« previous next »
Pages: 1 2 [3] 4 5

Author Topic: [UNBRICKED] Bricked 60D Err 70  (Read 131217 times)

time_hugo

  • New to the forum
  • *
  • Posts: 6
Re: [UNBRICKED] Bricked 60D Err 70
« Reply #50 on: July 30, 2014, 11:50:48 PM »
finally I got my 60D working now.
i gave to repair for fix. the guy who is the fixed my camera said "your camera has beed dropped and lose 1 small screw, then contact with 3 small chip and bugged them off"
i glad to get my camera back now.
thanks all
Logged

cachalote

  • New to the forum
  • *
  • Posts: 2
Re: [UNBRICKED] Bricked 60D Err 70
« Reply #51 on: July 31, 2014, 06:14:06 PM »
Hi there,

I want to thank A1ex!!!!!

Today I went to pick up the 60D to SAT. The repairs totaled over 750 € (Change main control circuit, main electronic circuit, and the reflex box). The technician told me that the camera was dead, the water had corroded all circuits.

How can it be when the camera turns on in "C" and it works perfectly in this position?

When I come home, I have implemented your solution with the "autoexec, bin" who sent me and ...... eureka!, The camera works 100%.

I want to thank you for your help.

Here's a friend.

a greeting
Logged

Ibnu

  • New to the forum
  • *
  • Posts: 2
Re: [UNBRICKED] Bricked 60D Err 70
« Reply #52 on: August 15, 2014, 11:24:01 AM »
Dear Alex.

i`m a new member in ML forum. I have got problem like parmadi. my 60d got erorr 70. when in the middle of shooting my 60d erorr and i try to change battery and remove SD card, and the totally died and couldnt show everything.

i feel i got different problem then the others, but i want to try ML to handle this problem

can you share autoexec to zeroartstudio31@gmail
thanks before

Logged

Walter Schulz

  • Contributor
  • Hero Member
  • *****
  • Posts: 8602
Re: [UNBRICKED] Bricked 60D Err 70
« Reply #53 on: August 15, 2014, 11:29:58 AM »
Write a PM ...
Logged

Ibnu

  • New to the forum
  • *
  • Posts: 2
Re: [UNBRICKED] Bricked 60D Err 70
« Reply #54 on: August 18, 2014, 07:56:14 AM »
HELLO admin.. the message has not get in my inbox. please send it again
Logged

SauliusFoto

  • New to the forum
  • *
  • Posts: 2
Re: [UNBRICKED] Bricked 60D Err 70
« Reply #55 on: August 20, 2014, 02:09:02 PM »
I've got 60D Err70 after light rain. Installed ML. Now I have logs. Wrote to Alex PM. Hope he will help.

ASSERT: FALSE
at DevelopCombination.c:108, task RscMgr
lv:0 mode:0

Magic Lantern version : v2.3.60D.111
Mercurial changeset   : 7fee07c3b461+ (unified) tip
Built on 2012-07-23 16:06:13 by alex@thinkpad.
Free Memory  : 152K + 1341K


