Canon 650D / T4i

Started by nanomad, August 03, 2013, 07:27:52 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

nanomad

EOS 1100D | EOS 650 (No, I didn't forget the D) | Ye Olde Canon EF Lenses ('87): 50 f/1.8 - 28 f/2.8 - 70-210 f/4 | EF-S 18-55 f/3.5-5.6 | Metz 36 AF-5

delorossa

Quote from: nanomad on September 26, 2013, 09:37:02 PM
Correct

But why can i not take or use first the 128GB Card or only the 128GB Card???

papkee

Alright guys, the RAW tests are being shot next week, along with many other ML feature tests.

In the meantime, here's a quick showreel of mine, with almost every clip in it being aided by ML in some way. All clips were shot on the 650D with either a 50mm 1.8 or an 18-135mm 3.5-5.6.



Enjoy.
EOS 650D, a bunch of random lenses & adapters

NikeFreak

последняя сборка ML_N_18.09.2013.zip ? новее больше не выходило?
last assembly ML_N_18.09.2013.zip? is newer didn't leave any more?
6D ML + Sigma 24-70mm F2.8 + Canon 70-200mm F2.8L IS II + Canon 50mm F1.8 STM + Zenitar 16mm F2.8 + Canon SpeedLite 430EX II
650D ML + Canon 18-135mm F3.5-5.6 STM + Helios 44-2 58mm F2.0
500D ML + Canon 55-250mm F4-5.6 IS II + Canon 18-55 mm F3.5-5.6 IS


newsense

Quote from: papkee on September 27, 2013, 04:00:33 AM
Alright guys, the RAW tests are being shot next week, along with many other ML feature tests.

In the meantime, here's a quick showreel of mine, with almost every clip in it being aided by ML in some way. All clips were shot on the 650D with either a 50mm 1.8 or an 18-135mm 3.5-5.6.



Enjoy.

Nice video. You seem pretty familiar with ML. I have a question I have asked a few times but nobody can answer it, maybe you can help me. I am using ML digital iso with a setting of -0.3 so I can gain access to native iso's like 160. The problem is the histogram no longer gives the clip warnings and zebras do not work. I was told I need to change threshold settings but I am not sure what to set them to. If you can answer that it would be great, thanks.

guillegar

I though I already replied but I didn't:

Thank you!  :)

NikeFreak

нашел ошибку в Built on: 2013-09-27 04:55:09 +0400, при выборе "спуск затвора без карты памяти" не фотографирует, хотя карта на месте.

I found a mistake in Built on: 2013-09-27 04:55:09 +0400, at choice "lock descent without a memory card" doesn't photograph, though the card on a place.
6D ML + Sigma 24-70mm F2.8 + Canon 70-200mm F2.8L IS II + Canon 50mm F1.8 STM + Zenitar 16mm F2.8 + Canon SpeedLite 430EX II
650D ML + Canon 18-135mm F3.5-5.6 STM + Helios 44-2 58mm F2.0
500D ML + Canon 55-250mm F4-5.6 IS II + Canon 18-55 mm F3.5-5.6 IS

papkee

Quote from: newsense on September 27, 2013, 06:57:06 PM
Nice video. You seem pretty familiar with ML. I have a question I have asked a few times but nobody can answer it, maybe you can help me. I am using ML digital iso with a setting of -0.3 so I can gain access to native iso's like 160. The problem is the histogram no longer gives the clip warnings and zebras do not work. I was told I need to change threshold settings but I am not sure what to set them to. If you can answer that it would be great, thanks.

I've not had any trouble using Zebras with ML's custom ISOs. I'm not sure what the setting of -0.3 is, as my build of ML has the native ISO values in it by default. If I had my camera with me at the moment I'd try and figure something out, but I'm at work at the moment.
EOS 650D, a bunch of random lenses & adapters

a1ex

Measure the brightest point with the spotmeter and set the overexposure threshold just a little lower.

oli650d

bonjour il n"y as pas de mise a jour depuis 10 jours ?
Eos m , Eos 70d canon 18-135 STM :canon 50mm f1.8 : tamron  SP 70-300 f4/5.6 VC : SD eye-fi 4Go/Sandisk extreme pro 95mb/s 8Go:flash yongnuo YN565EX / YN560 II: tube extention macro 31;21;13mm : tamron SP 90mm DI f2.8:sigma 17-50 ex f2.8: efm 22mm...70D.111A

spider


oli650d

Eos m , Eos 70d canon 18-135 STM :canon 50mm f1.8 : tamron  SP 70-300 f4/5.6 VC : SD eye-fi 4Go/Sandisk extreme pro 95mb/s 8Go:flash yongnuo YN565EX / YN560 II: tube extention macro 31;21;13mm : tamron SP 90mm DI f2.8:sigma 17-50 ex f2.8: efm 22mm...70D.111A

jeffadkins51

Quote from: spider on September 27, 2013, 05:03:01 PM
Newest build http://builds.magiclantern.fm/#/

