7D Raw Thread

Started by noisyboy, August 05, 2013, 11:52:15 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

arrinkiiii

Quote from: Thomas Worth on September 19, 2013, 02:23:22 AM
At the moment, yes. I have a CLI version that runs on Windows, but no GUI yet.

It would be nice having for windows  :D

mdwhaley

with the [7d]PopStop version I cannot remove ML from the camera, any ideas?

mucher

I am using Britom's Sep 10 build from the repo (which has playback RAW video function in the RawVideo submenu), when I shoot RAW video, pressing the Zoom-in Key ( the "+" key) will make the camera freeze.

1%

Quotewith the [7d]PopStop version I cannot remove ML from the camera, any ideas?

Run boot off fir if you want no boot flag. You don't *have* to autoboot if you're a glutton for button pressing.

Quotewhen I shoot RAW video, pressing the Zoom-in Key ( the "+" key) will make the camera freeze.

10x yuv is broken. You have to press play to go back to 1x. You can record in the frozen zoom too without issue (except no preview).

mucher

Quote from: 1% on September 19, 2013, 04:38:47 PM
Run boot off fir if you want no boot flag. You don't *have* to autoboot if you're a glutton for button pressing.

10x yuv is broken. You have to press play to go back to 1x. You can record in the frozen zoom too without issue (except no preview).

I think what I mean was that pressing the zoom key while recording RAW video, the camera showed an ERR message on the shoulder screen and then freezed and crashed. Please excuse my bad English.

RenatoPhoto

Quote from: mucher on September 19, 2013, 05:12:30 PM
I think what I mean was that pressing the zoom key while recording RAW video, the camera showed an ERR message on the shoulder screen and then freezed and crashed. Please excuse my bad English.
This zoom while recording function is not supported.  Dont do it!
http://www.pululahuahostal.com  |  EF 300 f/4, EF 100-400 L, EF 180 L, EF-S 10-22, Samyang 14mm, Sigma 28mm EX DG, Sigma 8mm 1:3.5 EX DG, EF 50mm 1:1.8 II, EF 1.4X II, Kenko C-AF 2X

mdwhaley

Quote from: 1% on September 19, 2013, 04:38:47 PM
Run boot off fir if you want no boot flag. You don't *have* to autoboot if you're a glutton for button pressing.

10x yuv is broken. You have to press play to go back to 1x. You can record in the frozen zoom too without issue (except no preview).

Thanks, I guess what I meant was boot flag cannot be disabled in camera via firmware update, it just goes to sensor cleaning screen and everything is still there. No biggie.

Stallman

Hello,

New in RAW video ML on 7D,  i tried pelican build and it's a jowerly, thanks guys!
i've just a little problem , i wonder why  in my .mov i 've  a big horizontal white stripe ?.
I tried all resolutions.

Thanks you

arrinkiiii


Horizontal white strip only in h.246 video? In raw don't show up this?

mrnv45

how can i record audio while filming?


just put alpha 2 on and tested low light. 1344x560 i believe. force 18fps 2:3 crop.

Camera<Memory card<RAWMagic<Lightroom (edit - export into full res Adobe .jpg<FCPx<change duration to 1, consolidate clips<touch up more<export to youtube

this is a single fireplace light in the apartment. dont remember everything but i believe it was 800 iso..dont remember shutter or Aperture.

did diff kinda grades and clean ups.  some have a fuzzyish ring still in dark and bright spots.. any way to remove?

here is a sample..


shot at 1728 x 1152 on a canon 7d with 24-105 Lens what would i set my crop to i was using 2:3 and it has error code 6.  if i use the 1344 like i was i can run continuous for atleast 30 sec-1min (that ive tested) forced 24fps following this TUT.

http://www.youtube.com/watch?v=WhiQ9D9vyPI

here is a sample daylight and rain..

shot at 1/100 and f/7-9 iso 250-800 depending on lighting or theme.. tried some low light on the bridge too.. enjoy

Camera<Memory card<RAWMagic<Lightroom ( NO EDIT  - export into full res Adobe .jpg <FCPx<make project 1280x720 at 24fps<change duration to 1, consolidate clips<color touch ups a little sharpen around 2-5.0<export to youtube ... i feel vimeo captures the true resolution cause we all know youtube is garbage but its more known)




Using:

12/09/2013
► 1% Build updated to commit f9bec4d (https://bitbucket.org/OtherOnePercent/tragic-lantern-6d/commits/all)
Includes a signed .fir version where you can use fps override and video hacks that can be booted via firmware update. (Does not modify your camera.)

