SHOOTING_TYPE)
[MPU] Received: 06 05 04 00 00 00  (NotifyGUIEvent - spell #46)
[MPU] Sending : 06 05 04 00 00 01  (NotifyGUIEvent)
[MPU] Received: 06 05 03 19 01 00  (PROP_TFT_STATUS - spell #56)
[MPU] Received: 06 05 03 19 01 00  (PROP_TFT_STATUS - spell #56)
[MPU] Received: 06 05 03 19 01 00  (PROP_TFT_STATUS - spell #56)
[MPU] Received: 06 05 03 19 01 00  (PROP_TFT_STATUS - spell #56)
[MPU] Received: 06 05 04 00 00 00  (NotifyGUIEvent - spell #46)
[MPU] Sending : 06 05 04 00 00 01  (NotifyGUIEvent)
[MPU] Received: 08 06 04 0c 03 00 00 00  (PROP_SHOOTING_TYPE - spell #53)
[MPU] Sending : 08 06 04 0c 03 00 01 00  (PROP_SHOOTING_TYPE)
[MPU] Received: 06 04 04 13 00 00  (unknown - PROP 80020012)
[MPU] Received: 06 05 03 19 01 00  (PROP_TFT_STATUS - spell #56)
[MPU] Received: 06 05 03 19 01 00  (PROP_TFT_STATUS - spell #56)
[MPU] Received: 06 05 03 19 00 00  (unknown - PROP_TFT_STATUS)
Default raw buffer OK for 0x727 (0).
raw update from livev_hiprio_task
LV RAW size too small
Key event: 50 -> 1901
[MPU] Sending : 06 05 06 19 01 00  (GUI_SWITCH)
[MPU] Received: 06 05 04 00 06 00  (NotifyGUIEvent - spell #46)
[MPU] Sending : 06 05 04 00 06 01  (NotifyGUIEvent)
Key event: d0 -> 1900
[MPU] Sending : 06 05 06 19 00 00  (GUI_SWITCH)

Log diff.

The ROM is from you:
Code: [Select]
700154260069474f478dc4904862e4de  EOSM/ROM1.BIN
a3eefdfb3f9ed2ab4516423866e56b64  EOSM/SFDATA.BIN

Some messages are in different order; this may indicate a race condition. One way to diagnose these is to run in deterministic emulation mode, with -icount (try -icount 1, -icount 2 ... -icount 10). That way, if we both run with -icount 5, we should get the same execution trace (repeatable). By default, the execution is not deterministic; it just tries to mimic the real-time clock to some extent, and depends a lot on the host CPU speed.

Here, all -icount settings from 1 to 15 are working well; the last ones are too slow to be practical. Try one of them. Unfortunately, we can't set intermediate values, so the issue is hard to debug.

A similar issue happens on 6D: different CPU speeds between my local machine and the build server cause the menu navigation test to pass nearly all the time on mine, and fail (with only one screenshot slightly different, but repeatable) on the server.


Got another suggestion: spell #4 is not recognized in your log. What if you change it in mpu_spells/EOSM.h?
Code: [Select]
-    { { 0x0a, 0x08, 0x03, 0x57, 0x10, 0x33, 0x00, 0x01, 0x00 }, .description = "PROP 8003005E", .out_spells = { /* spell #4 */
+    { { 0x0a, 0x08, 0x03, 0x57, ARG0, ARG1, 0x00, 0x01, 0x00 }, .description = "PROP 8003005E", .out_spells = { /* spell #4 */

That change would match any argument for that property. Our emulated MPU waits for this property in order to send properties 8003005F and 80030060 (whatever these do, I have no idea); yours property 8003005E is set to 0x31. That must be a setting from Canon menu.

