Author Topic: Canon EOS M  (Read 852720 times)

Danne

  • Contributor
  • Hero Member
  • *****
  • Posts: 5929
Re: Canon EOS M
« Reply #3575 on: October 09, 2019, 12:28:48 PM »
Centred but 14 fps? Or do you tweak fps and ratio from max mode?

AF-OFF

  • Freshman
  • **
  • Posts: 97
  • 50Dc EOSM
Re: Canon EOS M
« Reply #3576 on: October 09, 2019, 11:33:05 PM »
@Danne
I did put Your recent build in and tested the h264 @640x480 as suggested
Did push the canonmenu button several times, did a short recording and switched cam off to check the mov file. then I restarted and selected from canon menu back to hd 24fps and activated from ML menu the 5k ana-rew preset (I have the quick menu turned off)
then I've got this realtime preview at 12bit and 12fps , I did switch several times to framing and back and it worked. it was an undistorted, not streched and centered.

Outside I started the cam and the preview didnt work no more like that

Back home tried from memory to recreate , but failed
So I really don't know what happened

Did record at 1736x2996 12bit 12fps , no audio a 60GB file on my 64gb card, did render it out with MLV App which took 3 hours on my old mac and checked the file  which was without any bad frames. the 422 exported file is 56GB

Thanks!



mastapetz

  • New to the forum
  • *
  • Posts: 2
Re: Canon EOS M
« Reply #3577 on: October 10, 2019, 12:10:42 AM »
So, just to be sure:

that 2.0.2 Firmware that is mentioned here and in the install FAQ is meant for ALL EOS M models right?
Is this a custom one, already changed by someone of you or something original by Canon?

I ask, because when I check the canon page itself it lists the Firmware 1.1.0 of my M10 as the most recent one, according to other pages (canonwatch) there is an official one, and those link to an US Canon Page where there even is a 2.0.3 Firmware. 

Before I install anything, I want to be sure to be on the right page with everything.

Walter Schulz

  • Contributor
  • Hero Member
  • *****
  • Posts: 6874
Re: Canon EOS M
« Reply #3578 on: October 10, 2019, 07:24:01 AM »
There is no generic firmware for Canon cameras. A firmware fits exactly for the camera type it was designed to fit and nowhere else. ML project does not alter Canon firmware files.

An ML build for a camera fits exactly for that cam *and* a designated firmware version. If there is a new firmware version published you can't use ML created for the previous firmware version.

If we talk about "EOS M" this does *not* mean we talk about all cameras with an EF-M mount. From a programmer's viewpoint each cam type is unique.

And M10 won't be covered by ML project (highly unlikely) because it runs on code for the PowerShot series. Which is CHDK's area: https://chdk.fandom.com/wiki/M10
Photogs and videographers: Assist in proof reading upcoming in-camera help!. Your input is wanted and needed!

LittleBig M

  • New to the forum
  • *
  • Posts: 25
Re: Canon EOS M
« Reply #3579 on: October 11, 2019, 06:07:56 PM »
Just report crash....Nightly.2019Oct10.EOSM202
after restart   just crash
copy few crash log

ASSERT: !IS_ERROR( TryPostEvent( this->hTaskClass, this, EV_SETPARAM_INTERRUPT_EVF, NULL, 0 ) )
at ./Evf/EvfState.c:462, **INT-E0h**:1112c
lv:1 mode:3

PowerMgr stack: 27bfb0 [177340-176f40]
0x0009E558 @ 9e864:27bfb0

Magic Lantern version : Nightly.2019Oct10.EOSM202
Mercurial changeset   : 2cfdf6e80413 (crop_rec_4k_mlv_snd_raw_only) tip
Built on 2019-10-10 20:50:53 UTC by danne@danands-MBP.
Free Memory  : 229K + 2567K


2

ASSERT: !IS_ERROR( TryPostEvent( this->hTaskClass, this, EV_SETPARAM_INTERRUPT_EVF, NULL, 0 ) )
at ./Evf/EvfState.c:462, **INT-E0h**:1112c
lv:1 mode:3

PowerMgr stack: 27bfb0 [177340-176f40]
0x0009E558 @ 9e864:27bfb0

Magic Lantern version : Nightly.2019Oct10.EOSM202
Mercurial changeset   : 2cfdf6e80413 (crop_rec_4k_mlv_snd_raw_only) tip
Built on 2019-10-10 20:50:53 UTC by danne@danands-MBP.
Free Memory  : 229K + 2566K

before crash I film 4 clips 1080   


DeafEyeJedi

  • Hero Member
  • *****
  • Posts: 3324
  • 5D3 | M1 | 7D | 70D | SL1 | M2 | 50D
Canon EOS M
« Reply #3580 on: October 12, 2019, 07:02:27 AM »
In case you haven't been following the news, Sigma announced some new EF-M mount lenses:



All three primes will set you back about $1,000 or about 6x the cost of a used EOS M body.