From:
http://www.magiclantern.fm/forum/index.php?topic=7987.0

1%

I need to sign a new fir after all these changes but exfat? Is it working for anyone?

http://www.magiclantern.fm/forum/index.php?topic=8408.new#new

Thomas Worth

1%, I enabled FPS override for the 7D by commenting out #undef FEATURE_FPS_OVERRIDE in /platform/7D.203/features.h. I now have the FPS override menu, but no matter what I set it to the data rate remains the same when shooting in crop mode. In other words, reducing the frame rate doesn't seem to reduce the amount of data being written. Is it simply being ignored? Is there something else that needs to be done?

Stallman

Quote from: arrinkiiii on September 19, 2013, 06:48:41 PM
Horizontal white strip only in h.246 video? In raw don't show up this?

i got it after i put my file .RAW in raw to dng. It give me a .mov file which has a white large stripe.
does the .MOV is  h.264 after processing in raw to dng ?

Thanks you


20thdc

May I ask and know why we're not included in this build?

http://builds.magiclantern.fm/#/

I've been reading majority all the Moderators, Developers, Contributors, Administrator and the community on this forum regarding RAW and the new MLV format, seems we've been left behind?
Please excuse my ignorance, I'm just a peasant....

arrinkiiii

Quote from: Stallman on September 20, 2013, 09:05:37 AM
i got it after i put my file .RAW in raw to dng. It give me a .mov file which has a white large stripe.
does the .MOV is  h.264 after processing in raw to dng ?

Thanks you

raw2dng (like the name say) give's u dng's, will never give u mov files.


http://www.magiclantern.fm/forum/index.php?topic=7464.0

http://www.magiclantern.fm/forum/index.php?topic=7987

arrinkiiii

Quote from: 20thdc on September 20, 2013, 09:42:40 AM
May I ask and know why we're not included in this build?

http://builds.magiclantern.fm/#/

I've been reading majority all the Moderators, Developers, Contributors, Administrator and the community on this forum regarding RAW and the new MLV format, seems we've been left behind?
Please excuse my ignorance, I'm just a peasant....

If u got everything install good, in the module menu you must load the mlv or the raw module (just one) and then you will have mlv file or raw file.


http://www.magiclantern.fm/forum/index.php?topic=7987


mucher

Btw, is there a MLV 2 CDNG Windows software? AE's processing speed for DNG is anguishing.

Stallman

Quote from: arrinkiiii on September 20, 2013, 10:24:34 AM
raw2dng (like the name say) give's u dng's, will never give u mov files.

I took a screenshot, in output i've all dng files in a folder and a .mov file.




LEVISDAVIS

Awesome find Thomas Worth with the vertical resolution testing. That's almost like raising the bit depth of the recording from a 12-bit (technically a 14 bit) to a true 14-bit image level. Seems like you're getting everything out of the picture. Thanks very much for taking this into account!
Levi S. Davis

Idir75

Hello everyone, what is the latest stable version for the 7D raw please?

I know that stability is relative .... :)


thank you

20thdc

Quote from: arrinkiiii on September 20, 2013, 10:25:54 AM
If u got everything install good, in the module menu you must load the mlv or the raw module (just one) and then you will have mlv file or raw file.


http://www.magiclantern.fm/forum/index.php?topic=7987



Thank you arrinkiiii,
I've been testing all the modules you've provided on the link, since Pelican Compiled the module

Why not ours on this link?
http://builds.magiclantern.fm/#/

Quote from: Pelican on August 10, 2013, 05:47:06 PM
Now I've compiled ML and raw_rec but can't really use...