edit: maybe not?
Code: [Select]
FF0F5280:
  DebugMsg(129, 3, "PROP_RequestChange PROP_LEO_LENSID 0x%lx Tender 0x%x Ver 0x%x", v6);
  prop_request_change(0x8003005E, &v6, 4);

known_spells.py:
Code: [Select]
    "03 57"  :   (0x8003005E, "PROP_LEO_LENSID",            (4, "ARG0"), (5, "ARG1")),
    "03 58"  :   (0x8003005F, "PROP_LEO_LENS_START"),
    "03 5a"  :   (0x80030060, "PROP_LEO_LENS_END"),

Fix committed, let's hope it works :D
Logged

dfort

  • Guest
Re: Canon EOS M
« Reply #1412 on: March 24, 2018, 04:01:17 PM »
Rebuilt qemu with the latest changes, tried the various ROM's and SFDATA files I've got (can't find that exact match), found an -icount setting in run_tests.sh but the tests don't work work on the Mac--basically going down in flames here.

No matter what I do, EOSM emulation comes to a screeching halt on:

Code: [Select]
[MPU] Received: 08 06 00 00 01 97 00 00  (Complete WaitID = 0x8003006F PROP 8003006F - spell #3)
[MPU] Sending : 06 05 04 06 05 00  (PROP_DEFAULT_LV_MANIP)
[EEPROM-DMA]! [0x10000] -> [0x4FE00000] (0x0 bytes)
    67:    41.728 [PROPAD] SerialFlash Packages!! 0x7

Going back to the reason I tried running the latest lua_fix on QEMU -- if you set the Config option to "SET at startup - Required to load ML" do you see the LED lit on startup?
Logged

a1ex

  • Administrator
  • Hero Member
  • *****
  • Posts: 12564
Re: Canon EOS M
« Reply #1413 on: March 24, 2018, 04:15:49 PM »
Yes, I see it. ML turns on the LED at startup, and expects Canon firmware to do some sort of file I/O to turn it off.

Code: [Select]
./run_canon_fw.sh 700D,firmware="boot=0" -d io |& grep -a LED
[GPIO] at CSMgrTask:FF4E3038:FF74CA58 [0xC022C188] <- 0x138800  : Card LED
[GPIO] at CSMgrTask:FF4E3068:FF74CB10 [0xC022C188] <- 0x838C00  : Card LED
...
[GPIO]   at FileMgr:FF4E3038:FF74CA58 [0xC022C188] <- 0x138800  : Card LED
[GPIO]   at FileMgr:FF4E3068:FF74CB10 [0xC022C188] <- 0x838C00  : Card LED
...
[GPIO]   at MetaCtg:FF4E3038:FF74CA58 [0xC022C188] <- 0x138800  : Card LED
[GPIO]   at MetaCtg:FF4E3068:FF74CB10 [0xC022C188] <- 0x838C00  : Card LED

Code: [Select]
(./run_canon_fw.sh EOSM,firmware="boot=0" -d io -s -S & arm-none-eabi-gdb -x EOSM/patches.gdb) |& grep -a LED
[GPIO]         at 0x00102E98:06626400 [0xC022C188] <- 0x83DC00  : Card LED

 (./run_canon_fw.sh EOSM,firmware="boot=1" -d io -s -S & arm-none-eabi-gdb -x EOSM/patches.gdb) |& grep -a LED
[GPIO]         at 0x00102E98:06626400 [0xC022C188] <- 0x83DC00  : Card LED
[GPIO]         at 0x00102824:001028B8 [0xC022C188] <- 0x93D800  : Card LED
[GPIO]         at 0x00102830:0010950C [0xC022C188] <- 0x83DC00  : Card LED
[GPIO]         at 0x00869E0C:0010E470 [0xC022C188] <- 0x138800  : Card LED  <--- here's ML turning on the LED in reboot.c

Yet another EOS M quirk - Canon firmware accessing the SD card without turning on the LED (or maybe the SD LED has a different color and ML has it wrong?)

Some pattern matching will reveal what's going on.

