[deprecated] MLV Viewer to view .mlv (and .raw) files on windows (C#)

[g3gg0]

ARGH okay i found it.
shame on myself:

                            char fn[100];
                            snprintf(fn, sizeof(fn), "%s%06d.dng", output_filename, block_hdr.frameNumber);


forgot to clean up this quick hack.
redownload please

[Jakobmen]

ARGH okay i found it.
shame on myself:

                            char fn[100];
                            snprintf(fn, sizeof(fn), "%s%06d.dng", output_filename, block_hdr.frameNumber);


forgot to clean up this quick hack.
redownload please

Yahoo! it worked! thanks! now how do i deal with the thumbnails when they say "System.outof"

[g3gg0]

Yahoo! it worked! thanks! now how do i deal with the thumbnails when they say "System.outof"

System.OutOfMemoryException
this sounds like you have not enough RAM

[ted ramasola]

@g3gg0

tested dec 28 version to test extracting multiple files.
I ctrl+selected 7 files, then right clicked to extract dng + wav. Selected directory to extract to then conversion progress window opens to show the progress of 7 files. All indicated success, but in target folder window only 1st file extracted.

Attached screenshot showing the windows.

[g3gg0]

try yesterdays version please.

[Francis Frenkel]

try yesterdays version please.

Where could I find "yesterday one" ?

 Like ted ramasola when I choose " export selected file as DNG+ wave" with a mlv file it works fine, but when I try it with a RAW file I only have one RAW file of 4k and no DNG files

Here is the Log file :
Exec: 'mlv_dump.exe --batch --dng -v -o "F:\efface\M12-1226.RAW.frame_" "I:\Lingor\Plans 02\DCIM\100EOS5D\M12-1226.RAW"'
 MLV Dumper v1.0
-----------------
Mode of operation:
   - Input MLV file: 'I:\Lingor\Plans 02\DCIM\100EOS5D\M12-1226.RAW'
   - Verbose messages
   - Convert to DNG frames
   - Output into 'F:\efface\M12-1226.RAW.frame_'
File I:\Lingor\Plans 02\DCIM\100EOS5D\M12-1226.RAW opened
Processing...
Block: ”(²Â
  Offset: 0x00000000
    Size: 1277724940
    Time: 2936360571865995.500000 ms
Unknown Block: ”(²Â, skipping
Block: vÐ
  Offset: 0x4c28890c
    Size: 7690013
    Time: 8516620377627640.000000 ms
Unknown Block: vÐ, skipping
Block: 3Ñí
  Offset: 0x4c9de029
    Size: 1360143156
    Time: 8328102807490409.000000 ms
Unknown Block: 3Ñí, skipping
Block: ó/ò
  Offset: 0x9db0035d
    Size: 318963768
    Time: 3454348803487778.000000 ms
Unknown Block: ó/ò, skipping
Block: ÜÅs&
  Offset: 0xb0b30395
    Size: -214137654
    Time: 14531040172131272.000000 ms
Unknown Block: ÜÅs&, skipping
Reached end of chunk 1/1 after 5 blocks
Processed 0 video frames
Done

[RenatoPhoto]

try yesterdays version please.

I downloaded latest MLVViewSharp and now it handles multiple mlv files to the same directory.

[g3gg0]

Where could I find "yesterday one" ?

 Like ted ramasola when I choose " export selected file as DNG+ wave" with a mlv file it works fine, but when I try it with a RAW file I only have one RAW file of 4k and no DNG files

1. download link is in the first post
2. it is only working with .mlv files

[ted ramasola]

ok. confirmed dec 29 version now works for multiple clips.

[legreve]

Just downloaded the OSx app… it doesn't even start up when clicked.
I also tried dumping the mlv file on the program icon but nothing.

Any tips?

[Danne]

You tried this one?
http://www.magiclantern.fm/forum/index.php?topic=9731.msg93741;topicseen#msg93741

[RenatoPhoto]

I cannot figure out why MLVBrowseSharp.exe exports dng files (green cast) with wrong White Balance information.  Basically when I import the dng into ACR the Temperature Slider is all the way to the left (2000) and the Tint is always to the left (-150).  Also my dng thumbnails have the green cast.

MLVViewSharp.exe plays then correctly and show the WB at 5200.

MLVBrowseSharp.exe exports as wav and RAW and then I use raw2dng to export the dngs then all dngs are correct and ACR imports the Temperature and the Tint correctly.

I use windows 7 64 bit, Adobe Camera RAW 8.2, and  FastPictureViewer Codec Pack which provides the codec to windows for thumbnails and incorporates dng view to the windows viewer.

[Danne]

I get exact same whitebalance settings as renatophoto, 2000, -150. I, m on adobe cs6

[g3gg0]

yeah i already noticed, mlv_dump is setting camera's wbgain information.
maybe i should just undo that for now.

[bumkicho]

g3gg0,

would it be possible for MLVBrowseSharp to export multiple mlv files to multiple sub-folders?

Thank you for sharing your work!!

[RenatoPhoto]

yeah i already noticed, mlv_dump is setting camera's wbgain information.
maybe i should just undo that for now.

I noticed that this information is not sent to ACR via exif tags.  I assume if wb was sent in exif tag then it should be read by ACR.  Also noticed that raw2dng is not sending wb via exif so it uses another method which is embed in the dng.

[g3gg0]

updated disabled wbgain handling, please try again

[g3gg0]

g3gg0,

would it be possible for MLVBrowseSharp to export multiple mlv files to multiple sub-folders?

Thank you for sharing your work!!

well, you should be able to select them easily as the names start with the original file name.

[RenatoPhoto]

updated disabled wbgain handling, please try again

I compiled new mlv_dump.exe and used it with MLBrowser and dng look good!

[bumkicho]

well, you should be able to select them easily as the names start with the original file name.

I know it's a little thing, but more often than not, these little things make the program so much better, so I thought I'd just ask.

Thanks again for sharing your work with us.

[gary2013]

I am getting all green cast when extracting mlv to dng using the browser and a right click on the mlv. I can quickly get rid of the green using ACR in PS CC, but that takes a lot of extra time and steps and it has to go tif. I wanted to go from dng straight to PPro CC timeline like I used to do with the simple mlv2dng.exe. Why is there a green overlay on the raw mlv using the mlv browser app?

[g3gg0]

I am getting all green cast when extracting mlv to dng using the browser and a right click on the mlv. I can quickly get rid of the green using ACR in PS CC, but that takes a lot of extra time and steps and it has to go tif. I wanted to go from dng straight to PPro CC timeline like I used to do with the simple mlv2dng.exe. Why is there a green overlay on the raw mlv using the mlv browser app?

did you try the version from today?

[gary2013]

did you try the version from today?

I am not sure. Please give me a direct link to its download and I will bookmark that for future downloads if that is where they all appear. I briefly looked at this app before and now I started to look closer at it since MLV is working pretty good on my M. 
 
Thank you,
Gary.

[bumkicho]

I am not sure. Please give me a direct link to its download and I will bookmark that for future downloads if that is where they all appear. I briefly looked at this app before and now I started to look closer at it since MLV is working pretty good on my M. 
 
Thank you,
Gary.

First post of the thread has all the direct links (in big bold font) you need.

[gary2013]

First post of the thread has all the direct links (in big bold font) you need.

Got it now. Thanx.