Author Topic: EOS M Alpha 1 [FIXED][DOWNLOAD] (Read 680377 times)

aaallleeexxx · « **Reply #150 on:** March 06, 2013, 01:58:05 AM »

Quote from: coutts on February 06, 2013, 08:55:44 PM

This means anamorphic, and ... we still can't sync them properly so it's not really worth figuring out right now.
Unfortunate.. I had higher hopes for this camera.

so there's really no way to do a x2 anamorphic unsqueeze?
i so hoped for this in camera:(

Caaher · « **Reply #151 on:** March 10, 2013, 07:27:54 PM »

Hi
Can You give us any clue when can we expect stable version?

Thx for great job!

1% · « **Reply #152 on:** March 10, 2013, 09:09:50 PM »

Guessing all of these builds will stable out in 6 months when all (obvious) bugs are resolved. Right now it hasn't even been out that long, lol.

coutts · « **Reply #153 on:** March 11, 2013, 11:44:20 PM »

I'm busy with class at the moment (have to do school before ML), but I try to work on it when I get free time.

lately I'm trying to figure out a guimode number to use for the ML menu, to keep the canon EV bar from blinking on top of the ML menu.

1% · « **Reply #154 on:** March 11, 2013, 11:54:01 PM »

Try values from 6D/5d3/650D yet?

brunoastroHHDE · « **Reply #155 on:** March 28, 2013, 08:48:34 PM »

Hi,

I´m a newbe here and very interested in the M for astronomic use. Is it possible, to unlock the software to use Utility for sequence long time exposures of a duration of 10 x 10 min. for exsample like the DSLR models?

Maybe, you handle that in an older post.

Thank you for help, Bruno

mdwhaley · « **Reply #156 on:** April 02, 2013, 02:03:22 AM »

Hello,

Thanks for all your hard work.

Would it be possible to move the focus point by touching the screen when the lens is in MF mode through Magic Lantern?

Currently I use the M with AF set to *, AF + MF, and FlexiZone single. With Magic Zoom set to AF point at 2:1 this works awesome on USM and the 22 STM kit lens since they are all full time manual focus. A very spontaneous camera setup this way. Unfortunately lenses that aren't full time manual focus like my 50 1.8 and 35 f2 this doesn't work since the lens communicates to the camera it is MF the points are no longer moveable.

Mike

Regs · « **Reply #157 on:** April 03, 2013, 10:00:34 PM »

Just loaded ML on my EOS M. It seems to have loaded ok and can see the overlay.
I tried the trash button to bring up the ML menu but no luck
I know this seems simple. how do I open the ML menu? can't find it anywhere

mdwhaley · « **Reply #158 on:** April 04, 2013, 01:58:38 AM »

Quote from: Regs on April 03, 2013, 10:00:34 PM

Just loaded ML on my EOS M. It seems to have loaded ok and can see the overlay.
I tried the trash button to bring up the ML menu but no luck
I know this seems simple. how do I open the ML menu? can't find it anywhere

Set custom function 6 to 2: ISO Speed then when the ISO menu pops up touch the escape icon

coutts · « **Reply #159 on:** April 04, 2013, 03:16:03 PM »

Quote from: Regs on April 03, 2013, 10:00:34 PM

Just loaded ML on my EOS M. It seems to have loaded ok and can see the overlay.
I tried the trash button to bring up the ML menu but no luck
I know this seems simple. how do I open the ML menu? can't find it anywhere

tap 2 fingers on the screen at the same time

1 finger tap is same as Q, to open submenus.

nanomad · « **Reply #160 on:** April 07, 2013, 08:04:47 PM »

Coutts, I've pushed a fix for movie restart. Can you check it too?

pspilot · « **Reply #161 on:** April 11, 2013, 05:47:52 AM »

Hi,

is there a procedure to disable ML on startup? Holding the SET button doesn't work as with some other cameras.

Masheen · « **Reply #162 on:** April 15, 2013, 02:02:09 PM »

Is there a way to auto-focus every few images, instead of every image using the intervalometer? I either need that ability or the ability to send commands over PTP. Otherwise I'll have to purchase another camera.

I'd appreciate any information you guys can offer.

a1ex · « **Reply #163 on:** April 15, 2013, 02:24:53 PM »

You can try with PicoC scripting; no idea how well it works on the M. You'll have to compile ML yourself.

Eirik5D3 · « **Reply #164 on:** April 15, 2013, 02:43:34 PM »

Hello, how do you uninstall the magic lantern? tried formating the card but still there.. cant find any firmware download from canon?

Thanks for any help

nanomad · « **Reply #165 on:** April 15, 2013, 03:18:46 PM »

Re-run the .fir and switch the top dial when asked. Then do a low level format of the card

jerrykil · « **Reply #166 on:** December 11, 2013, 01:57:13 PM »

FYI: TL discussion got moved here: http://www.magiclantern.fm/forum/index.php?topic=9508.new#new

gary2013 · « **Reply #167 on:** December 12, 2013, 01:09:43 AM »

delete

gurayvarol · « **Reply #168 on:** December 19, 2013, 04:04:47 AM »

Hi guys,
Thanx for all your hard efforts. I think my problem seems to be unique so I decided to have it written here. I have EOS M with 1.06 firmware and ML installed on a 64GB card. I am trying to get a constant timelapse but the camera becomes unresponsive after 2 or 3 days. The camera mentioned a shoot malloc when I was trying to format the card (keeping the ML)

Is it the same problem with the shutterbug that is being discussed in various topics or is it something new?
would installing 2.02 fix that?
Would changing the card to 32GB fix that?

I am running a test with the same features but on a 32GB card I would let you know the results in a few days but if there is anyone who has already tried it can save my time and would be appreciated

krisc · « **Reply #169 on:** January 16, 2014, 11:07:07 AM »

You seems to have ML running on EOS M. Where from I can download it ? please

John · « **Reply #170 on:** January 17, 2014, 09:17:56 PM »

http://builds.magiclantern.fm/#/

glmccready · « **Reply #171 on:** January 22, 2014, 02:10:19 AM »

John: Thanks for the list but I didn't see the EOS M on the list? I havn't gotten the camera yet, but they are now pretty inexpensive, just trying to make sure I can use ML, like I do on my 550, for time lapse.
Thanks,
Gary

News:

Author Topic: EOS M ** Alpha 1 ** [FIXED][DOWNLOAD] (Read 680377 times)

Author Topic: EOS M Alpha 1 [FIXED][DOWNLOAD] (Read 680377 times)