Canon 650D [OLD]

[nanomad]

so  wait if the camera can do a tops of 40mbs then does that mean there isnt a point to spending a small fortune on a 95mbs memory card like SanDisk Extreme Pro and better of getting just the SanDisk Extreme at 45mbs second and using that extra cash to get a larger capacity card instead?

Yes, unless a canon update brings the 208Mhz mode (unlikely, I hope the 700D has it but then, who knows)

[Lucas_W]

Gradual Expo - On -  Ramping Speed 1EV/16 Frame
HDR Video - ISO 200/800v 2EVO

Recorded Video also Flicker

RTFM - http://wiki.magiclantern.fm/userguide#hdr_video

It's suppose to flicker, that's how the HDR Video feature works.

[RafaLibrenz]

I'm running PreAlpha2 here on my T4i. It's working, and I'm happy! Thank you, Nanomad!

Here is the benchmarks of my cards:

[wild05kid05]

For those still struggling to enable boot flag. Here is how I got it working:
Downloaded the fir file (650D-safe-dumper)
Downloaded the 650D Alpha 2 file
Downloaded the program to make the SD card bootable. (EOScard)

Format SD card (Low Level in Camera)
Copy fir file onto SD Card
Update firmware in camera
Remove SD card
Copy ML Alpha2 650D onto SD Card
Put SD Card back in
Install ML Alpha 2 650D (Update firmware in camera)
Remove SD Card
Make the SD bootable (using the program EOScard, Tick first two boxes, Press Save, Refresh)
Put SD Card back in

Done.

[pemstudio]

Where can I find PreAlpha2? I'm interested in testing this.

[Aborgh]

For those still struggling to enable boot flag. Here is how I got it working:
Downloaded the fir file (650D-safe-dumper)
Downloaded the 650D Alpha 2 file
Downloaded the program to make the SD card bootable. (EOScard)

Format SD card (Low Level in Camera)
Copy fir file onto SD Card
Update firmware in camera
Remove SD card
Copy ML Alpha2 650D onto SD Card
Put SD Card back in
Install ML Alpha 2 650D (Update firmware in camera)
Remove SD Card
Make the SD bootable (using the program EOScard, Tick first two boxes, Press Save, Refresh)
Put SD Card back in

Done.

Thanks for this

[pemstudio]

Thanks for this

Aborgh - Do you have files to 650D?  If you have got, could you send me?

[newsense]

Aborgh - Do you have files to 650D?  If you have got, could you send me?

I posted the links in a previous post and found all the links here in this thread.

"-Download the .fir file from https://bitbucket.org/hudson/magic-lantern/src/99bd629f7c5712346369840e64c04fd2d4576520/platform/650D.101/devkit/650D-safe-dumper.fir?at=unified (Thanks to Lucas_W for pointing out the link, I would have uploaded the .fir myself but thought who would use firmware from some stranger)

Enable the bootflag on the SD card:
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-Do a low-level format of the SD card (DO NOT SKIP THIS)
 - Enable SD card bootflag using EOSCard or similar ( software to make the card bootable: http://wiki.magiclantern.fm/3rd_party_software )
 
Install Magic Lantern
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-- Copy over the files to the SD card ( Download ML Alpha 2 for the 650D here: http://nanomad.magiclantern.fm/650D/magiclantern-v2.3.NEXT.2013Apr30.650D.PreAlpha2.zip and unzip to the root of your SD card. You should than have a ML folder and an autoexec.bin on the root of your SD card. "

[loplo]

Is it really that hard to search?

[newsense]

Is it really that hard to search?

He contributed so maybe he felt he shouldn't have to read?

[loplo]

In this case, "mea culpa".

[Vietky69]

I posted the links in a previous post and found all the links here in this thread.

"-Download the .fir file from https://bitbucket.org/hudson/magic-lantern/src/99bd629f7c5712346369840e64c04fd2d4576520/platform/650D.101/devkit/650D-safe-dumper.fir?at=unified (Thanks to Lucas_W for pointing out the link, I would have uploaded the .fir myself but thought who would use firmware from some stranger)

Enable the bootflag on the SD card:
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-Do a low-level format of the SD card (DO NOT SKIP THIS)
 - Enable SD card bootflag using EOSCard or similar ( software to make the card bootable: http://wiki.magiclantern.fm/3rd_party_software )
 
Install Magic Lantern
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-- Copy over the files to the SD card ( Download ML Alpha 2 for the 650D here: http://nanomad.magiclantern.fm/650D/magiclantern-v2.3.NEXT.2013Apr30.650D.PreAlpha2.zip and unzip to the root of your SD card. You should than have a ML folder and an autoexec.bin on the root of your SD card. "

Thanks for this .

[pemstudio]

I posted the links in a previous post and found all the links here in this thread.

"-Download the .fir file from https://bitbucket.org/hudson/magic-lantern/src/99bd629f7c5712346369840e64c04fd2d4576520/platform/650D.101/devkit/650D-safe-dumper.fir?at=unified (Thanks to Lucas_W for pointing out the link, I would have uploaded the .fir myself but thought who would use firmware from some stranger)

Enable the bootflag on the SD card:
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-Do a low-level format of the SD card (DO NOT SKIP THIS)
 - Enable SD card bootflag using EOSCard or similar ( software to make the card bootable: http://wiki.magiclantern.fm/3rd_party_software )
 
Install Magic Lantern
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-- Copy over the files to the SD card ( Download ML Alpha 2 for the 650D here: http://nanomad.magiclantern.fm/650D/magiclantern-v2.3.NEXT.2013Apr30.650D.PreAlpha2.zip and unzip to the root of your SD card. You should than have a ML folder and an autoexec.bin on the root of your SD card. "

Thank yo very much for your help.