Just sold my 16-35L II and will hold on to the $ for these EF-M Primes from Sigma once they’re out. Thanks for the heads up @dfort!
5D3.113 | 5D3.123 | EOSM.203 | 7D.203 | 70D.112 | 100D.101 | EOSM2.* | 50D.109

DeafEyeJedi

  • Hero Member
  • *****
  • Posts: 3324
  • 5D3 | M1 | 7D | 70D | SL1 | M2 | 50D
Re: Canon EOS M
« Reply #3581 on: October 12, 2019, 07:08:19 AM »
Grading directly on MLVApp (with wide-gamut) is much better than grading on FCPX. It's not a matter of opinion on this, it is just technically better.

Agreed. Spot on. Less is more.
5D3.113 | 5D3.123 | EOSM.203 | 7D.203 | 70D.112 | 100D.101 | EOSM2.* | 50D.109

DeafEyeJedi

  • Hero Member
  • *****
  • Posts: 3324
  • 5D3 | M1 | 7D | 70D | SL1 | M2 | 50D
Re: Canon EOS M
« Reply #3582 on: October 12, 2019, 07:11:50 AM »
Yeah, sounds strange with that slow exports. Turnlemons2lemonade. If you want cpu action copy mlv app four times on desktop than start these four apps to export at the same time.

Be sure to have a fire extinguisher ready just in case. ;)
5D3.113 | 5D3.123 | EOSM.203 | 7D.203 | 70D.112 | 100D.101 | EOSM2.* | 50D.109

zzzeosm

  • New to the forum
  • *
  • Posts: 2
Re: Canon EOS M
« Reply #3583 on: October 12, 2019, 07:14:37 AM »
when I use MLVApp to export 5Kf full sensor readout footage, the final exported file is just 1KB, does anyone meet this problem?

masc

  • Contributor
  • Hero Member
  • *****
  • Posts: 1377
Re: Canon EOS M
« Reply #3584 on: October 12, 2019, 08:14:40 PM »
when I use MLVApp to export 5Kf full sensor readout footage, the final exported file is just 1KB, does anyone meet this problem?
This is off-topic here. Post this in the MLVApp thread and describe what you did exactly.
5D2.212 | EOSM.202

turnlemons2lemonade

  • New to the forum
  • *
  • Posts: 16
Re: Canon EOS M
« Reply #3585 on: October 12, 2019, 08:23:38 PM »
Hey guys, did some more tests. It seems that when recording in 14bit RAW using MCM Rewire preset, with histogram turned off & lv peaking off & external monitor I still get dropped frames. HOWEVER, if I'm recording let's say a 30-60sec clip before and start recording after it seems to work. I mostly seem to get dropped frames on cold starts. Any other suggestion we can try?

DeafEyeJedi

  • Hero Member
  • *****
  • Posts: 3324
  • 5D3 | M1 | 7D | 70D | SL1 | M2 | 50D
Canon EOS M
« Reply #3586 on: October 12, 2019, 08:51:52 PM »
Interesting theory... I’ll give this a test run @turnlemons2lemonade!
5D3.113 | 5D3.123 | EOSM.203 | 7D.203 | 70D.112 | 100D.101 | EOSM2.* | 50D.109

ricardopt

  • Freshman
  • **
  • Posts: 89
Re: Canon EOS M
« Reply #3587 on: October 12, 2019, 08:53:05 PM »
Were the histogram and focus peaking from the magic lantern or the inbuilt monitor functions? Did you try with 12 or 10 bit?
Thanks for the tests.

ricardopt

  • Freshman
  • **
  • Posts: 89
Re: Canon EOS M
« Reply #3588 on: October 12, 2019, 08:56:35 PM »
was trying the 10/10/19 build and when using the shutter fine tuning function it displays in green "3.5k" when using the 5k preset, all the other modes are "identified" correctly.

