Tragic Lantern for EOS M

[gravitatemediagroup]

@gravitatemediagroup:
looks like they should get removed by pinkdotremover. have you used pdr and they're still there?

Yes, I used PDR with it's default settings, unless it's possible to do a 2nd pass?   

[mixer2]

can you send me a frame as dng? then i'll check why they don't get removed.

[maxotics]

Once the Magic Lantern hack and install become easier and more stable these EOS-M cameras may get a cult following like the GH2

Great work everyone who created the software I used to make these videos!  Thanks!

[350D]

Anyone, please, share complete file structure archive for EOS M ML ready to copy to sd card. My version doesn't work on my 2.0.2 camera.

[gravitatemediagroup]

Anyone, please, share complete file structure archive for EOS M ML ready to copy to sd card. My version doesn't work on my 2.0.2 camera.

keep trying, it's not that hard the instruction have been laid out 100 times already, follow them EXACTLY how it says and no issues.

[maxotics]

Anyone, please, share complete file structure archive for EOS M ML ready to copy to sd card. My version doesn't work on my 2.0.2 camera.

Email me at max at maxotics.com and I'll send you a zip. I placed the files to copy to the card before the EOScard write and the files to write after.  I think it works. 

[350D]

Email me at max at maxotics.com and I'll send you a zip.

Thank you!

[maxotics]

Need help from moderators.

It seems there isn't one easy place to get files for the EOS-M ML.  I could put them up on my maxotics.com site for easy download.  Don't know if that's okay, helpful?  Who would I talk to?  Don't know if it's okay that I've emailed the folder setup I created for the ML setup.  Please advise.  Thanks!

[Canon eos m]

Anyone, please, share complete file structure archive for EOS M ML ready to copy to sd card. My version doesn't work on my 2.0.2 camera.

Instructions cut and paste from Post #904:

There are 3 files to download from this thread (plus the EOSCard app).

[EOSM202] (need to rename to have .zip extension): https://bitbucket.org/OtherOnePercent/tragic-lantern-6d/downloads/%5BEOSM202%5D%20FirstVersion-NoInstaller.zip
UpDaterM.fir: http://www.qfpost.com/file/d?g=NzBmhwaBK
magiclantern-EOSM.106.Alpha1.zip: http://bit.ly/UP7Avg

So, here are the steps that I took, a slight modification along with correct links on Canon eos m instructions.

1. First soft format your SD card on your computer.
2. Then format the card on your EOS M. This will create the 'DCIM' and 'MISC' folders on the SD card.
3. Next download files from the bitbucket.org link (https://bitbucket.org/OtherOnePercent/tragic-lantern-6d/downloads/%5BEOSM202%5D%20FirstVersion-NoInstaller.zip) provided by 1% above on to your harddisk. Unzip the files and copy directly to your SD card.
4. Next copy the updaterM202.fir from (http://www.qfpost.com/file/d?g=NzBmhwaBK) on your SD card.
5. Open the EOSCard link from the installation section of the 5DMarkIII home page.
6. With the SD card in the card reader open the EOSCard utility.
7. Once in the EOSCard interface checkmark the 'EOS_Develop' and Bootdisk and press the big 'ML' icon and then press the 'save' icon on the top left of the EOSCard interface.
8. Then copy the ML directory from the Alpha 1 (http://bit.ly/UP7Avg) version (you can find this on the EOS M home page). Unzip and copy the 'ML' folder on the SD card. Then transfer the 'Modules' files that you got from the bitbucket.
9. Make sure not to use the autoexe.bin file from Alpha 1 but autoexe.bin file you got the bitbucket.org link. (step 3)

[vprocessing]

Hi to all !

One more THANKS for you guys creating such usefull tools !
You just impress me !
With Vitaly (personalview) and Rominator and other guys from netkas, you really help people to make nice videos, all over the world, as pro or as hobby ! Bunch of digital revoltionnaries you are !!!
You also push us to spend some extra time with computers…but that is for a good reason so…

First are you aware if a speed booster will be made for EOS M ?
http://www.canonwatch.com/is-metabones-working-on-a-speedbooster-for-eos-m/
Or lens turbo from China ?

Then the serious Magic Lantern Part :
I have those resolution available:
1344x406 Non crop
1344x672 Crop
It seems that people are usually talking of other sizes…Am I wrong

The Squeeze ?
I don't understand why the pics are squeezed…as we are working with square pixels…

The Framerate ?
People are talking about 24p RAW vids…I have 30fps…Can I have 24 or more usefull for me 25 ?

Quality seems bad when I shoot RAW do I missed something ?