Code: [Select]
Wed Aug 20 14:13:01 2014
      0:    11.695 [STARTUP]
K287 ICU Firmware Version 1.1.1 ( 3.3.7 )
      1:    11.754 [STARTUP]
ICU Release DateTime 2012.05.14 13:18:25
      2:    12.021 [SEQ] CreateSequencer (Startup, Num = 6)
      3:    12.258 [SEQ] NotifyComplete (Cur = 0, 0x10000, Flag = 0x10000)
      4:    13.356 [SEQ] seqEventDispatch (Startup, 0)
      5:    13.381 [STARTUP] startupEntry
      6:    50.322 [PROPST] Initialize Adjective & Situation
      7:    50.639 [HPD] # 1 0 1
      8:    53.588 [PROPST] Clear Adjective & Situation (StartupCondition)
      9:    53.962 [PROPST] AEMode New:0 Last:0
     10:    54.041 [PROPST] Active Adjective & Situation
     11:    54.158 [PROPST] ReqChangeCBR : Adjective 0, 0
     12:    54.194 [PROPST] Not ExecMultiConvert Already None : Adjective 0, 0
     13:    54.267 [PROPST] Not ExecMultiConvert : Situation 0
     14:    54.325 [PROPST]  CurrentAdjective 0 0
     15:    55.173 [HPD] CreateTask Master End
     16:    56.373 [EM] emSlaveChangeCBR : AUTO_POWEROFF (1)
     17:    56.494 [EM] emSlaveChangeCBR : UILOCK (0x0)
     18:    56.866 [HPD] ERASE SW OFF
     19:   107.744 [STARTUP] startupPropAdminMain : End
     20:   107.817 [SEQ] NotifyComplete (Cur = 1, 0x20000002, Flag = 0x20000000)
     21:   120.044 [SEQ] NotifyComplete (Cur = 1, 0x2, Flag = 0x2)
     22:   120.480 [PROPST] AEMode New:0 Last:0
     23:   120.872 [PRP] Deliv WaitID = 0x80000001, 0xFF1B8BF8(1)
     24:   121.283 [PRP] Complete WaitID = 0x80000001, 0xFF1B8BF8(0)
     25:   121.402 [PRP] SpecialComplete ID = 0x80000001, 0x80000001 1034
     26:   121.953 [SEQ] seqEventDispatch (Startup, 1)
     27:   121.989 [STARTUP] startupPrepareProperty
     28:   122.555 [PRP] MovieParamData
     29:   122.631 [PRP] mode 0 size 0x0 , framerate 0x1e , type 0xf zoom 0x0
     30:   123.321 [FM] FM_Initialize (0, 1, 0)
     31:   124.312 [FM] fmResultCBR (0x80e304)
     32:   125.108 [FM] PROP_HDD_DCIM_PATH (/)
     33:   125.726 [PRP] Complete WaitID = 0x8000003F, 0x00000000(0)
     34:   125.878 [FC] FC_Initialize [drive:3][ClassID:39]
     35:   126.236 [PROPST] AEMode New:7 Last:0
     36:   126.270 [PROPST] FromSaveTimming = 2(489)
     37:   128.535 [FM] PROP_CARD1_STATUS = 0x1
     38:   128.937 [FM] PROP_CARD1_FOLDER_NUMBER = 142
     39:   129.057 [FM] PROP_CARD1_FILE_NUMBER = 0
     40:   129.146 [FM] PROP_CARD2_STATUS = 0x1
     41:   129.220 [FM] PROP_CARD2_FOLDER_NUMBER = 100
     42:   129.277 [FM] PROP_CARD2_FILE_NUMBER = 7394
     43:   129.350 [FM] PROP_CARD3_EXIST = 0
     44:   129.385 [FM] PROP_CARD3_STATUS = 0x1
     45:   129.457 [FM] PROP_CARD3_RECORD = 0 => 0
     46:   129.516 [FM] PROP_CARD3_FOLDER_NUMBER = 100
     47:   129.568 [FM] PROP_CARD3_FILE_NUMBER = 0
     48:   129.635 [FM] PROP_FILE_NUMBERING_MODE = 1, 0
     49:   129.676 [FM] PROP_CARD_EXTENSION = 191
     50:   129.714 [FM] PROP_CURRENT_MEDIA = 2
     51:   129.749 [FM] PROP_USBDEVICE_CONNECT = -1
     52:   129.788 [FM] PROP_NUMBER_OF_CONTINUOUS_MODE = 7394
     53:   129.821 [SEQ] NotifyComplete (Cur = 2, 0x10, Flag = 0x10)
     54:   129.911 [FM] PROP_DSDEFINE ModelId 80000287
     55:   129.960 [FM] PROP_FILE_NUMBERING_MODE = 1, 7394
     56:   130.016 [SEQ] seqEventDispatch (Startup, 2)
     57:   130.035 [STARTUP] startupPrepareCapture
     58:   130.573 [RSC] hMemoryQueue (0x620010) hStorageQueue (0x640012)
     59:   131.706 [RSC] AllocateMemoryUnit For ExMem1
     60:   131.730 [RSC] AllocateMemoryUnit For ExMem1_2
     61:   131.750 [RSC] AllocateMemoryUnit For OnlyMem1
     62:   132.524 [RSC] MemMgr(IMAGE) 0 2
     63:   132.549 [RSC] MemMgr(IMAGE) 0 0
     64:   132.570 [RSC] MemMgr(IMAGE) 0 7
     65:   132.588 [RSC] MemMgr(IMAGE) 0 0
     66:   132.646 [RSC] PROP_MEMORY_STATUS(SELF) (0->)3 (OTHER) 3
     67:   132.662 [RSC] Deliver PROP_MEMORY_STATUS 3
     68:   133.133 [RSC] SRMExMem1_1State Event 0 Result State 0->6
     69:   133.166 [RSC] hExMem1_2StateObject Through Event 0 State 0
     70:   133.608 [RSC] SRMExMem1_1State Event 4 Result State 6->6
     71:   133.641 [RSC] hExMem1_2StateObject Through Event 4 State 0
     72:   134.298 [RSC] this->dwCardStatus[0] = 0x1(552)
     73:   134.907 [RSC] this->dwCardStatus[1] = 0x1(552)
     74:   135.495 [RSC] this->dwCardStatus[2] = 0x1(552)
     75:   136.088 [RSC] PROP_PC_HDD_STATUS = 0x1
     76:   136.892 [RSC] NO IMAGEFORMAT EstimatedSize.c 113
     77:   136.924 [RSC] NO IMAGEFORMAT EstimatedSize.c 113
     78:   136.959 [RSC] ERROR SetDevelopImageCondition DevelopCombination.c 107
     79:   137.895 [RTC] !! RTC CHECK ERROR !!

