Author Topic: 50D Raw video  (Read 820297 times)

v1rt

  • Freshman
  • **
  • Posts: 69
Re: Raw video on 50d and 40d
« Reply #1950 on: June 28, 2013, 10:17:47 PM »
That's odd. So you're saying that while you are in 5x zoom mode, if you enter the magic lantern menu, you don't see a grayed-out "1920x1072"? I'm probably stating the obvious here... but the 5x button isn't an on/off switch 1920 recording, it's a different video mode altogether.

The card you are using exceeds the bitrate required for 1920 recording. Perhaps 1% can comment?

It's good now. 1% helped me on how to get it triggered. I have actually posted just few minutes ago since I had a follow up question.

Andy600

  • Contributor
  • Hero Member
  • *****
  • Posts: 1863
  • Have you tried turning it off and on again?
Re: Raw video on 50d and 40d
« Reply #1951 on: June 28, 2013, 10:18:27 PM »
That's odd. So you're saying that while you are in 5x zoom mode, if you enter the magic lantern menu, you don't see a grayed-out "1920x1072"? I'm probably stating the obvious here... but the 5x button isn't an on/off switch 1920 recording, it's a different video mode altogether.

The card you are using exceeds the bitrate required for 1920 recording. Perhaps 1% can comment?

1072?  ??? - should be 1080 if set width is 1920 (16:9)
Colorist working with Davinci Resolve, Baselight, Nuke, After Effects & Premier Pro. Occasional Sunday afternoon DOP. Developer of Cinelog-C Colorspace Management and LUTs - www.cinelogdcp.com

nightvision04

  • New to the forum
  • *
  • Posts: 39
Re: Raw video on 50d and 40d
« Reply #1952 on: June 28, 2013, 10:18:55 PM »
Got it to work! However, what will be recorded as video? Is it still going to record the non-zoomed area? Btw, it stopped after 2 seconds. My 400x is so slow, LOL :D Really need to buy the 1000x cf cards.

Great to hear you got it working! Using a Toshiba 1066x Exceria Pro 64gb, i'm only getting about 10 seconds... Have you tried turning off global draw? If you haven't yet, that should give you a few more seconds.
Resolve Addict. ML RAW Addict. Contagious.

v1rt

  • Freshman
  • **
  • Posts: 69
Re: Raw video on 50d and 40d
« Reply #1953 on: June 28, 2013, 10:20:18 PM »
Great to hear you got it working! Using a Toshiba 1066x Exceria Pro 64gb, i'm only getting about 10 seconds... Have you tried turning off global draw? If you haven't yet, that should give you a few more seconds.

Yup it's off. Are you saying that's impossible for our 50D to do a continous 1920x1080 raw recording atm?

Andy600

  • Contributor
  • Hero Member
  • *****
  • Posts: 1863
  • Have you tried turning it off and on again?
Re: Raw video on 50d and 40d
« Reply #1954 on: June 28, 2013, 10:20:59 PM »
@nightvision04 - what build are you using?

I'm getting 15 secs of 25p (1080p) on a 600x transcend card.
Colorist working with Davinci Resolve, Baselight, Nuke, After Effects & Premier Pro. Occasional Sunday afternoon DOP. Developer of Cinelog-C Colorspace Management and LUTs - www.cinelogdcp.com

nightvision04

  • New to the forum
  • *
  • Posts: 39
Re: Raw video on 50d and 40d
« Reply #1955 on: June 28, 2013, 10:21:23 PM »
Yup it's off. Are you saying that's impossible for our 50D to do a continous 1920x1080 raw recording atm?

That's correct.
Resolve Addict. ML RAW Addict. Contagious.

v1rt

  • Freshman
  • **
  • Posts: 69
Re: Raw video on 50d and 40d
« Reply #1956 on: June 28, 2013, 10:23:29 PM »
@nightvision04 - what build are you using?

I'm getting 15 secs of 25p (1080p) on a 600x transcend card.

I'll butt in here. :)
Which build should I use? Maybe you can specify a link. I'm using the latest GregoryofManhattan. I also read yesterday that there is a Huston. Not sure what it is.