Thanks, I've been checking the dropbox every day for over a week waiting for an update... why the change of locations again? I didn't see anything posted about it (must have missed it since you seem to know ^^)

Quote from: newsense on September 27, 2013, 06:57:06 PM
Nice video. You seem pretty familiar with ML. I have a question I have asked a few times but nobody can answer it, maybe you can help me. I am using ML digital iso with a setting of -0.3 so I can gain access to native iso's like 160. The problem is the histogram no longer gives the clip warnings and zebras do not work. I was told I need to change threshold settings but I am not sure what to set them to. If you can answer that it would be great, thanks.

Hmmm, this makes it sound like there is an option you can enable and then when you go to ISO you see more than the normal canon ones, is that correct? *goes looking for this setting*

My understanding as of now before looking for this is that you can change the ISO, say to 160, inside of ML, but it doesn't actually make it a normal ISO setting that you can select from pressing the ISO button?

newsense

Quote from: a1ex on September 27, 2013, 10:08:21 PM
Measure the brightest point with the spotmeter and set the overexposure threshold just a little lower.

Thanks. I found that with cinestyle and iso 160 and multiples of, 97% seems to be the brightest point so I set the threshold to 96% and zebras now work. Is there any way to get histogram warnings to work also with iso 160 and multiples of? thanks again!

kazeone

Is there a way or could this be added that with "Motion Detect" when it is triggered have it burst a series of photos? and have us have the ability to set how many photos to quickly be taken when its triggered?

Edit: never mind, under "Shoot Preferences" it looks like I set it there for "Motion Detect". :)

Edit 2: hmm it seems pretty slow compared to the cameras typical burst speed, is there a way to make it faster?

kazeone

Just came across this "Audio Remote Shoot" is this still a feature in ML, will we see this feature one day assuming we overcome the audio issues? just curious :)

Alex N

I am writing an interpreter in case if something is not clear. Such a problem when recording video includes Magic Zoom pop-up window with strong jumps orentirovatsya of focus is very hard it just me, if not then it can be a big request like that before ispravit.Takzhe remember was a confirmation of focus in green on the box Magic Zum.I more You can display the audio level that would have been seen writes sound or not. Borrowed from other 600D firmware is working at 100 even regretted that took the 650D.

Felipe

Could some one please, tell me in Flash Tweaks, Third P Flash Live view, How to make it work ?
Because When I turn it on doesn't fire studio strobes in live view.
Thank you
650D-700D

Nautilus

Hi,

I need Magic Lantern on my 650D mainly for audio monitoring (I have bought a mini USB to stereo 3.5mm jack cable for that purpose). But seeing that audio related features are disabled, I'm kind of disappointed.

Is there a timeframe on when are these features going to be added to 650D build?
Thanks
Canon 650D w/18-55 Kit lens | Sigma 30mm f1.4 | CarrySpeed VF-4 Viewfinder | Rode VideoMic Pro | Manfrotto MVH502A Fluid Head + MVT502AM Tripod System

walter_schulz

Quote from: Nautilus on September 30, 2013, 08:14:33 PMIs there a timeframe on when are these features going to be added to 650D build?
Home Page -> Support -> F.A.Q -> Troll Questions -> Last one

jeffadkins51

From my tests tonight I can say that on the 650D the flash expo override settings under flash tweaks appears to no longer be working. I took several pictures at -10 and at 0 with no difference at all in the pictures. (full manual mode, tripod, etc, no variances or camera controls changing by themselves)

Could you good folks be so kind as to look into this when you get the chance?

Thanks!
-Jeff

demetrisag

Guys is it my idea or has the raw writting performance on 1280*720 dropped down?

I could write continously on this a while ago, while now it can't.

Rewind

Quote from: demetrisag on October 01, 2013, 06:34:33 PM
Guys is it my idea or has the raw writting performance on 1280*720 dropped down?

I could write continously on this a while ago, while now it can't.

Just checked with tle latest nightly — 1280x720 @24p continious OK.

demetrisag

well maybe my cards needs a format then. I dont know. its weird