Author Topic: 5D2 RAW video Builds 14-Bit (Read 495399 times)

cmac · « **Reply #1275 on:** August 30, 2013, 09:50:30 PM »

Played with build from 08/16 - on Transcend 16GB the speed was like previous build.
Still have to learn how to handle this one as a movie camera :-)
Sorry for the focus pulls and shaking image. Still - I really enjoy the sharp and tonal richness of the RAW video - AWESOME WORK guys!

Doyle4 · « **Reply #1276 on:** August 31, 2013, 12:25:00 PM »

Nice speed increase in latest build

Hitting 101mb read and 83.8mb write

nice work!

Update: 1880 2:1 = Continuous, nice

teryoon · « **Reply #1277 on:** August 31, 2013, 01:46:27 PM »

My new Komputerbay 64gb card worked like a charm. It went so smoothly with no errors or freezing up at all. Check out the video I made with it!

reddeercity · « **Reply #1278 on:** September 01, 2013, 10:31:45 AM »

Hey all

Speed look like its back up to continuous for me
at 1856x1004 23.976p 75.0MB/s on Lexar 1000x 32GB= 9800 frames Full Card
And on my Lexar 1000x 64GB card i still have a road block @ 42GB 1856x1004 23.976p.
But one thing i have noticed is if you Format your card in Camera before
Recording, There is less Buffering going on. If i don't Format my card before recording i can not maintain
continuous recording at 1856x1004 , After all the testing it time to
go to Sleep, have good night all

JulianH · « **Reply #1279 on:** September 01, 2013, 03:01:02 PM »

A few test shots. ISO 1600/3200 with 50mm f/1.4 @ 2.0. Shot at 1856 x 1044.
Applied a Arri Lut in Resolve and stabilized some shots a bit, thats about it.
I wish Resolve would handle the raw files better. In ACR the aliasing/moire is a bit less bad. But I like the speed of the Resolve workflow... hard to beat that.

dariSSight · « **Reply #1280 on:** September 01, 2013, 03:33:29 PM »

Quote from: JulianH on September 01, 2013, 03:01:02 PM

A few test shots. ISO 1600/3200 with 50mm f/1.4 @ 2.0. Shot at 1856 x 1044.
Applied a Arri Lut in Resolve and stabilized some shots a bit, thats about it.
I wish Resolve would handle the raw files better. In ACR the aliasing/moire is a bit less bad. But I like the speed of the Resolve workflow... hard to beat that.

ISO 1600/3200? Did you use the Dual ISO module for RAW Video recording and what about ETTR?

JulianH · « **Reply #1281 on:** September 01, 2013, 03:50:11 PM »

No, some shots iso 1600, some 3200. I don't use ETTR, don't see the point for video, I just use manual exposure.

gtsofilms · « **Reply #1282 on:** September 01, 2013, 04:47:54 PM »

JulianH, nice job! Impressed with how clean the footage looks at 1600 and 3200? Do you notice a lot of noise when zoomed in or on a bigger screen?

I used the 5d2 raw as a bcam on a short recently and I didn't notice any significant ailiasing until I shot a close up of a piece of paper with a chart on it and the coloring on the lines of the table was off for that.

Btw with the newest build I can record 1880x1016 @ 1.85 quite long (stopped out at around 6minutes). Sustained recording speed around 76.4-77MB/S on a Komputerbay 1000x 64GB.

sebastienguerra01 · « **Reply #1283 on:** September 01, 2013, 06:51:55 PM »

Hello everyone.

It seems I've been missing something with the latest built because the modules are loaded, but can't turn them on. Can't do RAW.The modules are disabled

lespurs · « **Reply #1284 on:** September 01, 2013, 07:38:50 PM »

got the same problem with the aug 30th build

reddeercity · « **Reply #1285 on:** September 01, 2013, 07:50:19 PM »

Quote from: lespurs on September 01, 2013, 07:38:50 PM

got the same problem with the aug 30th build

You have to manually turn them on
There are off by default
Go in to the submenu turn on the
Modules you what .
Then reboot the camera
And they will be there.

lespurs · « **Reply #1286 on:** September 01, 2013, 07:56:42 PM »

Quote from: reddeercity on September 01, 2013, 07:50:19 PM

You have to manually turn them on
There are off by default
Go in to the submenu turn on the
Modules you what .
Then reboot the camera
And they will be there.

thanks

sebastienguerra01 · « **Reply #1287 on:** September 02, 2013, 04:30:30 AM »

got it! THANKS!

reddeercity · « **Reply #1288 on:** September 02, 2013, 09:08:04 AM »

Just a quick note about frame size on the new Built 08_30_

Testing larger frame sizes, at 1872x1012 23.976p 75.3MB/s for 4000 Frames

For me i need the larger 16x9 ratio, for paid work. 1856X1004 works for me but
i would like to see 1872x1004 Continuous.
So i'm always pushing for larger stable frame sizes.
But i still see a 42 GB Wall for 2048x940 23.976p this is the Same for 1856x1004 ?
There is little buffing until 41GB then the Buffer Maxs. out then stops at 42 GB every time, on Lexar1000x 64GB.

