Author Topic: Canon EOS M  (Read 1090749 times)

Danne

  • Contributor
  • Hero Member
  • *****
  • Posts: 6920
Re: Canon EOS M
« Reply #4400 on: September 18, 2020, 04:04:52 PM »
Enable zoomaid under customized buttons.

2blackbar

  • Senior
  • ****
  • Posts: 417
Re: Canon EOS M
« Reply #4401 on: September 18, 2020, 05:11:32 PM »
Thanks ! My memory is really bad these days

Danne

  • Contributor
  • Hero Member
  • *****
  • Posts: 6920
Re: Canon EOS M
« Reply #4402 on: September 18, 2020, 05:13:24 PM »
Well, in this build I disabled the function when installing ml. Otherwise default on.

theBilalFakhouri

  • Contributor
  • Hero Member
  • *****
  • Posts: 535
  • I am not active currently
Re: Canon EOS M
« Reply #4403 on: September 18, 2020, 06:21:21 PM »
New 1920x1280 mode is great, i had to do a bit of steps to get 1920x1080 working from 2.5k mode and it wasnt realtime preview but now it is , this new mode covers exactly my 1/2'' sensor CCTV lens area, its not centered perfectly but its a big improvement . .

Glad you liked it :), just re-worked on centering for 1920x1280p preset, the Preview is perfectly aligned to RAW data, but the RAW data wasn't centered on sensor, after re-working on it, there is still very little offset (can't be controlled, but also can be ignored), now it's better and more accurate, coming soon on EOS M.
700D 1.1.5 | no more ISOless LV err 8 / SDR104 @ 240 MHz - Constant! | Fixed Scrambled LiveView in Higher resolution | Real-Time correct framing in the Way

2blackbar

  • Senior
  • ****
  • Posts: 417
Re: Canon EOS M
« Reply #4404 on: September 18, 2020, 08:06:01 PM »
Great, in the past i had to make my own custom build cause i used different addresses to reframe it for my CCTV lens, 4-12mm , on 4mm it fit exactly in 1920x1080 without vignetting but it had to be perfect.But its not that a big deal in my case, i can zoom in a bit now.
Cause if ill fix this for my case, it might vignette for others, but no a lot of people test this out like me with cctv lenses and post here.
Here its a bit offside but on that full sensor view it is not that centered so it might be my cctv adapter, or canon sensor mount is not perfectly centered.
Here are my posts about it with more info and addresses, i documented these in case i lost my sourcecode with custom build, which actually happened when i had to update to new build:
https://www.magiclantern.fm/forum/index.php?topic=9741.msg222545#msg222545

https://www.magiclantern.fm/forum/index.php?topic=9741.msg222566#msg222566





Danne

  • Contributor
  • Hero Member
  • *****
  • Posts: 6920
Re: Canon EOS M
« Reply #4405 on: September 19, 2020, 09:36:35 AM »
New test build:
https://bitbucket.org/Dannephoto/magic-lantern_jip_hop_git/downloads/crop_rec_4k_mlv_snd_raw_only_2020Sep19.EOSM202_frtp.zip

Added theBilalFakhouri latest achievements from here. The preset list is growing ;).
https://www.magiclantern.fm/forum/index.php?topic=25323.msg231048#msg231048

I guess since we now hace 16:9, if added 2.39:1 and 2.35:1 we would have a real nice set up of ratios.
Adding maybe these two?
1464 x 1836 = 2.39:1
1464 x 1870 = 2.35:1

Grognard

  • New to the forum
  • *
  • Posts: 24
Re: Canon EOS M
« Reply #4406 on: September 19, 2020, 01:00:07 PM »
Amazing!
Yes it will be great to add these two. I Nevers use 16/9.

andy kh

  • Hero Member
  • *****
  • Posts: 534
Re: Canon EOS M
« Reply #4407 on: September 19, 2020, 05:07:36 PM »
5D Mark III - 70D

Anaconda_

  • New to the forum
  • *
  • Posts: 21
Re: Canon EOS M
« Reply #4408 on: September 20, 2020, 10:06:46 AM »
These new settings are really exciting, huge thanks to everyone involved!

Is post #1765 still going to be updated for the 'stable' builds? While other releases in other posts are tests?

Danne

  • Contributor
  • Hero Member
  • *****
  • Posts: 6920
Re: Canon EOS M
« Reply #4409 on: September 21, 2020, 03:54:18 PM »
New test build:
https://bitbucket.org/Dannephoto/magic-lantern_jip_hop_git/downloads/crop_rec_4k_mlv_snd_raw_only_2020Sep21.EOSM202_frtp.zip

- Added 2.35:1 anamorphic with real time preview

Epic preset coming from theBilalFakhouri.