     80:   139.663 [EM] emRegisterMulticastCallback : EventID = 14, ClassID = 128
     81:   139.832 [EM] emRegisterMulticastCallback : EventID = 15, ClassID = 128
     82:   139.953 [EM] emRegisterMulticastCallback : EventID = 4, ClassID = 128
     83:   140.653 [JOB] InitializeJobClass (ID = 11903, Num = 17)
     84:   140.865 [JOB] [BIND] dcsResultCBR (0x931980)
     85:   141.044 [JOB] PROP_CFN_TAB2 209 204
     86:   142.560 [CERES]  RegisterGPSInfoCallback
     87:   143.092 [EM] emLockControl (TYPE_JOBSTATE = 0x0)
     88:   143.929 [JOB] InitializeInnerDevelopJobClass (ID = 11903, Num = 16)
     89:   143.961 [JOB] InitializeMultipleExposureSaveAndEndJobClass ( Num = 10 )
     90:   144.302 [STARTUP] ERROR ASSERT : DevelopCombination.c, Task = RscMgr
     91:   144.361 [STARTUP] ERROR ASSERT : Line 108
     92:   144.398 [STARTUP] ERROR ASSERT : FALSE
     93:   144.470 [STARTUP] ASSERT Time 1899/12/31 0:0:0
     94:   144.865 [STARTUP] startupErrorRequestChangeCBR (0x1d)
     95:   144.957 [STARTUP] startupErrorRequestChangeCBR : ErrorSend (101, ABORT)
     96:   146.183 [SND] Seq LPC 5-0
     97:   146.228 [SND]  HARB_ARBMODE  Before:0x00000000 Current:0x00000000
     98:   146.265 [SND]  HARB_HARBCTRL Before:0x002AEAA8 Current:0x002AEAA8
     99:   146.275 [SND] Seq LPC 5-1
    100:   146.311 [SND] Seq LPC 5-2
    101:   146.350 [SND] Seq LPC 5-3
    102:   146.370 [SND] Seq LPC 5-4
    103:   146.379 [SND] Seq LPC 5-5
    104:   146.402 [SND] Seq LPC 5-6
    105:   146.755 [SND] Seq LPC 5-7
    106:   146.777 [SND] Seq LPC fin
    107:   147.774 [SEQ] NotifyComplete (Cur = 3, 0xe0110, Flag = 0x40000)
    108:   147.956 [EM] emRegisterMulticastCallback : EventID = 14, ClassID = 147
    109:   148.111 [EM] emRegisterMulticastCallback : EventID = 2, ClassID = 147
    110:   148.249 [EM] emRegisterMulticastCallback : EventID = 3, ClassID = 147
    111:   148.381 [EM] emRegisterMulticastCallback : EventID = 15, ClassID = 147
    112:   148.508 [EM] emRegisterMulticastCallback : EventID = 5, ClassID = 147
    113:   148.629 [EM] emRegisterMulticastCallback : EventID = 6, ClassID = 147
    114:   148.745 [EM] emRegisterMulticastCallback : EventID = 1, ClassID = 147
    115:   148.874 [EM] emRegisterMulticastCallback : EventID = 4, ClassID = 147
    116:   148.987 [EM] emRegisterMulticastCallback : EventID = 8, ClassID = 147
    117:   149.102 [EM] emRegisterMulticastCallback : EventID = 9, ClassID = 147
    118:   149.216 [EM] emRegisterMulticastCallback : EventID = 10, ClassID = 147
    119:   149.333 [EM] emRegisterMulticastCallback : EventID = 17, ClassID = 147
    120:   149.555 [SHTC] scsInit
    121:   150.548 [ENG] [ENGIO](Addr:0x5c880000, Data:0x   30000)
    122:   156.209 [SEQ] NotifyComplete (Cur = 3, 0xa0110, Flag = 0x80000)
    123:   156.377 [SHTB] sbsInit
    124:   156.581 [SHTB] VShadingAddress:0x5c8c9960, Size:901120
    125:   157.232 [SHTP] spsInit
    126:   157.310 [FM] FM_RegisterSpaceNotifyCallback
    127:   157.416 [MRK] RegisterSpaceNotifyCallback : DriveNo = 2
    128:   157.451 [FM] voiRegisterSpaceNotifyCallback : DriveNo = 2
    129:   157.474 [FM] RegisterSpaceNotifyCallback : DriveNo = 2
    130:   157.528 [FC] FcmcRegisterSpaceNotifyCallback : DriveNo = 2