Andy600

  • Contributor
  • Hero Member
  • *****
  • Posts: 1863
  • Have you tried turning it off and on again?
Re: Raw video on 50d and 40d
« Reply #1957 on: June 28, 2013, 10:29:09 PM »
I'll butt in here. :)
Which build should I use? Maybe you can specify a link. I'm using the latest GregoryofManhattan. I also read yesterday that there is a Huston. Not sure what it is.

Gregory's latest is up to date. I'm using 1%'s latest (own compile). Not sure if he's uploaded it anywhere???

BTW 1% - when you go into LV with the latest TL build I get black pillar boxes as if it's in 480p and need to hit the info button 2 or 3 times to get rid of them.
Colorist working with Davinci Resolve, Baselight, Nuke, After Effects & Premier Pro. Occasional Sunday afternoon DOP. Developer of Cinelog-C Colorspace Management and LUTs - www.cinelogdcp.com

v1rt

  • Freshman
  • **
  • Posts: 69
Re: Raw video on 50d and 40d
« Reply #1958 on: June 28, 2013, 10:30:32 PM »
Gregory's latest is up to date. I'm using 1%'s latest (own compile). Not sure if he's uploaded it anywhere???

Maybe I can try his build. Do you know where I can download it?

Andy600

  • Contributor
  • Hero Member
  • *****
  • Posts: 1863
  • Have you tried turning it off and on again?
Re: Raw video on 50d and 40d
« Reply #1959 on: June 28, 2013, 10:36:54 PM »
Maybe I can try his build. Do you know where I can download it?

https://bitbucket.org/andy600/tl50d/downloads/1.percents.tragic.lantern.for.50D.test.only.compiled.by.andy600.zip

for best speeds set Dialog Timers to 'disable' in debug menu before going into Live View
Colorist working with Davinci Resolve, Baselight, Nuke, After Effects & Premier Pro. Occasional Sunday afternoon DOP. Developer of Cinelog-C Colorspace Management and LUTs - www.cinelogdcp.com

ClmnsKbn

  • New to the forum
  • *
  • Posts: 2
Re: Raw video on 50d and 40d
« Reply #1960 on: June 28, 2013, 10:44:30 PM »
I'm currently looking into buying a 50D.

Are there any 600x cards that can reliably do 1080 crop and full sensor modes (Preferably 16 or 32 GB)?

Andy600

  • Contributor
  • Hero Member
  • *****
  • Posts: 1863
  • Have you tried turning it off and on again?
Re: Raw video on 50d and 40d
« Reply #1961 on: June 28, 2013, 10:46:52 PM »
I'm currently looking into buying a 50D.

Are there any 600x cards that can reliably do 1080 crop and full sensor modes (Preferably 16 or 32 GB)?

Transcend 600x 16gb is great for the money. Writes up to 74MB/s :) If you go for the 32gb get the 1000x (but don't get the 16gb 1000x. It's slower than the 600x)
Colorist working with Davinci Resolve, Baselight, Nuke, After Effects & Premier Pro. Occasional Sunday afternoon DOP. Developer of Cinelog-C Colorspace Management and LUTs - www.cinelogdcp.com

v1rt

  • Freshman
  • **
  • Posts: 69
Re: Raw video on 50d and 40d
« Reply #1962 on: June 28, 2013, 10:52:36 PM »

ClmnsKbn

  • New to the forum
  • *
  • Posts: 2
Re: Raw video on 50d and 40d
« Reply #1963 on: June 28, 2013, 11:04:56 PM »
Transcend 600x 16gb is great for the money. Writes up to 74MB/s :) If you go for the 32gb get the 1000x (but don't get the 16gb 1000x. It's slower than the 600x)

Thanks!
A lot of people here seem to love the Komputerbay 64GB 1000x. Is the 64GB 600x any good?

Andy600

  • Contributor
  • Hero Member
  • *****
  • Posts: 1863
  • Have you tried turning it off and on again?
Re: Raw video on 50d and 40d
« Reply #1964 on: June 28, 2013, 11:06:42 PM »
Thanks!
A lot of people here seem to love the Komputerbay 64GB 1000x. Is the 64GB 600x any good?