BatchGordon

  • New to the forum
  • *
  • Posts: 2
Re: Canon EOS M
« Reply #4410 on: September 21, 2020, 07:57:30 PM »
Uhmmm... I'm getting some thin vertical stripes over the realtime preview in this newest anamorphic  2.35 AR, but only during recording.
Still a great job!

masc

  • Contributor
  • Hero Member
  • *****
  • Posts: 1677
Re: Canon EOS M
« Reply #4411 on: September 21, 2020, 11:23:04 PM »
That's indeed epic. Tried this mode: is it for you too continous at 14bit??? I get a green icon here... Awesome.
For the first test it crashed with this kind of console output. After that it worked nicely. Is it normal at the current dev stage, that the lower half of the screen does "anything"? Sometimes I get weird lines, or black white blinking, or a part of the last shown liveview image, or... any idea if it could be possible to make that just black for example?
Another finding: the histogram: while zabras already mark the overexposed highlights, the histogram shows 1..3EV space until overexposure. After a record, it fits again as it should.
But this RT liveview ... just wow!!! So much better than before!
5D3.113 | EOSM.202

Danne

  • Contributor
  • Hero Member
  • *****
  • Posts: 6920
Re: Canon EOS M
« Reply #4412 on: September 22, 2020, 06:06:45 AM »
I added cropmarks in Overlay section to match the "dead" parts of the preview.
Yes, development stages. Testing, testing.

masc

  • Contributor
  • Hero Member
  • *****
  • Posts: 1677
Re: Canon EOS M
« Reply #4413 on: September 22, 2020, 09:33:48 AM »
Thanks! I missed that one - works great, no more flickering in the lower part.
5D3.113 | EOSM.202

amitkattal

  • New to the forum
  • *
  • Posts: 12
Re: Canon EOS M
« Reply #4414 on: September 23, 2020, 07:51:52 AM »
The latest 2:35:1 mode is great. Can we have the hdmi option for it too like there was for 2.5k? That one worked very well

theBilalFakhouri

  • Contributor
  • Hero Member
  • *****
  • Posts: 535
  • I am not active currently
Re: Canon EOS M
« Reply #4415 on: September 23, 2020, 08:09:08 AM »
The latest 2:35:1 mode is great. Can we have the hdmi option for it too like there was for 2.5k? That one worked very well

HDMI support is coming soon for all real-time correct preview presets, and of course for the latest 2:35:1 anamorphic mode, glad you liked it :D
700D 1.1.5 | no more ISOless LV err 8 / SDR104 @ 240 MHz - Constant! | Fixed Scrambled LiveView in Higher resolution | Real-Time correct framing in the Way

Danne

  • Contributor
  • Hero Member
  • *****
  • Posts: 6920
Re: Canon EOS M
« Reply #4416 on: September 23, 2020, 08:28:26 AM »
HDMI support is coming soon for all real-time correct preview presets, and of course for the latest 2:35:1 anamorphic mode, glad you liked it :D
The best!

ZEEK

  • Senior
  • ****
  • Posts: 294
Re: Canon EOS M
« Reply #4417 on: September 23, 2020, 08:32:43 AM »
HDMI support is coming soon for all real-time correct preview presets, and of course for the latest 2:35:1 anamorphic mode, glad you liked it :D
Awesome stuff here 🎥🔥👍
EOS M - EOS M2 - 5D2

benoit

  • New to the forum
  • *
  • Posts: 27
Re: Canon EOS M
« Reply #4418 on: September 23, 2020, 09:30:14 AM »
Yes awesome stuff here !
Thanks theBilalFakhouri and Danne (the best code polisher ever !) and of course A1ex.
I 'm no more using my 5D2 ... with these releases !
Just a question, perhaps I 'm missing something : is there an option in "clear overlays" to hide white overlays (x5 box) without hide global draw ?
David

Danne

  • Contributor
  • Hero Member
  • *****
  • Posts: 6920
Re: Canon EOS M
« Reply #4419 on: September 23, 2020, 08:41:16 PM »
New test build:
https://bitbucket.org/Dannephoto/magic-lantern_jip_hop_git/downloads/crop_rec_4k_mlv_snd_raw_only_2020Sep23.EOSM202_frtp.zip

- Added connection to tap display preset section and ratios(2.39:1, 2.35:1, 16:9). 24fps only for now. Use matching cropmarks from Overlay section to blacken corrupt part of preview image. All thanks to thebilalFakhouri.

Needs testing and feedback. Mostly passed regs but don´t have time for extensive tests.



