uncompressed 14-bit RAW video recording

Started by g3gg0, April 27, 2013, 12:07:12 AM

Previous topic - Next topic

0 Members and 3 Guests are viewing this topic.

Colemar

Quote from: coutts on May 14, 2013, 12:49:27 AM
This should work for 5d2, double buffering enabled:
http://bit.ly/10TBM7a

extract the MODULES directory into /ML/ on your card

coutts,
  thank you for the post.  unfortunately that was a small step backwards for me as now an error message is generated when attempting to load the module.  I do not know how to attach things or I would include a .422 screenshot...

QuoteASSERT: IsSuiteSignature( hSuite )
at ./PackMemory/PackMem.c:599, task RscMgr
lv:1 mode:3


Magic Lantern version : v2.3.NEXT.2013May13.5D3113
Mercurial changeset   :
Built on 2013-05-12 21:25:54 by magiclantern@magiclantern-VirtualBox.
Free Memory  : 145K + 3731K

and

QuoteASSERT: 0
at ./Memory/Memory.c:568, task RscMgr
lv:1 mode:3


Magic Lantern version : v2.3.NEXT.2013May13.5D3113
Mercurial changeset   :
Built on 2013-05-12 21:25:54 by magiclantern@magiclantern-VirtualBox.
Free Memory  : 145K + 3874K


-Colemar

bumkicho

Is lourenco back with newly compiled 5D3 files? Or can anyone else post them please?

coutts

Quote from: Colemar on May 14, 2013, 01:45:36 AM
coutts,
  thank you for the post.  unfortunately that was a small step backwards for me as now an error message is generated when attempting to load the module.  I do not know how to attach things or I would include a .422 screenshot...

and


-Colemar
use the autoexec.bin in that zip.

TonesProtege

Thanks coutts, your link worked. However I'm now having trouble getting raw2dng to work. I DL'ed crossover, but i cant seem to get it to open my m0000.raw files. Any chance any of y'all could help me understand how to get that to work? I'm on a Mac.

Jake

noisyboy

Quote from: Rush on May 13, 2013, 06:59:42 PM
helps when Global Draw is off

Can confirm I too had increased performance with global draw off.

Colemar

Quote from: coutts on May 14, 2013, 02:02:07 AM
use the autoexec.bin in that zip.

on the 5DmkIII with that autoexec.bin the camera will not start up.  When reverting to lorenco's autoexec.bin and using the modules you provided, the error messages appear.  When reverting everything to lourenco's build, the camera functions properly but there is some image tearing.  Just to make sure, the autoexec.bin and modules you kindly provided are for the mkIII ?

coutts

Quote from: Colemar on May 14, 2013, 02:10:13 AM
on the 5DmkIII with that autoexec.bin the camera will not start up.  When reverting to lorenco's autoexec.bin and using the modules you provided, the error messages appear.  When reverting everything to lourenco's build, the camera functions properly but there is some image tearing.  Just to make sure, the autoexec.bin and modules you kindly provided are for the mkIII ?
the filename says 5d2, of course it won't work on the 5d3.

lourenco

Quote from: bumkicho on May 14, 2013, 01:53:28 AM
Is lourenco back with newly compiled 5D3 files? Or can anyone else post them please?
working on it. Just came home from work.
5D Mark III, CF Lexar 1000X 32GB, 24-105 F4L

Colemar


aaphotog

Quote from: eatstoomuchjam on May 14, 2013, 01:19:35 AM
You wouldn't drag it into the terminal.  Assuming that it's in your Downloads folder, you'd go into Terminal and run this:


cd ~/Downloads
chmod +x ./raw2dng
./raw2dng


To use it on a file in another folder, go to terminal and do something like this:

cd /Path/To/Folder
~/Downloads/raw2dng M00000000.RAW


It says "illegal instruction" when I try that. I put the raw2dng file in my downloads just to try it this way.

bumkicho

Is anyone using Lexar 1000x card on 5D3? I am wondering if full 1080P is stable with this card. Or even higher?

lourenco

5D Mark III, CF Lexar 1000X 32GB, 24-105 F4L

ted ramasola

Can a moderator change the title of this fast growing thread to REMOVE the YUV422 and just leave 14bit Raw video recording?