I dunno. I have the 64gb 1000x too :D
Colorist working with Davinci Resolve, Baselight, Nuke, After Effects & Premier Pro. Occasional Sunday afternoon DOP. Developer of Cinelog-C Colorspace Management and LUTs - www.cinelogdcp.com

1%

  • Developer
  • Hero Member
  • *****
  • Posts: 5936
  • 600D/6D/50D/EOSM/7D
Re: Raw video on 50d and 40d
« Reply #1965 on: June 28, 2013, 11:35:23 PM »
Quote
BTW 1% - when you go into LV with the latest TL build I get black pillar boxes as if it's in 480p and need to hit the info button 2 or 3 times to get rid of them.

Yep, shrinks the LV to add some more .1 MB.

Andy600

  • Contributor
  • Hero Member
  • *****
  • Posts: 1863
  • Have you tried turning it off and on again?
Re: Raw video on 50d and 40d
« Reply #1966 on: June 29, 2013, 12:05:42 AM »
Yep, shrinks the LV to add some more .1 MB.

aha, I knew there had to be a reason for it :D
Colorist working with Davinci Resolve, Baselight, Nuke, After Effects & Premier Pro. Occasional Sunday afternoon DOP. Developer of Cinelog-C Colorspace Management and LUTs - www.cinelogdcp.com

v1rt

  • Freshman
  • **
  • Posts: 69
Re: Raw video on 50d and 40d
« Reply #1967 on: June 29, 2013, 12:31:08 AM »
That black screen happened to me too. I also had other errors.

Andy600

  • Contributor
  • Hero Member
  • *****
  • Posts: 1863
  • Have you tried turning it off and on again?
Re: Raw video on 50d and 40d
« Reply #1968 on: June 29, 2013, 12:38:35 AM »
That black screen happened to me too. I also had other errors.

Errors?
Colorist working with Davinci Resolve, Baselight, Nuke, After Effects & Premier Pro. Occasional Sunday afternoon DOP. Developer of Cinelog-C Colorspace Management and LUTs - www.cinelogdcp.com

v1rt

  • Freshman
  • **
  • Posts: 69
Re: Raw video on 50d and 40d
« Reply #1969 on: June 29, 2013, 12:41:19 AM »
Errors?

Yes, I'll try to recreate it again later and post it. Or maybe because my cf card ran out of space. I will have to redo it.

1%

  • Developer
  • Hero Member
  • *****
  • Posts: 5936
  • 600D/6D/50D/EOSM/7D
Re: Raw video on 50d and 40d
« Reply #1970 on: June 29, 2013, 01:21:17 AM »
Yea, what errors?

At 1080P I'm getting predicted 2K+ even 2500+ frames... then around 4900MB something happens, buffer fills an it stops early, writes get smaller and smaller. Writing at 80-81 1920x1038 is continuous without this issue.

v1rt

  • Freshman
  • **
  • Posts: 69
Re: Raw video on 50d and 40d
« Reply #1971 on: June 29, 2013, 01:46:28 AM »
Yea, what errors?

At 1080P I'm getting predicted 2K+ even 2500+ frames... then around 4900MB something happens, buffer fills an it stops early, writes get smaller and smaller. Writing at 80-81 1920x1038 is continuous without this issue.

Do you think our 50D will be able to record 1080raw without stops in the future?

1%

  • Developer
  • Hero Member
  • *****
  • Posts: 5936
  • 600D/6D/50D/EOSM/7D
Re: Raw video on 50d and 40d
« Reply #1972 on: June 29, 2013, 04:02:00 AM »
Maybe, the 1920x1038 is pretty damn close. I think I should graph it and see what is happening. Have to look for another way to increase speed too.

albert-e

  • Member
  • ***
  • Posts: 135
Re: Raw video on 50d and 40d
« Reply #1973 on: June 29, 2013, 05:39:48 AM »
That's correct.

Don't bet your life on it!

:-)

nightvision04

  • New to the forum
  • *
  • Posts: 39
Re: Raw video on 50d and 40d
« Reply #1974 on: June 29, 2013, 07:26:25 AM »
Don't bet your life on it!

:-)

Agreed :) He was just asking if it was possible at the moment though.
Resolve Addict. ML RAW Addict. Contagious.