Soldering more memory for Raw recording

Started by Schmeknicolor, May 30, 2013, 04:50:50 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Schmeknicolor

Just a thought...
With a proper PCB machine could it be possible to change the memory chip with a greater one, could it work?
Would this help in raw recording buffer size and transfer to the cards?

eatbuckshot

While there's always a possibility of doing that, it is a bit too impractical.  The BGA memory chips would have to be the exact same pin out and voltage requirements.  Then we'd have to make sure that the entire memory is addressable and not conflict with other peripherals (speculating, maybe possible if there's some slack, and with ML).  Even if we could theoretically increase the Memory, it would only minimally increase recording time because the buffer offloading speed to cards would have to be fast enough. 

AnotherDave

To the point of physically altering the camera... I think you should just buy a new one that does what you want.

Software that unlocks features in one thing... hotroding a camera is another.

hirethestache

Quote from: AnotherDave on June 06, 2013, 08:47:21 PM
To the point of physically altering the camera... I think you should just buy a new one that does what you want.

Software that unlocks features in one thing... hotroding a camera is another.

Will you please stop trolling and go hang out on a BMCC forum? Jesus.
@HireTheStache
www.HireTheStache.com
C100, 5D3, 5D2, 6D

Audionut

Quote from: hirethestache on June 07, 2013, 03:54:38 AM
Will you please stop trolling and go hang out on a BMCC forum? Jesus.

Report the post and let a mod handle it please.  Posts such as that add nothing to the discussion and only serve to derail the thread.

Thanks.

1%

I did this with routers.. it worked.. but I think this memory has even smaller pins (or bga).  I guess you could do it in a reflow oven. Or try with a hot air gun. Just clean the spots from de-soldered memory really well and do it with the paste + balls. Probably easy to find stencils/memory chips.

All cameras were bga ram?

Then of course you probably have to patch the fw or maybe it will hang and need some stuff changed. I guess you would have to experiment