    131:   157.545 [FM] FM_RegisterSpaceNotifyCallback
    132:   157.743 [SEQ] NotifyComplete (Cur = 3, 0x20110, Flag = 0x100)
    133:   157.849 [WFT]  TOM_Initialize
    134:   158.564 [EM] emRegisterMulticastCallback : EventID = 0, ClassID = 158
    135:   158.741 [EM] emRegisterMulticastCallback : EventID = 1, ClassID = 158
    136:   158.870 [EM] emRegisterMulticastCallback : EventID = 4, ClassID = 158
    137:   159.443 [EM] emRegisterMulticastCallback : EventID = 0, ClassID = 167
    138:   159.834 [EM] emRegisterMulticastCallback : EventID = 11, ClassID = 167
    139:   159.866 [EM] Already SW1OFF
    140:   159.985 [MC] cam event metering timer start
    141:   160.129 [EM] emRegisterMulticastCallback : EventID = 7, ClassID = 167
    142:   160.269 [EM] emRegisterMulticastCallback : EventID = 1, ClassID = 167
    143:   160.401 [EM] emRegisterMulticastCallback : EventID = 4, ClassID = 167
    144:   160.521 [EM] emRegisterMulticastCallback : EventID = 3, ClassID = 167
    145:   160.633 [EM] emRegisterMulticastCallback : EventID = 2, ClassID = 167
    146:   160.747 [EM] emRegisterMulticastCallback : EventID = 18, ClassID = 131
    147:   160.863 [EM] emRegisterMulticastCallback : EventID = 19, ClassID = 131
    148:   161.372 [EM] emRegisterMulticastCallback : EventID = 13, ClassID = 167
    149:   161.476 [TA10] TA10_Initialize : Start
    150:   161.883 [TA10] TA10S_Initialize : Start
    151:   161.917 [TA10] TA10S_Initialize : CreateStageClass
    152:   162.147 [TA10] TA10S_Initialize : End
    153:   162.263 [TA10] TA10_Initialize : End
    154:   162.483 [FM] fmInitialized
    155:   162.571 [FC] _FC_SetDirSuffix (CANON)
    156:   162.653 [FC] _FC_SetConsecutiveMode (mode = 1, DCF = 7394)
    157:   162.763 [FM] fmPrepare
    158:   164.348 [FM] ALV_Initialize (36, 25)
    159:   164.685 [FM] fmAllocDcfNo(0x80e0c0)(0x0)
    160:   175.111 [TERM] terminateChangeCBR : SHUTDOWN (255)
    161:   175.144 [TERMINATE] SHUTDOWN init comp
    162:   175.303 [TERM] terminateChangeCBR : AUTO_POWEROFF (1)
    163:   175.415 [TERMINATE] Abort init comp
    164:   175.899 [WFT]  PROP_WFT_IMAGE_TRANS (1)
    165:   177.900 [MC] PROP_DISPLAY_OFF_SENSOR : 1
    166:   178.166 [MC] DisplaySensor : 1(0)
    167:   179.006 [MC] PROP_GUI_STATE 0
    168:   179.166 [MC] PROP_LV_ACTION : LV_STOP
    169:   179.262 [MC] PROP_LV_DISPBUSY : not Busy
    170:   179.355 [MC] PROP_LV_LOCK : LVLOCK_PERMIT
    171:   179.484 [MC] PROP_DISABLE_PLAY_IMAGE : Enable Play
    172:   179.584 [MC] JobState 0
    173:   180.629 [MC] QRTime : 2
    174:   180.951 [MC] PROP_VARIANGLE_GUICTRL : Enable
    175:   181.259 [MC] regist master CardCover
    176:   182.124 [TA10] ta10_ChangePropCBR ShotsPlan 10 / TotalSheets 10
    177:   183.786 [PRP] MovieParamData
    178:   183.871 [PRP] mode 0 size 0x0 , framerate 0x1e , type 0xf zoom 0x0
    179:   184.858 [JOB] PROP_CFN_TAB2 0 0
    180:   185.064 [MC] GuiGroundState : 0
    181:   185.548 [MC] PROP_LV_ACTION : LV_STOP
    182:   188.094 [SHTC] Mem1Component Size=0x37a54
    183:   188.772 [SHTC] DarkcurAddress:0x5c9a5960, Size:131072
    184:   188.863 [SHTC] scsProperty ID=0x0(0x80)
    185:   188.916 [SHTC] scsProperty ID=0x80040004(0x0)
    186:   192.244 [WFT]  tomSetRawJpgMode (Type = 0x4)
 