Code: [Select]
... "boot=0" -d io,debugmsg |& grep CSMgr -a

700D:
[   CSMgrTask:ff74c98c ] (23:01) sdReadBlk: st=0, num=1, buf=0x4082fee0
[GPIO] at CSMgrTask:FF4E3038:FF74CA58 [0xC022C188] <- 0x138800  : Card LED
[   CSMgrTask:ff74b3e8 ] (23:01) sdDMAReadBlk: st=0, num=1

M:
[   CSMgrTask:ff642944 ] (23:01) sdReadBlk: st=0, num=1, buf=0x40845f80
[   CSMgrTask:ff6413a0 ] (23:01) sdDMAReadBlk: st=0, num=1

Looks like the M really accesses the card without turning on the LED, as far as I could tell from the I/O activity. Nevermind, added a LED fade-out feedback if ML is disabled (that will also turn off the LED when it ends).

Quote
No matter what I do, EOSM emulation comes to a screeching halt [...]
May I have a copy of the bad ROM/SFLASH to take a closer look?
Logged

dfort

  • Guest
Re: Canon EOS M
« Reply #1414 on: March 24, 2018, 05:32:33 PM »
Ok--looks like the QEMU issues were due to some bad SFDATA.BIN dumps I've been using. All good now and I can also recreate the issue in QEMU:



LED indicator in the lower right corner is on in QEMU and on the camera it is solid red.

On the Mac I'm having to press "M" to get out of a grey screen to the menu screen then "L" to get to LiveView then fn + delete to get to the ML menus.

Pulled in the commit that should fix this but it is still exhibiting the same behavior on the EOSM.
Logged

a1ex

  • Administrator
  • Hero Member
  • *****
  • Posts: 12564
Re: Canon EOS M
« Reply #1415 on: March 24, 2018, 05:38:58 PM »
Really? Mind recording a video? The LED should now fade out after booting...

In QEMU, with that commit it blinks a few times and then stays off.
Logged

dfort

  • Guest
Re: Canon EOS M
« Reply #1416 on: March 24, 2018, 06:24:24 PM »
Logged

a1ex

  • Administrator
  • Hero Member
  • *****
  • Posts: 12564
Re: Canon EOS M
« Reply #1417 on: March 24, 2018, 09:15:35 PM »
If that really includes changeset 8b6b858, the result is very surprising. Are you able to see the fade out effect on 700D, for example?

If yes: are you able to see the LED blinks on the M with CONFIG_HELLO_WORLD?


Code: [Select]
FF4EFD08 led_enable
FF34849C j_led_enable

DebugMsg(36, 3, "LED Permit"); // if PROP_TFT_STATUS is 0 aka display on?
j_led_enable(1);

DebugMsg(36, 3, "LED Prohibit"); // from PROP_SCREEN_SAVER?
j_led_enable(0);

So yeah, Canon code really makes an effort to suppress the LED activity during card access. If I understand well, only when the main display is off?! Why?!
Logged

dfort

  • Guest
Re: Canon EOS M
« Reply #1418 on: March 25, 2018, 05:30:58 AM »
Quote from: a1ex on March 24, 2018, 09:15:35 PM
If that really includes changeset 8b6b858

Oops. Note to self: Make sure to do an "hg update" after an "hg pull" command.

It is working fine on the EOSM, no lingering LED. Starting without loading ML still shows the shutter-bug, darn it. CONFIG_HELLO_WORLD blinks the LED.

Also tested and working fine on the 700D.
Logged

kiru

  • New to the forum
  • *
  • Posts: 3
Re: Canon EOS M
« Reply #1419 on: March 26, 2018, 03:46:42 AM »
Quote from: dfort on March 23, 2018, 06:44:03 PM
Your EF-M 18-55mm and that card that you're using should show the shutter-bug. It doesn't always show up right away. Shoot some stills, restart the camera, delete your CR2 files, restart the camera, change your ML configuration, change it back, restart the camera, eventually the filesystem will become fragmented and the shutter-bug will most likely show up. Format the card in camera and the shutter-bug might go away but it will most likely return with that lens/card combination.