Has any One being able to record over 42GB at 1856x1004 23.976 on 64GB Cards of any make ?

elarturex · « **Reply #1289 on:** September 02, 2013, 09:40:27 AM »

dariSSight · « **Reply #1290 on:** September 02, 2013, 11:28:19 AM »

I was wondering if anyone could give me some good Time Lapse setting tips, also HDR video tips and if there is any way to do HDR Time Lapse what should my settings be? Thank for any feedback

Lichtsammler · « **Reply #1291 on:** September 02, 2013, 04:46:09 PM »

Hello everyone!

I am new to the forum. At first i wanted to thank everybody at Magic Lantern for your great work! The last build had a really impressive speed increase. Now i am able to record 1872x1016 continuously up to 42GB or 13000 frames , i think it was... with Komputerbay 64gb 1000x @ 75,9 - 76,3 MB/s / hacked mode / global draw off .
(its the second Komputerbay card..the first had to be replaced after smoe days...).

In the quality settings i choose "pure" RAW at the moment. Or does anyone use smaller/compressed quality settings like sRAW?

Doyle4 · « **Reply #1292 on:** September 02, 2013, 05:28:10 PM »

When shooting RAW video, change the quality settings to small jpeg! this gives you 32 of memory rather than 28

changing to jpeg will still allow you to record in RAW btw so dont panic about changing it

get rid of all RAW quality settings for RAW video.

Doyle4 · « **Reply #1293 on:** September 02, 2013, 05:33:09 PM »

Quote from: dariSSight on September 02, 2013, 11:28:19 AM

I was wondering if anyone could give me some good Time Lapse setting tips, also HDR video tips and if there is any way to do HDR Time Lapse what should my settings be? Thank for any feedback

There are some good topics on here, best looking at workflows etc, best place to start is the search bar

this section is mainly for 14-Bit RAW video Builds for 5D2

Lichtsammler · « **Reply #1294 on:** September 02, 2013, 05:37:47 PM »

Quote from: Doyle4 on September 02, 2013, 05:28:10 PM

When shooting RAW video, change the quality settings to small jpeg! this gives you 32 of memory rather than 28 changing to jpeg will still allow you to record in RAW btw so dont panic about changing it get rid of all RAW quality settings for RAW video.

Thank you! I will try that... maybe then i will pass the 42-43gb barrier(1872x936, 14000 frames..43gb). I guess THAT will save me a lot of postprocessing time as well...

Doyle4 · « **Reply #1295 on:** September 02, 2013, 05:41:37 PM »

no problem,

I think the mkii can only store upto 42gb not too sure why but im sure its explained somewhere on here.

Doyle4 · « **Reply #1296 on:** September 02, 2013, 05:44:12 PM »

Some other settings to try too:
Canon Menu
photo=small jpeg
Auto power off=OFF
LCD Brightness=manual
White Blance=Auto OFF

ML Menu
ETTR=Off
FPS override = set to exact 24
in the Raw Video tab
set previews to Auto
recording frame=White rect
Small hacks= On

Lichtsammler · « **Reply #1297 on:** September 02, 2013, 05:50:36 PM »

Thank you very much! Ok i will look for that 42gb thing...

The settings were exactly as you posted, except the whitebalance...and small jpeg of course :-)

mihaii · « **Reply #1298 on:** September 02, 2013, 06:06:59 PM »

i can confirm the 42GB limit exist on Komputerbay 64GB 1000x card.

Cineguz · « **Reply #1299 on:** September 02, 2013, 10:44:24 PM »

Hello everyone...after a very hard work..Urban Sniper tells the story of a professional shooter who finds himself in a situation that goes beyond his experience.
Shot entirely in Magic Lantern Raw
Enjoy

http://vimeo.com/lodiamont/urbansniper

News:

Author Topic: 5D2 RAW video Builds 14-Bit (Read 495399 times)