Duration of display of ML menu can I set it longer somehow ? It desappears very fast…when you are on your first days of ML it is a bit short…

Audio off !!!!! Will you be working on a version with audio on and audio output like with the 5DMkII…Even if it is with Canon flat  video settings…

Intervallometer doesn"t work or can cause failing of the camera…black screen and Led flashing red or green, shutter clicks sometimes…

Sometimes ML menu are little Icons…sometimes it is pages…when I have Icones I don't have the 2 last menus (module loading and the previous one…)

The boot :
I have to make firmware update each time I turn on the cam to have ML…
Can it load directly ?
I'm ok with that because it is a good way to make ML or non-ML EOS-M with the same card…

I've been using 3 different cards :
- 1 SANDISK EXTREME HD video Class 10 30MB/S SDHC I
This one seems the best of the 3. I can have RAW recording working.

- 1 SANDISK EXTREME PRO SDHC I
45MB/S with a little 1 but it's not the same icon than the other's class 10…with the 10 circled…it is more like a U around the 1
With this one RAW recording stops after 2 or 3 sec.…If it is a class 1 I understand the problem…

- TRANSCEND SDHC Class 10
RAW recording stops also like with the 45MB/S

I'm on a 2.0.2 firmware.

THX for help !

.V

[maxotics]

Here's a video that takes you through setting up the camera to shoot RAW, after the SD card has been prepared with the EOS-M specific Magic Lantern software.  I also show my workflow from RAW to Sony Vegas Studio. 

SEE BELOW, you can now get EOS-M to boot with ML (use EOSM1202.fir)

[Escaperoute]

There are a lot of post about how to install ML on EOS M but what i want is that Alpha 1 bug like 18-55mm shutter don't work after installing ML remove.

It really annoying coz when i press the shutter with 18-55mm lens attach camera shutter just don't work like before.

1% please release a new version of ML.

[1%]

It still doesn't work with 2.02? I have to make a new bin but first want to fix installer boot process to handle 6D/M

[haomuch]

It still doesn't work with 2.02? I have to make a new bin but first want to fix installer boot process to handle 6D/M

Please also consider improve the magic zoom function as early as possible. The focus peaking is quick to use but not as reliable as magic room when comes to accuracy. If we don't have a good magic room function, it could be meaningless to use ML for normal photo taking.

[Escaperoute]

I'm not asking any ETA of the build. I'm very much greatful for your work 1% i really am. But i'm just want to shoot picture with my 18-55mm lens.

Anyway i'm not complaining but i just don't see anyone mention the problem so, i just thought i give it a go.

I'm gonna get 6D soon if i have enough money only because of amazing DEV like 1% is on the scene.

Thank u so much

[JohnBarlow]

Can someone up a pic of the card speed test with a 95MBs card?

[1%]

I can't check if the boot flag is set because I already have it:

http://www.qfpost.com/file/d?g=fb5V0T8Wj

Try it in photo mode, it does boot at least and shows the text.

[gamerblot]

I can't check if the boot flag is set because I already have it:

http://www.qfpost.com/file/d?g=fb5V0T8Wj

Try it in photo mode, it does boot at least and shows the text.

Hallelujah! 1% you the man!

It boots for me and the bootflag keeps. I can now turn off and on without losing ML and don't have to update the firmware every time like before.

The shutter release bug is also gone. I can now take pictures (and intervalometer and advanced bracketing) without having to turn it off and on again quickly though I had to turn it off and on once at least (the first time) for this to happen.

BTW, I do have a 18-55mm lens with a new EOS-M 2.02 (from factory).

[DanyoO]

I can't check if the boot flag is set because I already have it:

http://www.qfpost.com/file/d?g=fb5V0T8Wj

Try it in photo mode, it does boot at least and shows the text.

Thank You 1%

[mixer2]

@1%: sorry that i ask again, but i don't know if my question few days ago got read.
do you already know if dual iso may be possible on eos m? that it's working on 600d makes some hope, but since it doesn't work in lv...

[1%]

Its possible (and 600D has it in LV) but I get a hang when trying to log cmos, ADTG is fine... I tried today. Nanomad might know how to get it going, I think some address in memory has to be changed.

[mixer2]

oh... nice.
thx!

[htmlman]

I seem to have run into a problem.

My EOSM came with 2.0.2 factory installed. I downloaded the package from the link in the first post of this thread and then replaced the .FIR file with the one posted by 1% up above (at http://www.qfpost.com/file/d?g=fb5V0T8Wj) so it would work with 2.0.2, then followed standard installation procedures. All seemed to go well and the welcome screen came off. I restarted the camera and the welcome screen was still there so I restarted it again. It didn't start, and now whenever the power button is pressed, the card read light just rapidly blinks green and the camera does not turn on.

Is there something wrong with ML or did I do something stupid? And what (if anything) can I do to fix it? 

[1%]

Check:

Card is bootable
ML autoexec.bin + support files(ml folder from camera/nighlty) are there

Also boot the camera without a card after removing/installing battery.

[epyonxero]

Which button activates ML mode?