Uncompressed 14-bit RAW video testing - 5D Mark III

Started by bumkicho, May 17, 2013, 04:59:17 PM

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

Shield

Quote from: bumkicho on May 21, 2013, 08:00:52 PM
+1

My tamron 24-70 vc is now 24-70 2.8 and 120-350 2.8!!!

I thought this was really a 3x crop?  So wouldn't your 24-70 (I have that lens too; great lens!) be 72-210?

Shield

Well I just shot 32 gigs of raw movies in 3 files.  I immediately switched over to the SD card (my wav drive) and snapped a raw pic.]
Examining the exif info, the camera temperature was 43C.

I've seen it warmer than that shooting outdoors without any hacks with the standard firmware.  I'm not worried about overheating this 5d3 at all.


tihon

Quote from: Shield on May 22, 2013, 08:25:35 AM
Well I just shot 32 gigs of raw movies in 3 files.  I immediately switched over to the SD card (my wav drive) and snapped a raw pic.]
Examining the exif info, the camera temperature was 43C.

I've seen it warmer than that shooting outdoors without any hacks with the standard firmware.  I'm not worried about overheating this 5d3 at all.
Wow! No 4GB limit anymore? Please, give me an answer:)
Cinema, cinema, cinema


mnteddy

I've noticed a strange set of 2 black veritcal lines followed by 1 slightly over-exposed line on left side all of my 1920 pixel wide DNGs (seems to get cropped out if I shoot any less wide than 1920). I'm running the 5/25/13 build, though I've seen it on older builds as well. raw2dng beta 0.8 was used to convert the RAW files.

Here's a 1200% zoom of the top left corner: (and here's a link to the full DNG)

I should note that this DNG in particular has been processed through Adobe's DNG converter to reduce the file size, though this problem persists in the original DNGs as well.

Edit: I'm just realizing that I'm not alone in this. It seems most of the demo videos I'm seeing on YouTube and Vimeo suffer from these vertical black lines as well.

Peter Linov

with firmware May 30, I have no problem with 1920Х720 on cards with a 400 x speed.
  This is good!



senzazn12

Guys I'm a total noob here and this is my first post on here. First of all I want to extend my thanks to Alex and the rest of the ML team for putting forth their time and effort in putting such AMAZING and INCREDIBLE software on our DSLR's. I have a
Canon 5D Mark III and I was able to successfully install the May 29th build on my 5D3 yesterday morning. My question is how do I update to the May 30th build? Do I just replace the autoexec.bin file from my May 29th build to the new May 30th build or do I need to copy all the files from the new build to my CF card? Forgive me in advance if this question does not belong here. Thank you all.

Mei Lewis

Would love a way to turn off the bootflag on the 5DIII.

After much reading AFAIK it's currently not possible:
http://www.magiclantern.fm/forum/index.php?topic=5810.0

RenatoPhoto

Quote from: senzazn12 on May 31, 2013, 04:06:57 PM
Guys I'm a total noob here and this is my first post on here. First of all I want to extend my thanks to Alex and the rest of the ML team for putting forth their time and effort in putting such AMAZING and INCREDIBLE software on our DSLR's. I have a
Canon 5D Mark III and I was able to successfully install the May 29th build on my 5D3 yesterday morning. My question is how do I update to the May 30th build? Do I just replace the autoexec.bin file from my May 29th build to the new May 30th build or do I need to copy all the files from the new build to my CF card? Forgive me in advance if this question does not belong here. Thank you all.

You can find your answer here:

RAW video & ML -- Beginners Guide and FAQ -- READ FIRST
http://www.magiclantern.fm/forum/index.php?topic=5520.0

Go to the section :  FINALLY INSTALLATION OF RAW VIDEO

Next go here for the latest compiles (this is from above guide)

5D3 -- Newest compiled nightly Builds:
HERE: http://www.magiclantern.fm/forum/index.php?topic=5413.0

Finally please read our Forum Rules, we really want you to follow them carefully to help the developers here:
Magic Lantern Forum Rules
http://www.magiclantern.fm/forum/index.php?topic=934.msg1141#msg1141
http://www.pululahuahostal.com  |  EF 300 f/4, EF 100-400 L, EF 180 L, EF-S 10-22, Samyang 14mm, Sigma 28mm EX DG, Sigma 8mm 1:3.5 EX DG, EF 50mm 1:1.8 II, EF 1.4X II, Kenko C-AF 2X

senzazn12

Thanks Renato. I won't do it again. Appreciate it.

arturochu

Just shot a 1min commercial with the raw hack, full day using the camera, not a single problem with the camera, only problem with ml is that i couldn't show playback through an external monitor, other than that, everything worked fine.
Chu

arturochu

We'll be starting post next monday, i'll keep you updated with the process.
Chu

jakdaniel1975

Hello yesterday I shot a video for a band I have performed around 500 gb of shooting and also I just wanted to ask if any problem in future versions you can put option to disable the frame counter and SIZES during recording that disturbs a lot in shooting ... . thanks

arturochu

thats right, they are kind of disturbing, but at least you a 100% sure you are recording in raw.
Chu

a1ex

We don't consider it ready for production, so the debug info will stay there for now.

squig

I found a way to break the file browser. Pull the trigger on the shutter in playback mode and watch all hell break loose :D (don't try this at home kids)

Peter Linov


NitromanX

@ Peter Linov - Wow ! Those bugs are pretty scary and all hairy up close Peter !  ;D

Pretty footage tho ... amazing detail.

Why not shooting raw at full HD 1920 x 1080 - I thought this was already possible on the 5D3 ?

Peter Linov


mesebar2

Hi everybody, i encountered a problem!!!
I am using the 29th May build.
For the first time i recorded one take passing the 4GB limit, which i understood as not being a problem anymore with the newer builds.
I found the split files and merged them just the way RenatoPhoto suggests ( Rename files as file.001, file.002
Download file joiner splitter such as FFSJ v 3.3
http://www.softpedia.com/get/File-managers/File-Splitter-and-Joiner.shtml ).
When i then try to process my new joined file with RAWanizer (the same happens if i try with the new Raw2Dng instead), the dng files i receive are perfect until it reaches the 1183rd frame (1183*3,5Mb = 4GB) and since then i get only pixelated dngs up to the end (those dngs open perfectly, they simply show a pixelated pink frame)

Thank you for your help

p.s: if this question has already been discussed or solved, i apologize. I am trying to keep up with what's going on in the forum, but every day there are lots of new threads and posts and i could not find and answer so i thought i would ask for your help here

RenatoPhoto

Quote from: mesebar2 on June 04, 2013, 02:20:08 AM
p.s: if this question has already been discussed or solved, i apologize. I am trying to keep up with what's going on in the forum, but every day there are lots of new threads and posts and i could not find and answer so i thought i would ask for your help here

Yes, download the latest compile here:
http://www.magiclantern.fm/forum/index.php?topic=5413.msg45614#msg45614
http://www.pululahuahostal.com  |  EF 300 f/4, EF 100-400 L, EF 180 L, EF-S 10-22, Samyang 14mm, Sigma 28mm EX DG, Sigma 8mm 1:3.5 EX DG, EF 50mm 1:1.8 II, EF 1.4X II, Kenko C-AF 2X

Krautgamer

Filmed this with the June 3rd Firmware.



A bit of CC and a bit of sharpening was applied. The sensor noise worried me a bit, but the result came out pretty nice. :)

knavekrazzy4

A quick raw video test from India! Used the June 3rd compile by Lourenco! I pulled all the details from highlights and shadows even when i saw noise\grain appearing, as I wanted to actually see how much I could get out from the RAW.

mesebar2