7D Raw Thread

[arrinkiiii]

Has someone tested ETTR in this build? No luck on my side of the screen.
Proper bug report will follow.

Ciao, Walter

With this last build i haven't try yet. But in the build before it works.

[stevelucky]

I've got an updated 7D build here:  https://www.dropbox.com/sh/6k0bh72mbb52fsi/k2Nx-hV2Aa

I get a lockup when I try to load any of the modules in this latest build. It locks up on the "Scanning modules..." screen. I have to remove the battery to get the screen to go away. Just turning off the camera doesn't do it. Does anyone else experience that?

[arrinkiiii]

I get a lockup when I try to load any of the modules in this latest build. It locks up on the "Scanning modules..." screen. I have to remove the battery to get the screen to go away. Just turning off the camera doesn't do it. Does anyone else experience that?

This happen with me one time wend i try to load 2 times the modules... saying something like "modules already loaded" and this small box never go's way.

[stevelucky]

This happen with me one time wend i try to load 2 times the modules... saying something like "modules already loaded" and this small box never go's way.

I've done a little more testing by disabling all the modules and loading them one at a time and here's what I'm getting:

When I try to load dual_iso i get an error that says:
"tcc: error: undefined symbol 'file_prefix_set'
"tcc: error: undefined symbol 'file_prefix_reset'
[E] failed to link modules"

When I try to load file_man I get:
"Load modules...
load: FILE_MAN.MO
Linking..."
And it just stays on that screen and I have to remove the battery to get it to go away.

When I try to load ettr I get locked on the "Scanning modules..." screen and I have to remove the battery to get it to go away.

I can successfully load pic_view but it doesn't seem to function. I have DNG images that I acquired through shooting burst but it still says no image when I try to view them with the pic_view module loaded.

[arrinkiiii]

@stevelucky

Im going install the last build for see what happens with the modules.

[jemabaris]

@stevelucky

Im going install the last build for see what happens with the modules.

Everything works fine here

[Walter Schulz]

Everything works fine here

ETTR works as intended?

Ciao, Walter

[stevelucky]

Everything works fine here

Hmmm. Okay, maybe it's just me.  I'm not sure what I can do differently though....

[yavaro]

Test Canon 7D Raw - crop mode - Magic Lantern - Handheld + sharp + VSCO

@ crop mode I only get 35 frames... not so fast card...

[jemabaris]

ETTR works as intended?

Ciao, Walter

ETTR works like are charm if not even better and faster than before^^ btw are you german, Walter?

[Walter Schulz]

ETTR works like are charm if not even better and faster than before^^

Good for you! I will install ML from scratch on a second card and hope for the best.

btw are you german, Walter?

Yes, why?

Ciao, Walter

[jemabaris]

So am I

[arrinkiiii]

Every thing is working good with the last build, but the pic view modulo don't work.

-ETTR i think just work in photo mode with LiveView on. You push the SET button and he make the auto ETTR, then you just need to shoot. Silent burst or raw photo. ETTR just work with RAW.

-Pic View modulo don't work, at least for me. 


Silent Pic Burst

Normal= 41 frames
Zoom 5x= 35 frames

Sandisk Extreme
60MB/s 
8GB

[jemabaris]

Every thing is working good with the last build, but the pic view modulo don't work.

-ETTR i think just work in photo mode with LiveView on. You push the SET button and he make the auto ETTR, then you just need to shoot. Silent burst or raw photo. ETTR just work with RAW.

-Pic View modulo don't work, at least for me. 

Also, ETTR only works in M with a fixed ISO... (just choose any, it will be changed anyway)

Pic view also works perfectly fine for me.

[Walter Schulz]

Installed ML on another card and ETTR works just fine.

Deleted MAGIC.CFG from first one (installed yesterday, updated today) and it works, too.

May I suggest to the people having troubles with todays build (after updating) to move MAGIC.CFG from SETTINGS (or to rename it) and to try again?

Ciao, Walter

[Pelican]

Probably there are different versions of modules and somebody uses one version of the module another one uses another version.
Maybe it's time to mark the modules with version number or date or something to make it recognizable/distinguishable.

[arrinkiiii]

Probably there are different versions of modules and somebody uses one version of the module another one uses another version.
Maybe it's time to mark the modules with version number or date or something to make it recognizable/distinguishable.

Yes, it would be more easy.

I can't manage work with the pic_view modulo 

[jemabaris]

I can't manage work with the pic_view modulo 

Since the latest build is working 100% try the following:

Format your CF card with your PC to NTFS. Put it back in your camera and format it again.
Then paste all the files from the latest release to it. the "autoexec.bin" to the root all other fils to "magiclantern/modules".
Boot up your camera, go to the modules tab and enable autoload modules. switch your camera off and back on.


Take a DNG seequence with silent picture.

Then go to File Manager under the "Debug" tab. Navigate to   DCIM/100EOS7D/and there are your DNG files. press set and then "view" to get a grey scale preview.

Good luck

[arrinkiiii]

@jemabaris

I almost call to the ML Hot-Line 0800-754-754     but with this explanation... 

THANK YOU jemabaris  didn't knew that for see the dng's you need to go to Debug tab for see the pictures. I just carried on the play/review button on camera and nothing happen. Now i know how to see the dng's, in gray scale.

More one time, thank you for you time and explanation 

[MaxK7D]

How long should I expect (Recording... Remaining images :1) to take it has been about 20min so far?

[jemabaris]

How long should I expect (Recording... Remaining images :1) to take it has been about 20min so far?

I have no idea what you are talking about, haha. But there is no process lasting 20 minutes.. Probably something stuck or froze^^

[MaxK7D]

Ok thanks just pulled the battery out

[stevelucky]

Since the latest build is working 100% try the following:

Format your CF card with your PC to NTFS. Put it back in your camera and format it again.
Then paste all the files from the latest release to it. the "autoexec.bin" to the root all other fils to "magiclantern/modules".
Boot up your camera, go to the modules tab and enable autoload modules. switch your camera off and back on.

This fixed all my issues. All my modules are loading great now. Thanks!

[LEVISDAVIS]

... How well does the 7D hold up when shooting raw with a Mosaic Engineering anti-aliasing filter? Starting to think that this would be an excellent combination for production work. Any testers out there?

[arrinkiiii]

... How well does the 7D hold up when shooting raw with a Mosaic Engineering anti-aliasing filter? Starting to think that this would be an excellent combination for production work. Any testers out there?

I got the same question, if the Mosaic Engineering filter going to work good with raw... or is just good  for the 1080p h.264 ?