Logged

SauliusFoto

  • New to the forum
  • *
  • Posts: 2
Re: [UNBRICKED] Bricked 60D Err 70
« Reply #56 on: August 21, 2014, 01:43:12 PM »
I want to thank a1ex for help. Another success story :)
Logged

bpress

  • New to the forum
  • *
  • Posts: 7
Re: [UNBRICKED] Bricked 60D Err 70
« Reply #57 on: October 03, 2014, 05:19:52 PM »
I'm asking anybody who knows how to help if they could take some time and walk me through correcting error 70 on my Canon 60D.

The camera is approximately 2 1/2 years old, he was working fine until about a month ago when I got some water splashed on it. When the cameras turned on it flashes error 70. I read through his many posts on this form as I could and like so many of the people I learned that if I turned the camera on in auto mode, switched to C mode, then turned the camera off and on again the camera would start up normally in C mode. As soon as I switch to any other mode it goes back to error 70.

The firmware was 1.1 .0 so I upgraded to 1.1.1 and installed MagicLantern. Below is the error log. Like so many other people that I've read about on this form there are errors in the Asserts. I've read that there is an autoexec.bin file that lets you bypass the asserts handlers so that the error can be cleared. If somebody has to file and is willing to take some time to walk me through unbricking my camera I would be extremely grateful. You can contact me at benet.press@gmail.com.

Thanks in advance!


