Author Topic: Canon EOS M (Read 1163907 times)

gravitatemediagroup · « **Reply #3225 on:** August 09, 2019, 08:36:03 PM »

wow, that's a nice fix

Shame BMD never could in earlier cameras. lol although to be fair, there are other cinema cameras plagued with it.

Anaconda_ · « **Reply #3226 on:** August 09, 2019, 08:41:43 PM »

Hey all, I'm a relatively new user. Last time I had ML was on a 550d 6 years ago, and I must say, the M is really surprising me thanks to the hard work that's one into it. Thank you all so much!

I do have just one question though, is it possible to adjust aperture with the scroll wheel? At the moment, when I turn it, I'm changing the shutter speed, but ideally, I'd like to set that on one speed and leave it there forever (1/50) So the wheel could be put to better use on the aperture, which has more of a meaningful manipulation on your footage.

Hopefully I'm just missing the setting, but if not, Danne, is that something that could be added?

masc · « **Reply #3227 on:** August 09, 2019, 09:16:51 PM »

Yay... black sun behaviour is way better now. But something minor thing still happens. No problem to get it invisible, but anyway intersting: what happens here?! When lowering highlights I get a "pink sun" now. Lowering RAW White Level does not really help here - the pink is a little different from the "Pink highlights". (Just don't lower highlights and the pink sun is away again.) Here, a lamp, you see the little pink dot.

Danne · « **Reply #3228 on:** August 09, 2019, 09:28:17 PM »

Haha, always the pink.
Well maybe cmos 4 can be tweaked to fix even this?

henricusmaria · « **Reply #3229 on:** August 09, 2019, 09:37:29 PM »

Quote from: ngemu on August 09, 2019, 09:09:37 AM

Been using the mcm rewire mode but getting a ton of aliasing. I was told to use an anamorphic mode instead and I'm blow away. I ran the 2:39:1 script to help me select the settings and footage came out great.

Do you know what resolution / settings I can change to achieve footage like this though? (black bars on side rather than top and bottom)

That is my footage, missed your question on yt.. It is shot in 1.66:1, great aspect ratio imo..

rinski · « **Reply #3230 on:** August 10, 2019, 10:35:30 AM »

ello, I would like to ask for help I don't know how to fix the double split and flickering image on the back with 4k rewired 1120x1890 12 bits.

Danne · « **Reply #3231 on:** August 10, 2019, 11:36:00 AM »

Please do a recording of what you do. Description is not easy to understand.

rinski · « **Reply #3232 on:** August 10, 2019, 12:32:13 PM »

rinski · « **Reply #3233 on:** August 10, 2019, 12:41:37 PM »

Hi, I can't insert an image, only the upper half records me and the lower half is distorted and blinking.

Danne · « **Reply #3234 on:** August 10, 2019, 01:03:45 PM »

Sorry. Need more info. Maybe upload to dropbox or similar.

rinski · « **Reply #3235 on:** August 10, 2019, 01:55:30 PM »

rhhverde24verde@yahoo.com

Danne · « **Reply #3236 on:** August 10, 2019, 02:03:03 PM »

?
Look. Looking in my crystal ball. Do following:
1 - set RAW video to 14bit-lossless
2 - in Crop mode sub menu set 10bit.

rinski · « **Reply #3237 on:** August 10, 2019, 02:03:44 PM »

I'm a novice at this and find no other way to share the captures o the problem.
Thank you.

rinski · « **Reply #3238 on:** August 10, 2019, 02:13:13 PM »

Thank you so much.

ricardopt · « **Reply #3239 on:** August 10, 2019, 05:52:52 PM »

Quote from: ngemu on August 09, 2019, 09:09:37 AM

Do you know what resolution / settings I can change to achieve footage like this though? (black bars on side rather than top and bottom)

you can do it on your video editor, after exporting the video with MLVAPP load it into your video editor and then decrease the width of the video and the black bars will show up, tweak the width value to your liking.

henricusmaria · « **Reply #3240 on:** August 10, 2019, 06:07:54 PM »

Quote from: ricardopt on August 10, 2019, 05:52:52 PM

you can do it on your video editor, after exporting the video with MLVAPP load it into your video editor and then decrease the width of the video and the black bars will show up, tweak the width value to your liking.

Or you just shoot in 1.66:1

Anaconda_ · « **Reply #3241 on:** August 10, 2019, 06:11:06 PM »

How can I change aperture without going into the ML menus? The scroll wheel defaults to shutter speed, which I don't want to change. (my up and right buttons don't work which is annoying and probably the way to switch modes - if it is, can I reprogram which button can change aperture?)

ricardopt · « **Reply #3242 on:** August 10, 2019, 06:16:23 PM »

Quote from: henricusmaria on August 10, 2019, 06:07:54 PM

Or you just shoot in 1.66:1

Sorry for prolonging the off topic... the way i described offers more "room" to play with the width of the black bars.

henricusmaria · « **Reply #3243 on:** August 10, 2019, 06:25:36 PM »

Quote from: ricardopt on August 10, 2019, 06:16:23 PM

Sorry for prolonging the off topic... the way i described offers more "room" to play with the width of the black bars.

I just think it is (far) better to decide beforehand in what aspect ratio you will be filming. And not alter the image afterwards to make it more or less “cinematic”.

lightspeed · « **Reply #3244 on:** August 10, 2019, 09:40:24 PM »

Any way to fix the rolling shutter in 3k mode. Even if I set the resolution to 2500 x 1080 in 3k the rolling shutter is twice as bad as in 2.5k mode. would like to use 2.7k

ZEEK · « **Reply #3245 on:** August 11, 2019, 04:05:41 AM »

Quote from: Anaconda_ on August 10, 2019, 06:11:06 PM

How can I change aperture without going into the ML menus?

*Press the "info" button until the EOS M Dashboard Appears. Adjust the F-Stop from there on the right side of the Shutter Speed.

Danne · « **Reply #3246 on:** August 11, 2019, 09:29:53 AM »

Or just push right button once and you're in f-stop mode.

ZEEK · « **Reply #3247 on:** August 11, 2019, 09:59:24 AM »

This is what happens when you mess around with vintage lenses for "too long"

The latest builds are working nicely by the way on the M and can't believe how far this camera has come compared to the other ML Cameras out there. Haven't encountered any issues yet on the latest build, though will keep an eye out. Thanks a lot

Anaconda_ · « **Reply #3248 on:** August 11, 2019, 12:38:04 PM »

Quote from: Danne on August 11, 2019, 09:29:53 AM

Or just push right button once and you're in f-stop mode.

Thanks Danne, but as I noted, my up and right buttons aren't working. I guess I'll stick with the INFO route, at the expense of losing multiple LV presets.

Danne · « **Reply #3249 on:** August 11, 2019, 12:49:25 PM »

Push right then use scroll wheel. Works here.

News:

Author Topic: Canon EOS M (Read 1163907 times)