Danne

  • Contributor
  • Hero Member
  • *****
  • Posts: 5929
Re: Canon EOS M
« Reply #3589 on: October 12, 2019, 09:19:53 PM »
5k rewired? The other 5k anamorphic is not recommended to use anymore.

ricardopt

  • Freshman
  • **
  • Posts: 89
Re: Canon EOS M
« Reply #3590 on: October 12, 2019, 09:30:06 PM »
i used the last one, will try the rewired one, thanks.

turnlemons2lemonade

  • New to the forum
  • *
  • Posts: 16
Re: Canon EOS M
« Reply #3591 on: October 13, 2019, 08:26:07 AM »
Were the histogram and focus peaking from the magic lantern or the inbuilt monitor functions? Did you try with 12 or 10 bit?
Thanks for the tests.

From the display menu. Yes I did, same results. 14/12/10 doesnt affect too much. I still get dropped frames using a external monitor most of the times.

lightspeed

  • New to the forum
  • *
  • Posts: 33
Re: Canon EOS M
« Reply #3592 on: October 13, 2019, 10:16:31 AM »
Why was the 11 - 8 bit removed? Its nice to have the option.

ricardopt

  • Freshman
  • **
  • Posts: 89
Re: Canon EOS M
« Reply #3593 on: October 13, 2019, 05:38:36 PM »
Why was the 11 - 8 bit removed? Its nice to have the option.

Were you powering the eos-m with the monitor using a dummy eos-m battery?

lightspeed

  • New to the forum
  • *
  • Posts: 33
Re: Canon EOS M
« Reply #3594 on: October 17, 2019, 06:44:32 AM »
just nice to have if you push the resolution a bit. I can usually get like 2.7k

turnlemons2lemonade

  • New to the forum
  • *
  • Posts: 16
Re: Canon EOS M
« Reply #3595 on: October 17, 2019, 10:20:49 PM »
Hey guys, just wanted to point out that the last video Zeek did on FPS Override fixed the dropped pink frames.

Here's the video:

Settings:
FPS Override: 24 FPS
Optimize for: Exact FPS
Shutter fine tune -1,26ms

BOOM, perfect 180 degree shutter, no pink frames. NOW LET'S SHOOT some cinematic 14bit RAW goodness with this beast.

ZEEK

  • Member
  • ***
  • Posts: 156
Re: Canon EOS M
« Reply #3596 on: October 18, 2019, 07:13:01 AM »
Ah man...... :o
Yes, fps override does work in holding the frames per second (fps) in place and it works perfectly on my Feelworld 4K Monitor and Eyeyoyo with no pink frames (they used to be unusable on the m. However, my Fotga produces a little bit, although much, much better than it used to be.

*For some reason the fps in the Canon Menu is adjusted to 25p strictly even upon setting it to 24p. It always reverts to 25p (not sure of the reason behind that. ::))

@turnlemons2lemonade have you tested the settings to see if they work for you? (your monitor, no corrupted frames?)
- make sure your camera also has sufficient battery life too and sd card space :)
EOS M - EOS M2

turnlemons2lemonade

  • New to the forum
  • *
  • Posts: 16
Re: Canon EOS M
« Reply #3597 on: October 18, 2019, 09:12:44 AM »
@Zeek yup, just did 4 1 minute long clips right now testing it out and no pinky frames. We're all good to go! Just bought another EOS M.

Pacerx999

  • New to the forum
  • *
  • Posts: 11
Re: Canon EOS M
« Reply #3598 on: October 18, 2019, 12:30:59 PM »
Interestingly, I've had no issues with an external monitor on the EOS M.

But I'm set to 25p in the Canon menu
And MCM review set to 14 bit, 25fps, 1/50 (for 180 shutter)

But without having to do any FPS override (as my experience has been the FPS override sometimes causes odd issues).


SO potentially, it is about the shutter being EXACTLY 180, that means there is a lack of pink frames with using external HDMI.

More testing, but it seems like a reasonable hypothesis.

ZEEK

  • Member
  • ***
  • Posts: 156
Re: Canon EOS M
« Reply #3599 on: October 18, 2019, 12:53:52 PM »
Interestingly, I've had no issues with an external monitor on the EOS M.

But I'm set to 25p in the Canon menu
And MCM review set to 14 bit, 25fps, 1/50 (for 180 shutter)

Does your monitor work with 5k Anamorphic Rewired or 2.5k Mode even with the 180 Degree rule? It would be good to know if it works as those modes are filled with pink frames when used with any monitor. MCM Rewire 1080 is all good with the 180 Degree Rule using Fine-Tuning. Cheers!
EOS M - EOS M2