Thu Oct  2 21:17:32 2014
      0:    11.679 [STARTUP]
K287 ICU Firmware Version 1.1.1 ( 3.3.7 )
      1:    11.739 [STARTUP]
ICU Release DateTime 2012.05.14 13:18:25
      2:    11.993 [SEQ] CreateSequencer (Startup, Num = 6)
      3:    12.226 [SEQ] NotifyComplete (Cur = 0, 0x10000, Flag = 0x10000)
      4:    13.312 [SEQ] seqEventDispatch (Startup, 0)
      5:    13.335 [STARTUP] startupEntry
      6:    50.263 [PROPST] Initialize Adjective & Situation
      7:    50.594 [HPD] # 1 1 1
      8:    53.461 [PROPST] Clear Adjective & Situation (StartupCondition)
      9:    53.947 [PROPST] AEMode New:0 Last:0
     10:    54.033 [PROPST] Active Adjective & Situation
     11:    54.141 [PROPST] ReqChangeCBR : Adjective 0, 0
     12:    54.176 [PROPST] Not ExecMultiConvert Already None : Adjective 0, 0
     13:    54.253 [PROPST] Not ExecMultiConvert : Situation 0
     14:    54.316 [PROPST]  CurrentAdjective 0 0
     15:    54.980 [HPD] Variangle State 2
     16:    55.438 [HPD] CreateTask Master End
     17:    56.633 [EM] emSlaveChangeCBR : AUTO_POWEROFF (1)
     18:    56.765 [EM] emSlaveChangeCBR : UILOCK (0x0)
     19:    57.097 [HPD] ERASE SW OFF
     20:   107.840 [STARTUP] startupPropAdminMain : End
     21:   107.918 [SEQ] NotifyComplete (Cur = 1, 0x20000002, Flag = 0x20000000)
     22:   118.543 [SEQ] NotifyComplete (Cur = 1, 0x2, Flag = 0x2)
     23:   118.985 [PROPST] AEMode New:0 Last:0
     24:   119.384 [PRP] Deliv WaitID = 0x80000001, 0xFF1B8BF8(1)
     25:   119.806 [PRP] Complete WaitID = 0x80000001, 0xFF1B8BF8(0)
     26:   119.907 [PRP] SpecialComplete ID = 0x80000001, 0x80000001 1034
     27:   120.466 [SEQ] seqEventDispatch (Startup, 1)
     28:   120.500 [STARTUP] startupPrepareProperty
     29:   121.012 [PRP] MovieParamData
     30:   121.085 [PRP] mode 0 size 0x0 , framerate 0x1e , type 0xf zoom 0x0
     31:   121.616 [FM] FM_Initialize (0, 1, 0)
     32:   122.824 [FM] fmResultCBR (0x80e2a4)
     33:   123.659 [FM] PROP_HDD_DCIM_PATH (/)
     34:   124.087 [PROPST] AEMode New:7 Last:0
     35:   124.119 [PROPST] FromSaveTimming = 2(489)
     36:   124.937 [PRP] Complete WaitID = 0x8000003F, 0x00000000(0)
     37:   126.274 [FC] FC_Initialize [drive:3][ClassID:39]
     38:   126.473 [FM] PROP_CARD1_STATUS = 0x1
     39:   126.563 [FM] PROP_CARD1_FOLDER_NUMBER = 142
     40:   126.627 [FM] PROP_CARD1_FILE_NUMBER = 0
     41:   126.710 [FM] PROP_CARD2_STATUS = 0x1
     42:   126.774 [FM] PROP_CARD2_FOLDER_NUMBER = 100
     43:   126.834 [FM] PROP_CARD2_FILE_NUMBER = 7231
     44:   126.899 [FM] PROP_CARD3_EXIST = 0
     45:   126.929 [FM] PROP_CARD3_STATUS = 0x1
     46:   126.967 [FM] PROP_CARD3_RECORD = 0 => 0
     47:   126.999 [FM] PROP_CARD3_FOLDER_NUMBER = 100
     48:   127.042 [FM] PROP_CARD3_FILE_NUMBER = 0
     49:   127.103 [FM] PROP_FILE_NUMBERING_MODE = 1, 0
     50:   127.144 [FM] PROP_CARD_EXTENSION = 192
     51:   127.183 [FM] PROP_CURRENT_MEDIA = 2
     52:   127.221 [FM] PROP_USBDEVICE_CONNECT = -1
     53:   127.264 [FM] PROP_NUMBER_OF_CONTINUOUS_MODE = 7231
     54:   127.302 [SEQ] NotifyComplete (Cur = 2, 0x10, Flag = 0x10)
     55:   127.404 [FM] PROP_DSDEFINE ModelId 80000287
     56:   127.463 [FM] PROP_FILE_NUMBERING_MODE = 1, 7231
     57:   127.522 [SEQ] seqEventDispatch (Startup, 2)
     58:   127.539 [STARTUP] startupPrepareCapture
     59:   128.129 [RSC] hMemoryQueue (0x620010) hStorageQueue (0x640012)
     60:   129.288 [RSC] AllocateMemoryUnit For ExMem1
     61:   129.312 [RSC] AllocateMemoryUnit For ExMem1_2
     62:   129.330 [RSC] AllocateMemoryUnit For OnlyMem1
     63:   130.155 [RSC] MemMgr(IMAGE) 0 2
     64:   130.188 [RSC] MemMgr(IMAGE) 0 0
     65:   130.212 [RSC] MemMgr(IMAGE) 0 7
     66:   130.232 [RSC] MemMgr(IMAGE) 0 0
     67:   130.291 [RSC] PROP_MEMORY_STATUS(SELF) (0->)3 (OTHER) 3
     68:   130.307 [RSC] Deliver PROP_MEMORY_STATUS 3
     69:   130.782 [RSC] SRMExMem1_1State Event 0 Result State 0->6
     70:   130.810 [RSC] hExMem1_2StateObject Through Event 0 State 0
     71:   131.271 [RSC] SRMExMem1_1State Event 4 Result State 6->6
     72:   131.302 [RSC] hExMem1_2StateObject Through Event 4 State 0
     73:   131.971 [RSC] this->dwCardStatus[0] = 0x1(552)
     74:   132.595 [RSC] this->dwCardStatus[1] = 0x1(552)
     75:   133.215 [RSC] this->dwCardStatus[2] = 0x1(552)
     76:   133.909 [RSC] PROP_PC_HDD_STATUS = 0x1
     77:   134.855 [RSC] NO IMAGEFORMAT EstimatedSize.c 17
     78:   134.887 [RSC] NO IMAGEFORMAT EstimatedSize.c 17
     79:   134.924 [RSC] ERROR SetDevelopImageCondition DevelopCombination.c 107
     80:   135.964 [RTC] !! RTC CHECK ERROR !!