Teamsleepkid

  • Member
  • ***
  • Posts: 244
Re: Canon EOS M
« Reply #4420 on: September 24, 2020, 06:22:15 PM »
Awesome! Thanks for the mattes Danne. Much better than the flicker😎
EOS M

Danne

  • Contributor
  • Hero Member
  • *****
  • Posts: 6920
Re: Canon EOS M
« Reply #4421 on: September 24, 2020, 08:34:11 PM »
New test build:
https://bitbucket.org/Dannephoto/magic-lantern_jip_hop_git/downloads/crop_rec_4k_mlv_snd_raw_only_2020Sep24.EOSM202_frtp.zip

- Automated cropmarks when selecting anamorphic frtp preset. No need for mattes now :). Collab with theBilalFakhouri(who else  :P)

EDIT: Are these new presets cintinuous. Can´t find my sandisk extreme card so all code is done with a slow Ultra 80mb/s card.

masc

  • Contributor
  • Hero Member
  • *****
  • Posts: 1677
Re: Canon EOS M
« Reply #4422 on: September 24, 2020, 09:03:20 PM »
Nice! Tested especially the 2.35:1 5K anamorphic @14bit - it is continuous here and works great so far! Somewhere @theBilalFakhouri wrote for 700D, that we'll be able to zoom (focus aid) while recording... that sounds very interesting too! And do you see any chance to move the rt liveview some lines verticaly downwards? Is it possible to get larger resolutions in 5K ana when selecting 10bit?
5D3.113 | EOSM.202

Danne

  • Contributor
  • Hero Member
  • *****
  • Posts: 6920
Re: Canon EOS M
« Reply #4423 on: September 24, 2020, 09:17:20 PM »
expanding both height and width possible. What makes life a little more complex these days is when moving width you need to alter following regs accordingly to keep real time preview. not exactly done on a coffe break:
Code: [Select]
       EngDrvOutLV(0xC0F04210, 0x12E05A0);
        EngDrvOutLV(0xc0f11B9C, 0x72C059F);
        EngDrvOutLV(0xc0f1A00C, 0x72C059F);
        EngDrvOutLV(0xc0f118DC, 0x72C059F);
        EngDrvOutLV(0xc0f118E4, 0x72C059F);
        EngDrvOutLV(0xc0f11B8C, 0x8500BA);
        EngDrvOutLV(0xc0f11B90, 0x40333); /* Decrease Preview Moire*/
        EngDrvOutLV(0xc0f11BCC, 0x850160);
        EngDrvOutLV(0xc0f11BC8, 0x0);
        EngDrvOutLV(0xc0f11ACC, 0x8E0143);
        EngDrvOutLV(0xC0F3B0DC, 0x72C05EF);
        EngDrvOutLV(0xC0F3B074, 0x72C05F7);
        EngDrvOutLV(0xC0F3B070, 0x73205F7);
        EngDrvOutLV(0xC0F3B054, 0x73205A7);
        EngDrvOutLV(0xC0F3A0B0, 0x73605A8);
        EngDrvOutLV(0xC0F3A0A0, 0x73605AB);
        EngDrvOutLV(0xC0F3A04C, 0x732016D);
        EngDrvOutLV(0xC0F389EC, 0x16E0001);
        EngDrvOutLV(0xC0F389E4, 0x733016F);
        EngDrvOutLV(0xC0F389D4, 0x732016D);
        EngDrvOutLV(0xC0F389B4, 0x733016E);
        EngDrvOutLV(0xC0F389A4, 0x732016D);
        EngDrvOutLV(0xC0F38960, 0x7320000);
        EngDrvOutLV(0xC0F38934, 0x732016D);
        EngDrvOutLV(0xC0F380A4, 0x16F0000);
        EngDrvOutLV(0xC0F380A0, 0x16F0000);
        EngDrvOutLV(0xC0F38094, 0x7360000);
        EngDrvOutLV(0xC0F38084, 0x16F0000);
        EngDrvOutLV(0xC0F38080, 0x7330002);
        EngDrvOutLV(0xC0F3807C, 0x16D0000);
        EngDrvOutLV(0xC0F38078, 0x16E0001);
        EngDrvOutLV(0xC0F38070, 0x735016D);
        EngDrvOutLV(0xC0F383D4, 0x1b000c);
        EngDrvOutLV(0xC0F383DC, 0x743017a);
        EngDrvOutLV(0xC0F38024, 0x7420179);
        EngDrvOutLV(0xC0F42194, 0x16D);
        EngDrvOutLV(0xC0F4204C, 0x735016D);
        EngDrvOutLV(0xC0F42014, 0x735016D);

masc

  • Contributor
  • Hero Member
  • *****
  • Posts: 1677
Re: Canon EOS M
« Reply #4424 on: September 24, 2020, 09:22:58 PM »
 ;D Haha... just these few little registers?  :P   (UFF.)  :o
It's really great what you guys are doing here!
5D3.113 | EOSM.202