60D RAW video - it's working !!!

[gabezermeno]

Looks like the frame rate is too fast?

Yeah I actually have no clue how long to set the duration of the frames in premiere? I set them to .01 and that seems too fast and then .02 seems too long. Any Ideas? and I was shooting at ISO 125

[gabezermeno]

Anyone else noticing that the shots seem properly exposed on the camera and then underexposed when your editing? You then have to brig up the exposure which creates more noise.

[OrionnebelGalaxie17]

Thank you so much!!! 
Here is my first raw video in comparison to the h.264!

[kgv5]

Very nice    What is the original resolution of the RAW footage? Did you upscale it?

[handbanana]

Anyone else noticing that the shots seem properly exposed on the camera and then underexposed when your editing? You then have to brig up the exposure which creates more noise.

Yes. Shots are underexposed and white balance is always 5600, although the tint does change. I'm also getting a lot of noise and even my frame rates are off. When I do FPS override to 24 is goes to 24.008 unless I use the force exact option so it goes to 24.000. I messed with the advanced settings to get it to 23.976 but I wonder if it's happening to others as well or it's simply my camera? With regular ML in movie mode my shutter would always be 1/46 or 1/47.

We need to keep in mind that this is a port of the 550D version so it seems to not be properly configured to support the 60D as well. I guess we'll get a better look at the RAW recording once it's better configured.

[GARoss]

Hi everyone.

 I'd like to join the discussion as I have a 60D but need to know what program works with RAW video. I do have PS CS6 & use Bridge / ACR to open standard Canon RAW files with.

BTW - I did try ML 2.3 but my 60d would not turn on at times so I uninstalled ML.

[marekk]

Autoexec.bin and raw_rec compiled few minutes ago

https://docs.google.com/file/d/0B-HdscXfsKpgd0NybFNoanJfS3M/edit?usp=sharing

[kotik]

Correct me if I am wrong!   

IMHO the bottleneck of the Canon EOS 60D is the built-in SD-card interface.
Several tests show that the maximum troughput is about 20 MB/s.

Even a resolution of 960x540 pixels, 25 FPS, RAW, 14 bits/color, needs 22,68 MB/s (or 21,6 MiB).

So shouldn't we aim at the maximum of 960 x 480 pixels, still needing 20,16 MB/s (or 19,2 MiB).
Note: these calculations do not include audio!

[marekk]

It's not a port of 550D. I disabled only few option in ML like 550D users.

We need to keep in mind that this is a port of the 550D version so it seems to not be properly configured to support the 60D as well. I guess we'll get a better look at the RAW recording once it's better configured.

[handbanana]

Correct me if I am wrong!   

IMHO the bottleneck of the Canon EOS 60D is the built-in SD-card interface.
Several tests show that the maximum troughput is about 20 MB/s.

Even a resolution of 960x540 pixels, 25 FPS, RAW, 14 bits/color, needs 22,68 MB/s (or 21,6 MiB).

So shouldn't we aim at the maximum of 960 x 480 pixels, still needing 20,16 MB/s (or 19,2 MiB).
Note: these calculations do not include audio!

I did a test of that exactly for the reasons you say.

[handbanana]

It's not a port of 550D. I disabled only few option in ML like 550D users.

Ah ok, my mistake. Thanks so much for your work btw. What's new in the new compile?

[marekk]

https://bitbucket.org/hudson/magic-lantern/commits/all/016ea7d1f045

Ah ok, my mistake. Thanks so much for your work btw. What's new in the new compile?

[OrionnebelGalaxie17]

some quick iso tests 100, 200, 400, 800, 1600, 3200, 6400     
(no noise reduction)
https://www.dropbox.com/sh/lfwrhwz7l1jnyeg/roK99YdSo-

[davidcl0nel]

I'm stuck with my own ARM cross compiler toolchain yet (EABI version mismatch with own arm-toolchain, and with precompiled arm he couldn't find, even the path is absolutely correct - tomorrow....)...
So I've tried your build a few minutes ago! My main goal is only timelapse (1fps or less), so I don't care about writing speed. My first attempt with 1720x1146 @ 0.5fps worked fine. Thanks!
Other interesting feature would be silent picture (for timelapse), but it isn't included in your build, am I correct?

[OrionnebelGalaxie17]

Very nice    What is the original resolution of the RAW footage? Did you upscale it?

Thanks the original resolution was 1600x900...

[1%]

Code: [Select]

Note: these calculations do not include audio!
Forget about audio on any SD camera... 6D (2x speed) has to drop to like 600D rates so you'd be recording real small.

[marekk]

I had to remove some features because 60D has problems with booting of full ML package with modules enabled. You should to download normal nightly build, silent picture is included.

Other interesting feature would be silent picture (for timelapse), but it isn't included in your build, am I correct?

[ProfessorX]

I'm a total noob, just so we are clear I saw these post and had to test it out. 1280x720

[payne]

I had to remove some features because 60D has problems with booting of full ML package with modules enabled. You should to download normal nightly build, silent picture is included.

What was removed? Anything that should hold us back from installing this newest version? I am very excited about the idea of the raw histogram as the current one definitely does not work.

Thanks

[handbanana]

I got 1440x604 working with no skipped frames...



At 12fps 

But I did some Twixtoring... and well...

[gerk.raisen]

Marekk,

I had to remove some features because 60D has problems with booting of full ML package with modules enabled.

What exact error did you get?
What features you removed?
Maybe is similar/related to my error
http://www.magiclantern.fm/forum/index.php?topic=5650.0

[marekk]

It works, even in raw movie mode.
Enable raw_rec module, enable raw recording in movie properties, enable global graw, go to histogram properties in ML, enable RAW Histogram, set ETTR..

I am very excited about the idea of the raw histogram as the current one definitely does not work.

Thanks

[marekk]

no errors, it simply hangs.
I removed audio features, focus and photo options. I wil post my all_features.h in the evening.

Marekk,

What exact error did you get?
What features you removed?
Maybe is similar/related to my error
http://www.magiclantern.fm/forum/index.php?topic=5650.0

[marekk]

If you want to run ML on 60D with all features (except raw rec) pls download latest official ML nightly build.

Canon 60D has problems with booting when ML is compiled with modules and tcc, the only way for now is to remove some standard features and it boots.

What was removed? Anything that should hold us back from installing this newest version? Thanks

[tool]

These are my old benchmark with 2 cards.
Transcend 32gb Class 10

Sandisk 32gb Extreme 45mb/s