     81:   138.107 [EM] emRegisterMulticastCallback : EventID = 14, ClassID = 128
     82:   138.344 [EM] emRegisterMulticastCallback : EventID = 15, ClassID = 128
     83:   138.684 [EM] emRegisterMulticastCallback : EventID = 4, ClassID = 128
     84:   139.398 [JOB] InitializeJobClass (ID = 7360, Num = 17)
     85:   139.647 [JOB] [BIND] dcsResultCBR (0x932348)
     86:   139.825 [JOB] PROP_CFN_TAB2 0 0
     87:   141.326 [CERES]  RegisterGPSInfoCallback
     88:   141.859 [EM] emLockControl (TYPE_JOBSTATE = 0x0)
     89:   142.664 [STARTUP] ERROR ASSERT : DevelopCombination.c, Task = RscMgr
     90:   142.735 [STARTUP] ERROR ASSERT : Line 108
     91:   142.770 [STARTUP] ERROR ASSERT : FALSE
     92:   142.845 [STARTUP] ASSERT Time 1899/12/31 0:0:0
     93:   143.235 [STARTUP] startupErrorRequestChangeCBR (0x1d)
     94:   143.332 [STARTUP] startupErrorRequestChangeCBR : ErrorSend (101, ABORT)
     95:   143.689 [JOB] InitializeInnerDevelopJobClass (ID = 7360, Num = 16)
     96:   143.745 [JOB] InitializeMultipleExposureSaveAndEndJobClass ( Num = 10 )
     97:   144.878 [SND] Seq LPC 5-0
     98:   144.921 [SND]  HARB_ARBMODE  Before:0x00000000 Current:0x00000000
     99:   144.956 [SND]  HARB_HARBCTRL Before:0x002AEAA8 Current:0x002AEAA8
    100:   144.966 [SND] Seq LPC 5-1
    101:   145.004 [SND] Seq LPC 5-2
    102:   145.045 [SND] Seq LPC 5-3
    103:   145.066 [SND] Seq LPC 5-4
    104:   145.088 [SND] Seq LPC 5-5
    105:   145.100 [SND] Seq LPC 5-6
    106:   145.451 [SND] Seq LPC 5-7
    107:   145.462 [SND] Seq LPC fin
    108:   146.446 [SEQ] NotifyComplete (Cur = 3, 0xe0110, Flag = 0x40000)
    109:   146.630 [EM] emRegisterMulticastCallback : EventID = 14, ClassID = 147
    110:   146.802 [EM] emRegisterMulticastCallback : EventID = 2, ClassID = 147
    111:   146.925 [EM] emRegisterMulticastCallback : EventID = 3, ClassID = 147
    112:   147.056 [EM] emRegisterMulticastCallback : EventID = 15, ClassID = 147
    113:   147.189 [EM] emRegisterMulticastCallback : EventID = 5, ClassID = 147
    114:   147.317 [EM] emRegisterMulticastCallback : EventID = 6, ClassID = 147
    115:   147.448 [EM] emRegisterMulticastCallback : EventID = 1, ClassID = 147
    116:   147.578 [EM] emRegisterMulticastCallback : EventID = 4, ClassID = 147
    117:   147.699 [EM] emRegisterMulticastCallback : EventID = 8, ClassID = 147
    118:   147.819 [EM] emRegisterMulticastCallback : EventID = 9, ClassID = 147
    119:   147.939 [EM] emRegisterMulticastCallback : EventID = 10, ClassID = 147
    120:   148.055 [EM] emRegisterMulticastCallback : EventID = 17, ClassID = 147
    121:   148.221 [SHTC] scsInit
    122:   149.188 [ENG] [ENGIO](Addr:0x5c880000, Data:0x   30000)
    123:   154.888 [SEQ] NotifyComplete (Cur = 3, 0xa0110, Flag = 0x80000)
    124:   155.065 [SHTB] sbsInit
    125:   155.269 [SHTB] VShadingAddress:0x5c8c9960, Size:901120
    126:   155.935 [SHTP] spsInit
    127:   156.005 [FM] FM_RegisterSpaceNotifyCallback
    128:   156.116 [MRK] RegisterSpaceNotifyCallback : DriveNo = 2
    129:   156.156 [FM] voiRegisterSpaceNotifyCallback : DriveNo = 2
    130:   156.180 [FM] RegisterSpaceNotifyCallback : DriveNo = 2
    131:   156.233 [FC] FcmcRegisterSpaceNotifyCallback : DriveNo = 2
    132:   156.254 [FM] FM_RegisterSpaceNotifyCallback
    133:   156.456 [SEQ] NotifyComplete (Cur = 3, 0x20110, Flag = 0x100)
    134:   156.630 [WFT]  TOM_Initialize
    135:   157.308 [EM] emRegisterMulticastCallback : EventID = 0, ClassID = 158
    136:   157.483 [EM] emRegisterMulticastCallback : EventID = 1, ClassID = 158
    137:   157.605 [EM] emRegisterMulticastCallback : EventID = 4, ClassID = 158
    138:   158.377 [EM] emRegisterMulticastCallback : EventID = 0, ClassID = 167
    139:   158.547 [EM] emRegisterMulticastCallback : EventID = 11, ClassID = 167
    140:   158.578 [EM] Already SW1OFF
    141:   158.687 [MC] cam event metering timer start
    142:   158.818 [EM] emRegisterMulticastCallback : EventID = 7, ClassID = 167
    143:   158.937 [EM] emRegisterMulticastCallback : EventID = 1, ClassID = 167
    144:   159.053 [EM] emRegisterMulticastCallback : EventID = 4, ClassID = 167
    145:   159.178 [EM] emRegisterMulticastCallback : EventID = 3, ClassID = 167
    146:   159.289 [EM] emRegisterMulticastCallback : EventID = 2, ClassID = 167
    147:   159.406 [EM] emRegisterMulticastCallback : EventID = 18, ClassID = 131
    148:   159.570 [EM] emRegisterMulticastCallback : EventID = 19, ClassID = 131
    149:   160.100 [EM] emRegisterMulticastCallback : EventID = 13, ClassID = 167
    150:   160.199 [TA10] TA10_Initialize : Start
    151:   160.620 [TA10] TA10S_Initialize : Start
    152:   160.650 [TA10] TA10S_Initialize : CreateStageClass
    153:   160.867 [TA10] TA10S_Initialize : End
    154:   160.996 [TA10] TA10_Initialize : End
    155:   161.217 [FM] fmInitialized
    156:   161.309 [FC] _FC_SetDirSuffix (CANON)
    157:   161.387 [FC] _FC_SetConsecutiveMode (mode = 1, DCF = 7231)
    158:   161.498 [FM] fmPrepare
    159:   163.632 [FM] ALV_Initialize (36, 25)
    160:   163.969 [FM] fmAllocDcfNo(0x80e060)(0x0)
    161:   173.161 [TERM] terminateChangeCBR : SHUTDOWN (255)
    162:   173.180 [TERMINATE] SHUTDOWN init comp
    163:   173.279 [TERM] terminateChangeCBR : AUTO_POWEROFF (1)
    164:   173.309 [TERMINATE] Abort init comp
    165:   173.587 [WFT]  PROP_WFT_IMAGE_TRANS (1)
    166:   174.681 [MC] PROP_DISPLAY_OFF_SENSOR : 1
    167:   174.846 [MC] DisplaySensor : 1(0)
    168:   175.365 [MC] PROP_GUI_STATE 0
    169:   175.522 [MC] PROP_LV_ACTION : LV_STOP
    170:   175.635 [MC] PROP_LV_DISPBUSY : not Busy
    171:   175.731 [MC] PROP_LV_LOCK : LVLOCK_PERMIT
    172:   175.828 [MC] PROP_DISABLE_PLAY_IMAGE : Enable Play
    173:   175.934 [MC] JobState 0
    174:   176.563 [MC] QRTime : 2
    175:   176.874 [MC] PROP_VARIANGLE_GUICTRL : Enable
    176:   177.167 [MC] regist master CardCover
    177:   178.263 [TA10] ta10_ChangePropCBR ShotsPlan 2 / TotalSheets 2
    178:   179.106 [MC] GuiGroundState : 0
    179:   179.475 [MC] PROP_LV_ACTION : LV_STOP
    180:   182.398 [SHTC] Mem1Component Size=0x37a54
    181:   183.378 [SHTC] DarkcurAddress:0x5c9a5960, Size:131072
    182:   183.565 [SHTC] scsProperty ID=0x0(0x80)
    183:   183.705 [SHTC] scsProperty ID=0x80040004(0x0)
    184:   186.034 [PRP] MovieParamData
    185:   186.101 [PRP] mode 0 size 0x0 , framerate 0x1e , type 0xf zoom 0x0
    186:   187.026 [JOB] PROP_CFN_TAB2 0 0
    187:   187.480 [WFT]  tomSetRawJpgMode (Type = 0x4)
 