Thanks. I did few photo shoots and videos, however all with default configuration and the memory card is still fresh(not formatted after ML installation). I guess I will need to wait for few more days of usage before the shutterbug kicks in. Will keep this thread posted.
Logged

Licaon_Kter

  • Hero Member
  • *****
  • Posts: 519
  • M
Re: Canon EOS M
« Reply #1420 on: March 26, 2018, 11:10:40 AM »
@dfort @kiru
Aren't Sandisk cards known to be immune to this? maybe this model is too
Logged

dfort

  • Guest
Re: Canon EOS M
« Reply #1421 on: March 26, 2018, 04:27:04 PM »
SanDisk Extreme Pro cards 32GB and under are mostly immune though I have had an instance where the shutter-bug showed up on one of these cards too.

I can provide a build that should be able to show the shutter-bug on pretty much any card:

https://www.magiclantern.fm/forum/index.php?topic=21728.msg198456#msg198456

Quote from: kiru on March 26, 2018, 03:46:42 AM
I guess I will need to wait for few more days of usage before the shutterbug kicks in.

Just try this combination:
  • Your EF-M 18-55mm STM
  • The 64GB card you showed on Reply #1407
  • Start the camera normally with ML  - no need to load any module or change settings. Lens must be mounted on startup.
  • Try shooting a still photo, CR2 or JPEG. The shutter-bug doesn't affect movie recording.
Logged

dfort

  • Guest
Re: Canon EOS M
« Reply #1422 on: March 27, 2018, 05:24:35 AM »
I've got a couple of third party EF-M to EF adapters. The top one is a Fotasy and the bottom one a Fotodiox. Note that the Fotasy adapter has a push button. This is an important difference. One of my lenses almost got stuck on the Fotasy adapter. No problems with the Fotodiox adapter.



Turns out that the Fotodiox adapter is pretty much identical to the Canon adapter. FYI--buyer beware.
Logged

tupp

  • Member
  • ***
  • Posts: 130
Re: Canon EOS M
« Reply #1423 on: April 23, 2018, 07:57:52 AM »
Hi!

Great work being done with the EOSM (and other models) in regards to raw with SD card overclock!

However, I am one of those strange outcasts who is still interested in shooting h264 with ALL-I frames.  Has any progress been made in getting GOP controls into the main build?

One big advantage of h264 ALL-I is that it utilizes the entire area of the sensor, so that the character of lenses designed for APS-C/S35 doesn't get obliterated by using a crop mode.

If it is not in the main build, instructions on where to get the code and how to compile it would be greatly appreciated.  I have installed the gcc-arm-none-eabi package on my Debian-derived distro, but I am a little rusty on compiling procedures.

As I understand, there is a 3x3 binned raw mode that allows the use of the full width of the sensor.  Is that correct?  If so, that might work, as long as there is no excessive aliasing/moire nor a pink dot problem.  From my scans of the threads, I gather that @dfort has made EOSM pink dot masks, but I am not sure how to apply them.

Thanks!
Logged

dfort

  • Guest
Re: Canon EOS M
« Reply #1424 on: April 23, 2018, 05:33:59 PM »
Hi @tupp

Setting up a development environment on Debian should be very similar to Ubuntu which can be used in the Windows 10 Linux subsystem and there's an entire topic devoted to that.

A few of us played around with the H.264 settings though I'm not sure if it will give you the ALL-I feature you're looking for.

Seems like there's more interest in raw which is a challenge on the EOSM because it defaults to mv720 mode which samples 3x5. The 3x3 raw mode you're referring to is by using the crop_rec module. Yes, you can use up to the full width of the sensor with that module but the vertical resolution is currently limited.

As far as the "pink dot" a.k.a. "focus pixels" most of the newer MLV apps can process them out automatically so that's no longer a big problem.
Logged
Pages: 1 ... 55 56 [57] 58 59 ... 75
« previous next »