Canon 650D / T4i

[nanomad]

ACHTUNG!!!!!!!!!!!!!!!!!!!!

A LOT OF FUNCTIONS DOESN'T WORK WITH MANUAL LENSES (Helious)

Even Global Draw doesn't work

CHECK IT OUT

O.o

upload a video where you have a manual lens attached and you go through ML menus. Did you remember to press the INFO button while in LV to clear Canon overlays?

[nanomad]

maybe a bug:
last day i try satrianis 09.03. build and intervalometer with bulb timer doesnt working, i set bulb and bulb timer to 45 sec, and later 2 min but all shots taken with 30 sec, and the expo setting always go to 30 sec from bulb. i set again bulb, and start inervalometer and bulb timer, and the result again: 30 sec.

Known bug with _all_ the models without a separate bulb mode. I've got an idea on what's causing it but need a bit of time to debug it properly

[saha007]

ML\doc  - You open for editing? there is a desire to make Russification!

[ERBUSI]

ML_N_05.09.2013.zip to  ISOless PH err(2):

[NikeFreak]

ML_N_05.09.2013.zip to  ISOless PH err(2):

нужно удалить настройки МЛ, через меню ML сделать сброс конфигурации (Prefs-Config file-Restore ML defaults), или удалил файл MAGIC.CFG из папку :\ML\settings

it is necessary to remove the ML settings, through the menu ML to make configuration restart (Prefs-Config file-Restore ML defaults), or I removed the MAGIC.CFG file from the folder: \ML \settings

[NikeFreak]

where to find the help files? And how to install? It is desirable to Russian!...

держи земляк

подскажите, а как пользоваться дуал исо,  фотографирует все и снимает ок, а как его потом на обработать и объединить?
prompt and how to use дуал исо, photographs everything and removes ok and how then on to process and unite it?

[ashkaptsov]

O.o

upload a video where you have a manual lens attached and you go through ML menus. Did you remember to press the INFO button while in LV to clear Canon overlays?

Oops excuse me, I just downloaded new version from 31.08.2013 Now it works, before it didn't work.

[Rewind]

подскажите, а как пользоваться дуал исо,  фотографирует все и снимает ок, а как его потом на обработать и объединить?

http://www.magiclantern.fm/forum/index.php?topic=7139.0
read the first post.

[NikeFreak]

http://www.magiclantern.fm/forum/index.php?topic=7139.0
read the first post.

все работает спасибо!!!
everything works thanks! ! !

[ashkaptsov]

In image review when I pres SET and turn scrollwheel nothing happens. don't work all settings (timelapse,exposure,compare)

[Daniboy111]

Can tell you that rack focus doesn't seem to work on Canon 40mm STM 2.6 lens.

[nanomad]

In image review when I pres SET and turn scrollwheel nothing happens. don't work all settings (timelapse,exposure,compare)

Do you have a function associated to SET in photo mode via canon custom functions?

[anario]

Rack focus does not work with my 18-135 STM lens either.

[demetrisag]

Here they are:

https://dl.dropboxusercontent.com/u/57396600/enay_cr2.zip

 

Now i need some help undersanding this.

I've tried editiding the original CR2 file and however i underxpose that picture or move the shadow and highlights faders I can never see all this details of clouds in the middle of the picture as you can see with the dual iso one.

The original picture is iso 100 right? I mean by iso 100 you get as much detail as you can on the light side. and by iso 3200 you get as much detaill as you can on the dark side. Right? How come after you cr2dhr the dual iso there is more detail on the bright side?? there are clouds that I can never see on the original picture! Wouldnt those clouds need lower iso than 100 to appear?

Edit* Nevernind I think i figure it out. It seems from ACR that on the dual iso one you lowered the shutter speed from 125 to 1600. The comparison is not all that fair after all!

But stll what an amazing feuture that is!

[liberty hound]

hey guys, Im new to magic lantern. 1st question.. When i set the iso with magic lantern, does my metering meter for the magic antern iso or the canon ??

[ERBUSI]

Hi,

anyone ever tried raw video with this card : http://www.sandisk.com/products/memory-cards/sd/extremepro-sdxc-sdhc-uhs-1-95mbs/?capacity=16GB

higher resolution like 1728x972 possible ?

Thanks, Lukas

[Rewind]

Hi,

anyone ever tried raw video with this card : http://www.sandisk.com/products/memory-cards/sd/extremepro-sdxc-sdhc-uhs-1-95mbs/?capacity=16GB

higher resolution like 1728x972 possible ?

Thanks, Lukas

You can't go any faster then ~40MB/s because of SD controller hardware limit. Thus it doesn't matter what card are you using since it holds up this speed.
As for this one from your link, i have one. Works nice.

[ejszarny]

Did you use M?

yes, i always use Manual

[ejszarny]

Known bug with _all_ the models without a separate bulb mode. I've got an idea on what's causing it but need a bit of time to debug it properly

thank you.

[newsense]

Anyway to get the help files to work with sitranis latest build? I have the PDF on the root of my SD card.

[ERBUSI]

You can't go any faster then ~40MB/s because of SD controller hardware limit. Thus it doesn't matter what card are you using since it holds up this speed.
As for this one from your link, i have one. Works nice.

Thanks Rewind, Best

[tonysaabyc]

For some reason I can only get live view through Canon's format (therefore I can not use ML's zebra and peaking).  Can anyone help me with this?

[elmatambre]

Hello Iam very happy using this ML Alpha and NOW i like to used the dual iso ... I can read that in this forum. But I can found in the ML Menu. Can you help me to do that. Thanks

[ashkaptsov]

Do you have a function associated to SET in photo mode via canon custom functions?

No, I don't. But also I checked if I switch on one of them it's same doesn't work

[Aborgh]

My pictures with dual iso came out super strange 

 

Stripes along the picture and a boost of magenta in bright areas!