Logged

dmilligan

  • Developer
  • Hero Member
  • *****
  • Posts: 3218
  • 60Da / 1100D / EOSM
Re: [UNBRICKED] Bricked 60D Err 70
« Reply #58 on: October 03, 2014, 06:43:31 PM »
If you can startup the camera in C mode and get to the Canon menu, simply reset all camera settings.
Logged

bpress

  • New to the forum
  • *
  • Posts: 7
Re: [UNBRICKED] Bricked 60D Err 70
« Reply #59 on: October 03, 2014, 10:25:31 PM »
Thanks for replying.  I already tried to reset all settings in C mode.  I get a message from the camera that it has to be in a different mode to reset all.
Logged

dmilligan

  • Developer
  • Hero Member
  • *****
  • Posts: 3218
  • 60Da / 1100D / EOSM
Re: [UNBRICKED] Bricked 60D Err 70
« Reply #60 on: October 03, 2014, 10:37:14 PM »
You need to PM a1ex, he can help you. Disabling assertions is dangerous so that autoexec.bin is not available publicly.
Logged

bpress

  • New to the forum
  • *
  • Posts: 7
Re: [UNBRICKED] Bricked 60D Err 70
« Reply #61 on: October 03, 2014, 10:56:56 PM »
I've tried to PM A1ex, have not heard back.  I understand the risk of using the altered code, but the camera can't be any deader than it is right now. If you have a way of contacting A1ex on my behalf please do.
Logged

Walter Schulz

  • Contributor
  • Hero Member
  • *****
  • Posts: 8602
Re: [UNBRICKED] Bricked 60D Err 70
« Reply #62 on: October 03, 2014, 11:01:11 PM »
A1ex wrote about troubles with his internet connection. I think he will contact you ASAP.
Logged

bpress

  • New to the forum
  • *
  • Posts: 7
Re: [UNBRICKED] Bricked 60D Err 70
« Reply #63 on: October 05, 2014, 03:43:07 PM »
I really don't want to be a pest, but has anybody heard from A1ex? It's been about a week and a half since I first PM'd him.  I really want to see if we can fix this camera.
Logged

Walter Schulz

  • Contributor
  • Hero Member
  • *****
  • Posts: 8602
Re: [UNBRICKED] Bricked 60D Err 70
« Reply #64 on: October 05, 2014, 05:08:39 PM »
Send another PM and/or contact him online via http://webchat.freenode.net/?channels=magiclantern
Logged

a1ex

  • Administrator
  • Hero Member
  • *****
  • Posts: 12564
Re: [UNBRICKED] Bricked 60D Err 70
« Reply #65 on: October 05, 2014, 05:12:03 PM »
Will get back to you once my network connection will be functional again.

On webchat I'm always logged in from a remote server, but I'm usually offline.
Logged

bpress

  • New to the forum
  • *
  • Posts: 7
Re: [UNBRICKED] Bricked 60D Err 70
« Reply #66 on: October 05, 2014, 06:12:45 PM »
Thanks, good luck getting your server fixed.
Logged

tjrobinson

  • New to the forum
  • *
  • Posts: 28
Re: [UNBRICKED] Bricked 60D Err 70
« Reply #67 on: October 06, 2014, 04:21:29 PM »
"the camera can't be any deader than it is right now"

It can, believe me! http://magiclantern.fm/forum/index.php?topic=13383
Logged

tjrobinson

  • New to the forum
  • *
  • Posts: 28
Re: [UNBRICKED] Bricked 60D Err 70
« Reply #68 on: October 11, 2014, 11:50:49 AM »
This thread is marked as [UNBRICKED] - how did you fix it?
Logged

bpress

  • New to the forum
  • *
  • Posts: 7
Re: [UNBRICKED] Bricked 60D Err 70
« Reply #69 on: October 11, 2014, 07:14:10 PM »
I haven't yet.  I'm still waiting for A1ex. Have you been able to get yours to work? How?
Logged

BradRWills

  • New to the forum
  • *
  • Posts: 9
Re: [UNBRICKED] Bricked 60D Err 70
« Reply #70 on: October 15, 2014, 02:01:31 PM »
.
Logged

a1ex

  • Administrator
  • Hero Member
  • *****
  • Posts: 12564
Re: [UNBRICKED] Bricked 60D Err 70
« Reply #71 on: October 17, 2014, 04:04:03 PM »
Alright - connection problems and other stuff sorted (at least for now), so I can diagnose the latest issues.

I've sent PMs to the affected users; if I've missed anyone, just remind me.
Logged

bpress

  • New to the forum
  • *
  • Posts: 7
Re: [UNBRICKED] Bricked 60D Err 70
« Reply #72 on: October 17, 2014, 05:33:12 PM »
A1ex I can't say thank you enough for saving my camera!!
Logged

ShadowPDX

  • New to the forum
  • *
  • Posts: 2
Re: [UNBRICKED] Bricked 60D Err 70
« Reply #73 on: December 30, 2014, 11:47:01 PM »
Logged

jmrobles

  • Just arrived
  • *
  • Posts: 1
Re: [UNBRICKED] Bricked 60D Err 70
« Reply #74 on: March 05, 2015, 06:06:09 AM »
Hi A1ex,

Would like to seek assistance from you about this bothering problem of mine. Have tried with or without ML same err 70 encountered after few seconds of video shooting. Still capture takes a while to have this error but will be there after 10 shots maybe or few more.
Anyway here's the error log i got on my ML:

ASSERT: FALSE
at SoundDevice\SoundDevice_CODEC.c:1048, task ASIF
lv:0 mode:20


Magic Lantern version : v2.3.60D.111
Mercurial changeset   : 7fee07c3b461+ (unified) tip
Built on 2012-07-23 16:06:13 by alex@thinkpad.
Free Memory  : 152K + 1128K
Logged
Pages: 1 2 [3] 4 5
« previous next »