[ MODULE   ]   raw_rec.mo
[ STRIP    ]   raw_rec.mo
[ EXPORTS  ]   raw_rec.sym
[ DEPENDS  ]   raw_rec.dep
Will load on:
    500D, 50D, 550D, 5D2, 5D3, 600D, 60D, 7D



Quote from: mucher on September 20, 2013, 10:58:43 AM
Btw, is there a MLV 2 CDNG Windows software? AE's processing speed for DNG is anguishing.

As the moment I'm following their progress on this link
http://www.magiclantern.fm/forum/index.php?topic=7802.0

Quote from: Stallman on September 20, 2013, 09:05:37 AM
i got it after i put my file .RAW in raw to dng. It give me a .mov file which has a white large stripe.
does the .MOV is  h.264 after processing in raw to dng ?

Thanks you

It will give you .mov(to preview your clips) and dng after using the application.
I recommend using RawMagic(Thomas Worth is working for the new update) to process Raw Format and for the MLV Format this link from nick.p (Reply #34)
http://www.magiclantern.fm/forum/index.php?topic=7802.25

Quote from: Idir75 on September 20, 2013, 11:52:55 AM
Hello everyone, what is the latest stable version for the 7D raw please?

I know that stability is relative .... :)


thank you

None at the moment, but you can test the latest module here
http://www.magiclantern.fm/forum/index.php?topic=7987

arrinkiiii

Quote from: Stallman on September 20, 2013, 11:04:44 AM
I took a screenshot, in output i've all dng files in a folder and a .mov file.



OK, you are using mac... i just use raw2dng for windows on command line. Wish that Thomas Worth make is app to windows =))

redrrum

Hi,

Thank you everybody for the amazing work with ML and 7D and also for all the help available in this thread.

My 64GB 1000x Komputerbay CF arrived few days back and I was able to get %1's latest build installed and working with first try. I was a bit sceptical about Komputerbay after reading about a few bad experiences, but after readig about their good customer support and that one guy who ordered 8 (?) cards and not a single one was dud, I decided to give it a go.



I'm not sure if my settings for the benchmark are right, but apparently the speeds could be worse. Also, after few quick tests I'm able to record continuously at 1728x972.

As for my first application, I've had this forever project to archive some old family super-8 films by filming the frames directly as they pass the film gate of an 8mm projector, with a DSLR and a macro lens. Poor man's telecine. After trying out a few combos of extension rings, objectives and macro conversion lenses, I found a good one that would give me the 8mm frame magnified to fill the 7D's sensor. After some tests with stock 7D and h264 I thought the quality was good if a bit muddy. Here's a framegrab from the .MOV file:



Around the time I was making these tests, I heard the news about ML RAW for 7D. I thought that RAW might make a big difference since the graininess of the 8mm film is probably difficult for the h264 encoding, and the video I was getting was not quite as sharp I had hoped. After installing ML I telecined a short clip and was blown away by the result. Not only can I now actually see the grain, but the ability to properly adjust the colors and even the exposure makes all the difference. Here's a frame grab (DNG) from the RAW video:



I've adjusted the colors a bit and applied some sharpening without too much thought, not necessarily the best settings.. Both are a bit scaled down, the original cropped-to-film-area DNG is 1172x981. The h264 frame looks so bad I've started to wonder if the camera was out of focus, though some high-contrast details look as sharp as on the RAW version.

The project is not complete, I've still got to figure out how to sync the projector and 7D framerates, but I've got some ideas, and now after trying ML RAW I'm sure it's going to be worth the effort.

Anyways, just wanted to check in and give thanks, good work!

juantamad

Gooday! everyone, I miss you all. Did I miss anything special..........WOW! already this long page.
Anyway, just finished testing the latest build from 1%, THANK YOU again for the contribution you've shared to us.
While we're waiting for the greatest build coming-up, I made something to relax. Feel free to comment.

arrinkiiii