[Aborgh]

I posted the links in a previous post and found all the links here in this thread.

"-Download the .fir file from https://bitbucket.org/hudson/magic-lantern/src/99bd629f7c5712346369840e64c04fd2d4576520/platform/650D.101/devkit/650D-safe-dumper.fir?at=unified (Thanks to Lucas_W for pointing out the link, I would have uploaded the .fir myself but thought who would use firmware from some stranger)

Enable the bootflag on the SD card:
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-Do a low-level format of the SD card (DO NOT SKIP THIS)
 - Enable SD card bootflag using EOSCard or similar ( software to make the card bootable: http://wiki.magiclantern.fm/3rd_party_software )
 
Install Magic Lantern
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-- Copy over the files to the SD card ( Download ML Alpha 2 for the 650D here: http://nanomad.magiclantern.fm/650D/magiclantern-v2.3.NEXT.2013Apr30.650D.PreAlpha2.zip and unzip to the root of your SD card. You should than have a ML folder and an autoexec.bin on the root of your SD card. "

On mac, do you use macboot and choose "make dslr bootable" with log?

[OliverD]

On mac, do you use macboot and choose "make dslr bootable" with log?

I choose "canon scriptable" or what its called and it worked for me

[diy-greenenergy]

For those still struggling to enable boot flag. Here is how I got it working:
Downloaded the fir file (650D-safe-dumper)
Downloaded the 650D Alpha 2 file
Downloaded the program to make the SD card bootable. (EOScard)

Format SD card (Low Level in Camera)
Copy fir file onto SD Card
Update firmware in camera
Remove SD card
Copy ML Alpha2 650D onto SD Card
Put SD Card back in
Install ML Alpha 2 650D (Update firmware in camera)
Remove SD Card
Make the SD bootable (using the program EOScard, Tick first two boxes, Press Save, Refresh)
Put SD Card back in

Done.

Thanks for this!
I had to charge the battery, then start the installation....

[Aborgh]

Almost F'ed up my camera when trying to install... Will leave this for now...

[JamieRollsMedia650D]

Almost F'ed up my camera when trying to install... Will leave this for now...

This was so easy to install with above instructions and links took me 5mins.

Also this ML stuff is amazing. Can not wait for final release with everything working 100%.

IF I find anything to report that hasn't already I will put up straight away.

After
5montha of me following this I have finally got ml so yea big day for me!

[Aborgh]

This was so easy to install with above instructions and links took me 5mins.

Also this ML stuff is amazing. Can not wait for final release with everything working 100%.

IF I find anything to report that hasn't already I will put up straight away.

After
5montha of me following this I have finally got ml so yea big day for me!

Mine showed up with small boxes and said "ML did not find no fonts" or something like that and some white texts in the upper left corner kept on flashing... :S

[kzi2006]

Almost F'ed up my camera when trying to install... Will leave this for now...

i have Installed this alfa on all my 3 650D cameras - all working good)

[Aborgh]

i have Installed this alfa on all my 3 650D cameras - all working good)

Could you please tell me your steps and how the camera behaved while you upgraded it?

[nanomad]

As a developer, it would be best if you explained what you did and what went wrong

[donjames150]

rather than have to figure out where all these files are at..........

Create a magic lantern folder on your hard drive

Download http://nanomad.magiclantern.fm/650D/magiclantern-v2.3.NEXT.2013Apr30.650D.PreAlpha2.zip (unzip all files to your ml folder)

On your camera select menu, first wrench icon, format card

download https://bitbucket.org/hudson/magic-lantern/src/99bd629f7c5712346369840e64c04fd2d4576520/platform/650D.101/devkit/650D-safe-dumper.fir?at=unified, then copy the .fir file to your card and put it back in the camera.

With the cam in manual mode, go to last wrench setting before star, fimware ver, set,  select ok, then my menu settings will read enablebootdisk

Put your card in the computer and download http://pel.hu/down/EOScard.exe and run this program

Check EOS Devlop and Bootdisk boxes, save

Check the card, if EOS card wrote any files, delete them

Copy from your ML folder these files: ML folder, autoexec.bin and 650D-safe-dumper.fir to your card

Put card in camera and press the trashcan button after it boots, then the left arrow button to the left of the set button

[Aborgh]

As a developer, it would be best if you explained what you did and what went wrong

I low formated the card , Downloaded the 650D-safe-dumper.fir put it on the SDHC card, tried to update and thats when the "ML something something" white text in the upper left corner appeared saying something about some font and then a smal QR code look-a-like box appeared in the middle of the screen. Thats when I panicked and shut the camera off, removed the battery and removed the files that were on the SDHC.

Or is it suppose to do this?

[nanomad]

You need the FIR and ML files on the card too.

But:
-  Remove any third party accessories / batteries first
-  Don't use a battery grip
- Clear canon settings and Cfn
- Run fw upgrade from PHOTO M mode (not video, photo)