5D2 RAW video Builds 14-Bit

Started by a.d., May 20, 2013, 05:27:13 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Samco

I'm sorry but I'm very new to ML. I'd like to install the version that will allow me to shoot RAW video with my mkII. Where do the latest download files fit in to the install? Should I do the regular ML install first or can I just swap/add the ML (modules) folder into the original downloaded ML v2.3 folders.

Sorry I know you guys are far past this I just wanna make some great videos.

Thanks

xNiNELiVES


Indianac

Quote from: a.d. on July 23, 2013, 08:54:05 AM
@xNiNELiVES
no code change => no new build
it's in the camera. in general canon firmware masked the bad pixel out (value=0)

Sorry for the late reply. Thanks AD.  I found some sites which show how to get Canon's firmware to "discover" and correct for new dead pixels. I'm going to give it a go. Appreciate your help guys.

elarturex


elarturex


Doyle4

The new Auto Exposure is pretty damn sweet!

Going to try this option tomorrow at an air show :)

Doyle4

@elarturex

You need to put your link in between the code. E.g:

[ vimeo]your link here[ /vimeo] <---- i added spaces so it didnt think i was posting a link, theres a button under the Bold button that has V press that and insert :)


Lukasz

I made clip for my friends containing only RAW footage thanks to a.d.build2013/07/19 5bad65ff8cb8. Still hoping for someone to help me with my only 60MB/s with 64gb 1000x Lexar card write speed and frequent crashes with anything like monitor or okii controller connected to the camera. Also have 6 corrupted clips out of 67 which can not be fixed (adding footer like advised on the forum make the conversion to dng possible but it is just pinkish mush) ALL were created while okii controller was plugged in. Camera on it's own recording bugs free.

togg

Just received my 64GB 1000X Komputerbay  :o After warming up it can do 1856X1004 continuous, 74.9-75 MB/s. I've filled the card.
Anyone was able to get more speed? Even a little more.


edit: I'm an idiot. To see maximum speed I have to put a higher res. Anyway.

Siberia

FPS override, Exact FPS,
shoot 0.2 fps, get a lot of copies of the first frame. And 1.0 fps is the same.
What to do? how to disable it?
Only at 2 FPS recording is normal.

PlayIt

Hi togg

24fps or 25fps? I get continuous with 24fps, with that resolution. same card. What you get with 25fps?
5d markII

dariSSight

Quote from: togg on July 25, 2013, 01:13:28 PM
Just received my 64GB 1000X Komputerbay  :o After warming up it can do 1856X1004 continuous, 74.9-75 MB/s. I've filled the card.
Anyone was able to get more speed? Even a little more.

Do you think 1856x1004 is the best continues option?
Canon 5D Mark II

togg

Quote from: dariSSight on July 25, 2013, 06:08:17 PM
Do you think 1856x1004 is the best continues option?

Yes!
It would be wonderful to achieve continuous 1856X1044 (16/9) someday.

xNiNELiVES

I second the 1856x1004 Continuous, though I rather be at 1880. So 1880x940 is where its at for me.\

Actually no its not continuous for me, the camera is on the borderline of continuous and it is for the first couple minutes. Then once the card starts filling more the card becomes 1 mb/s slower and the card can't go continuous.

togg

Quote from: PlayIt on July 25, 2013, 04:54:18 PM
Hi togg

24fps or 25fps? I get continuous with 24fps, with that resolution. same card. What you get with 25fps?

24fps, 25 it's not continuous, the camera can't go up to 77.7 MB/s. 25 fps gives me 1394frame.

xNiNELiVES

I remember one time I was using my camera in crop mode I got 78mb/s, it was crazy...

dariSSight

Quote from: xNiNELiVES on July 25, 2013, 06:34:27 PM
I second the 1856x1004 Continuous, though I rather be at 1880. So 1880x940 is where its at for me.\

Actually no its not continuous for me, the camera is on the borderline of continuous and it is for the first couple minutes. Then once the card starts filling more the card becomes 1 mb/s slower and the card can't go continuous.

How much Upres do you think 1856x1004 or 1880x940 can handle before it disturbs the quality?
Canon 5D Mark II

xNiNELiVES

Quote from: dariSSight on July 25, 2013, 09:38:32 PM
How much Upres do you think 1856x1004 or 1880x940 can handle before it disturbs the quality?

I don't know, about 250 pixels on the width and the same proportionally on the width.

Btw tried new build a.d. works great! I'd like to request a interface that has the writing speed and a timer. No buffer other buffer statuses.

dariSSight

Quote from: xNiNELiVES on July 25, 2013, 10:01:42 PM
I don't know, about 250 pixels on the width and the same proportionally on the width.

Btw tried new build a.d. works great! I'd like to request a interface that has the writing speed and a timer. No buffer other buffer statuses.

So your saying a safe Upres for 1856x1004 is 2106x1254 or 1880x940 is 2130x1190?
Canon 5D Mark II

xNiNELiVES

Quote from: dariSSight on July 25, 2013, 11:00:43 PM
So your saying a safe Upres for 1856x1004 is 2106x1254 or 1880x940 is 2130x1190?

Yeah it would probably look very similar in sharpness to the native resolution, yes.

If you're crazy enough you can upscale to 2560 on the width...

elarturex


xNiNELiVES


elarturex


PlayIt

Quote from: togg on July 25, 2013, 06:47:31 PM
24fps, 25 it's not continuous, the camera can't go up to 77.7 MB/s. 25 fps gives me 1394frame.

with 25fps i get around 1500 before it stops
5d markII

justshady

Thanks for the update I'm now getting continuous rec. 24fps @ 1880 x 940 up from 1800 x 800 using Lexar 64gb x1000 and I can get almost 60 secs 1880 x 1016.