This thread is being referenced to in blogs, news, webpages, social media, all around the world and its adding to confusion when some refer to the raw video as yuv422.
5DmkII  / 7D
www.ramasolaproductions.com
Texas

lourenco

Quote from: bumkicho on May 14, 2013, 02:39:31 AM
Is anyone using Lexar 1000x card on 5D3? I am wondering if full 1080P is stable with this card. Or even higher?
It works fine for me at 1080p. I have not tried anything higher yet.
5D Mark III, CF Lexar 1000X 32GB, 24-105 F4L

Colemar

In my brief testing the Lexar 1000x  is not stable at higher than 1920x1080 @23.976 

thank you lourenco, I will be testing the Lexar 1000x, Sandisk 100MB/s, and Delkin 1000x on the 5DmkIII tonight and will post back results asap


lourenco

Quote from: squig on May 14, 2013, 02:48:55 AM
Fonts are missing?
I will re-upload. You would just want to replace your existing files with this one. Do not delete your existing ML dir. I will make it complete for you. one moment.
5D Mark III, CF Lexar 1000X 32GB, 24-105 F4L

squig

Quote from: lourenco on May 14, 2013, 02:51:46 AM
I will re-upload. You would just want to replace your existing files with this one. Do not delete your existing ML dir. I will make it complete for you. one moment.

Ahh yeah I just noticed you only put the modules folder in. No problem. Thanks.

Rush

Canon 600D RAW video test footage 1280x360 25p:

Not so compressed version with more details: http://bit.ly/YFM92c

Thanks to 1% for 600D version. I tested "[600D] Stick to 1280".
It sometimes shows many corrupted frames + looks like when accessing ML menu it adds some garbage to frame. In video above I just took clean part of full video.
Can I request you to add 400px height? It seems like max possible and optimal for 600D is 1280x400 - tight 3.2:1 aspect. (960 width is good for achieving 16:9 - 960x540 but have more moire)
Can I request you to add 1280x720 lineskipped to 1280x360? So it will be nice 16:9 when stretched back to 1280x720 (it will look like 720i with one field discarded and second interpolated in post).
Is line skipping possible with RAW?
Greetings from Russia!

N/A

Looks like raw can run continuously on the 600D at 960x540 (at work now so I can't double check) with a Sandisk 95. So how about 1280x480 or 360? Not sure if frames were corrupting yet, I'll run more tests in the morning.

Oh and from what I've seen, raw video has a nice film look to it color-wise, especially on landscape shots. The stock codec looks extremely "digital" next to it.  This makes me happy.

:D

Looks like my question was just answered lol
7D. 600D. Rokinon 35 cine. Sigma 30 1.4
Audio and video recording/production, Random Photography
Want to help with the latest development but don't know how to compile?


Yoshiyuki Blade

Quote from: coutts on May 14, 2013, 12:49:27 AM
This should work for 5d2, double buffering enabled:
http://bit.ly/10TBM7a

extract the MODULES directory into /ML/ on your card

Aw yeah, thanks coutts! I'm testing the waters atm but if all goes well, I'm going to find something with a lot of detail to share with everyone. Today isn't breezy so no swaying tree leaves. I'll probably record sprinkler droplets or something.

lourenco

Quote from: ted ramasola on May 13, 2013, 04:50:21 AM
wow... just wow. So raw recording can record now sound? Is it 44khz or 48khz?
I can record sound now to the SD card. I did a quick test. I did not want to change any code. I went to the canon menu set up1 and selected record to sd card. I went to magic lantern menu for sound recorder. I started sound recorder. I went back to same canon menu before put back to cf card. I was able to record video at 1080p. This means it is possible. The issue is when I start video recording the audio switch from 48hz to 96hz for some reason. I had to change the sample rate to 96hz to play back the audio correctly.
5D Mark III, CF Lexar 1000X 32GB, 24-105 F4L

bumkicho

Hmm.. with the current version, I get drop frames at 1280x720. I used to get stable 1280x720 with previous version. Is this expected?

squig

Quote from: bumkicho on May 14, 2013, 03:09:24 AM
Hmm.. with the current version, I get drop frames at 1280x720. I used to get stable 1280x720 with previous version. Is this expected?

Is global draw off? It's working fine for me with a 600x Lexar