Author Topic: Canon 650D / T4i (Read 1545938 times)

RafaLibrenz · « **Reply #500 on:** September 04, 2013, 12:45:21 PM »

Guys, it's working here!

Thanks nanomad, satriani, a1ex and all development team of Magic Lantern! It's really awesome!!

P.S.: The "ISOless PH err(2)" is also appearing here. I do 'reboot' a few times until the message leave the screen.

demetrisag · « **Reply #501 on:** September 04, 2013, 12:52:43 PM »

It seems the iso base mode is working fine again if i disable autoexpo mode though. but the dual iso problem remains.

Ok my bad with autoexpo! I just discovered what autoexpo does! I think the only problem is the one with the dual iso!

roterrion · « **Reply #502 on:** September 04, 2013, 06:07:18 PM »

i left the forum for a week and there's dual iso now?

you guys working so fast.

midnite · « **Reply #503 on:** September 04, 2013, 07:23:29 PM »

ISOless PH err(2)

i got this error after i turn dual iso "on"

what does it mean? cant make dual iso work...

Rewind · « **Reply #504 on:** September 04, 2013, 07:24:55 PM »

Have anyone succesfully compiled the mlv_rec for 650D?
I've tried but no luck so far )

Enay · « **Reply #505 on:** September 04, 2013, 08:31:40 PM »

Hello.

My test for Dual ISO on 650d. Excelent feature!

Normal ISO 100 still (unedited):

Dual ISO 100/3200 still (edited for the ground part to have similar brightness):

The difference is clearly visible in dynamics.

Thanx Guys for Your work

blade · « **Reply #506 on:** September 04, 2013, 08:34:16 PM »

The way that looks...man i just might be shooting everything with dual iso....

midnite · « **Reply #507 on:** September 04, 2013, 09:12:54 PM »

Quote from: midnite on September 04, 2013, 07:23:29 PM

ISOless PH err(2)

i got this error after i turn dual iso "on"

what does it mean? cant make dual iso work...

anyone having / had same issue?

edit: found it, using raw + jpeg mode solves it... i ve been using only raw mode.

edit2: it came again. damnit

blade · « **Reply #508 on:** September 04, 2013, 09:14:36 PM »

Quote from: midnite on September 04, 2013, 09:12:54 PM

anyone having / had same issue?

Had it a couple of times, few reboots, and it was gone..

nanomad · « **Reply #509 on:** September 04, 2013, 10:01:26 PM »

@Enay: can you upload the original CR2?

1% · « **Reply #510 on:** September 04, 2013, 10:16:23 PM »

People getting the photo error.. guess the regs change on this camera but on EOSM it never happens.

Wazy · « **Reply #511 on:** September 05, 2013, 02:22:38 AM »

Seems like I'm not the only one getting the ISOless Error. Now I can't seem to work around this. Hopefully there's a fix for this soon! Thanks for all the work thus far!

lucawen · « **Reply #512 on:** September 05, 2013, 02:25:59 AM »

Thanks all for reply my questions, and, i buy the SanDisk Extreme Pro - 8GB, and, this value, what the time for recording in 720p on my 650D? Sorry for my english, iam brazilian. Thanks all!!!!!

tonysaabyc · « **Reply #513 on:** September 05, 2013, 02:47:57 AM »

Hey, is there any way to install this on a 64gb card, or do I need to go to 32 or less?

lucawen · « **Reply #514 on:** September 05, 2013, 03:20:51 AM »

32gb believe will not be possible. Try a 16GB

lucawen · « **Reply #515 on:** September 05, 2013, 03:56:47 AM »

Hey, who to use HDR and RAW? It is possible? HDR use Workflow whit virtualdub,etc... And RAW use Raw2DNG, help-me?

RafaLibrenz · « **Reply #516 on:** September 05, 2013, 03:59:39 AM »

Quote from: tonysaabyc on September 05, 2013, 02:47:57 AM

Hey, is there any way to install this on a 64gb card, or do I need to go to 32 or less?

Yes, there is a way. Search for "Installing Magic Lantern on other cards" here: http://www.magiclantern.fm/install.html

RafaLibrenz · « **Reply #517 on:** September 05, 2013, 05:14:42 AM »

Quote from: midnite on September 04, 2013, 09:12:54 PM

anyone having / had same issue?

Same thing here. ISOless PH err(2). Sometimes I can make dual iso work, but most times not.

ejszarny · « **Reply #518 on:** September 05, 2013, 08:38:26 AM »

maybe a bug:
last day i try satrianis 09.03. build and intervalometer with bulb timer doesnt working, i set bulb and bulb timer to 45 sec, and later 2 min but all shots taken with 30 sec, and the expo setting always go to 30 sec from bulb. i set again bulb, and start inervalometer and bulb timer, and the result again: 30 sec.

saha007 · « **Reply #519 on:** September 05, 2013, 08:53:07 AM »

where to find the help files? And how to install? It is desirable to Russian!...

ERBUSI · « **Reply #520 on:** September 05, 2013, 09:07:23 AM »

Same thing here. ISOless PH err(2)

blade · « **Reply #521 on:** September 05, 2013, 09:11:39 AM »

Quote from: ejszarny on September 05, 2013, 08:38:26 AM

maybe a bug:
last day i try satrianis 09.03. build and intervalometer with bulb timer doesnt working, i set bulb and bulb timer to 45 sec, and later 2 min but all shots taken with 30 sec, and the expo setting always go to 30 sec from bulb. i set again bulb, and start inervalometer and bulb timer, and the result again: 30 sec.

Did you use M?

ashkaptsov · « **Reply #522 on:** September 05, 2013, 09:15:02 AM »

ACHTUNG!!!!!!!!!!!!!!!!!!!!

A LOT OF FUNCTIONS DOESN'T WORK WITH MANUAL LENSES (Helious)

Even Global Draw doesn't work

CHECK IT OUT

Enay · « **Reply #523 on:** September 05, 2013, 10:21:54 AM »

Quote from: nanomad on September 04, 2013, 10:01:26 PM

@Enay: can you upload the original CR2?

Here they are:

https://dl.dropboxusercontent.com/u/57396600/enay_cr2.zip

dalanz · « **Reply #524 on:** September 05, 2013, 11:55:52 AM »

Hey colleagues,
I would like to propose something in the intervalometer. Would it be possible to show a timer on the Liveview while shooting? I would like to know the remaining time to finish.

News:

Author Topic: Canon 650D / T4i (Read 1545938 times)