Author Topic: Nightly Builds - try the very latest stuff here  (Read 1138476 times)

tron

  • Member
  • ***
  • Posts: 162
Re: Nightly Builds - try the very latest stuff here -NOT FOR RAW
« Reply #200 on: August 29, 2013, 02:22:53 PM »
Why ? It worked perfectly. I will miss it. In fact I had used it one day and the next I had loaded the latest ML and I realized afterwards that my supposedly -5 shots were taken at -2!  (At -2 moon was burned beyond recovery in contrast to -5 previous day where an additional -2 at Camera raw restored it fully).

Do you fear a possible  problem and you stop it at Av?

a1ex

  • Administrator
  • Hero Member
  • *****
  • Posts: 12564
Re: Nightly Builds - try the very latest stuff here -NOT FOR RAW
« Reply #201 on: August 29, 2013, 02:31:11 PM »
Because I don't want to break Canon limits without good reason.

tron

  • Member
  • ***
  • Posts: 162
Re: Nightly Builds - try the very latest stuff here -NOT FOR RAW
« Reply #202 on: August 29, 2013, 02:54:43 PM »
At least can the 5EV limit for manual mode be raised to say 7 or 9?

But this is more like a new feature request rather than a fix request and I understand if it will be denied for other more important things which we all know what these are  :)  :)  :)

tron

  • Member
  • ***
  • Posts: 162
Re: Nightly Builds - try the very latest stuff here -NOT FOR RAW
« Reply #203 on: August 29, 2013, 02:56:01 PM »
The reason is for a second frame to be taken immediately at this large EV difference

grogan197

  • New to the forum
  • *
  • Posts: 2
Re: Nightly Builds - try the very latest stuff here -NOT FOR RAW
« Reply #204 on: August 31, 2013, 12:55:47 AM »
Just switched to nightly from 2.3 but can't spot the bulb ramping options. Have they been moved / removed? Cheers

nanomad

  • Administrator
  • Hero Member
  • *****
  • Posts: 2918
  • All your websites are belong to us
Re: Nightly Builds - try the very latest stuff here
« Reply #205 on: August 31, 2013, 07:18:20 PM »
Yes, use ETTR + Post deflicker scripts.


BTW, the new nightly builds site is up & running: http://builds.magiclantern.fm
Make sure you download the correct version for your camera.
EOS 1100D | EOS 650 (No, I didn't forget the D) | Ye Olde Canon EF Lenses ('87): 50 f/1.8 - 28 f/2.8 - 70-210 f/4 | EF-S 18-55 f/3.5-5.6 | Metz 36 AF-5

Stedda

  • Hero Member
  • *****
  • Posts: 504
Re: Nightly Builds - try the very latest stuff here
« Reply #206 on: August 31, 2013, 07:40:30 PM »
This is EPIC!

Thanks to all!
5D Mark III -- 7D   SOLD -- EOS M 22mm 18-55mm STM -- Fuji X-T1 18-55 F2.8-F4 & 35 F1.4
Canon Glass   100L F2.8 IS -- 70-200L F4 -- 135L F2 -- 85 F1.8 -- 17-40L --  40 F2.8 -- 35 F2 IS  Sigma Glass  120-300 F2.8 OS -- 50 F1.4 -- 85 F1.4  Tamron Glass   24-70 2.8 VC   600EX-RT X3

chilimac02

  • New to the forum
  • *
  • Posts: 42
Re: Nightly Builds - try the very latest stuff here
« Reply #207 on: August 31, 2013, 10:38:57 PM »
Still no sl1/100d even though it was posted on Facebook
Rebel SL1/100D... 40mm f/2.8 STM, 18-55mm f/3.5 IS STM, Tamron 70-300mm Di VC USD, Sigma 30mm f/1.4 Art

swinxx

  • Hero Member
  • *****
  • Posts: 606
Re: Nightly Builds - try the very latest stuff here
« Reply #208 on: August 31, 2013, 10:49:49 PM »
awesome! thx

parrotboy

  • Just arrived
  • *
  • Posts: 1
Re: Nightly Builds - try the very latest stuff here
« Reply #209 on: August 31, 2013, 11:49:58 PM »
Just want to make sure, im using a 600d running one of the newest ML nightlies, if I order the Sescom 550D HOCF cable it'll allow me to monitor audio, correct? Just making sure this feature works on the 600D

nanomad

  • Administrator
  • Hero Member
  • *****
  • Posts: 2918
  • All your websites are belong to us
Re: Nightly Builds - try the very latest stuff here -NOT FOR RAW
« Reply #210 on: September 02, 2013, 05:50:45 PM »
At least can the 5EV limit for manual mode be raised to say 7 or 9?

But this is more like a new feature request rather than a fix request and I understand if it will be denied for other more important things which we all know what these are  :)  :)  :)

Yes, this feature is waiting to be merged. It will be available starting from towrrow's nightly builds
EOS 1100D | EOS 650 (No, I didn't forget the D) | Ye Olde Canon EF Lenses ('87): 50 f/1.8 - 28 f/2.8 - 70-210 f/4 | EF-S 18-55 f/3.5-5.6 | Metz 36 AF-5

Jason Montalvo

  • Freshman
  • **
  • Posts: 54
  • 5D3/5D2 & Some BlackMagic
Re: Nightly Builds - try the very latest stuff here
« Reply #211 on: September 02, 2013, 08:38:23 PM »
anyone else having issues with the 5DMK3 build? Every time I try to load the modules it says that their already loaded and doesn't allow them to load.

nanomad

  • Administrator
  • Hero Member
  • *****
  • Posts: 2918
  • All your websites are belong to us
Re: Nightly Builds - try the very latest stuff here
« Reply #212 on: September 02, 2013, 09:10:53 PM »
Well maybe they are loaded? Latest builds have autoload on boot enabled by default
EOS 1100D | EOS 650 (No, I didn't forget the D) | Ye Olde Canon EF Lenses ('87): 50 f/1.8 - 28 f/2.8 - 70-210 f/4 | EF-S 18-55 f/3.5-5.6 | Metz 36 AF-5

RenatoPhoto

  • Moderators
  • Hero Member
  • *****
  • Posts: 1509
  • 5DM3 / 7D
Re: Nightly Builds - try the very latest stuff here
« Reply #213 on: September 02, 2013, 10:05:38 PM »
anyone else having issues with the 5DMK3 build? Every time I try to load the modules it says that their already loaded and doesn't allow them to load.

1st Note that the menu has changed, now the modules are by default not enabled. 
2nd Enable the modules that you want to use
3rd Turn camera off and on.

The modules will be loaded

The Load modules now does not work correctly, will have to be fixed.  The default setting is Autoload modules on startup so use it for now!
http://www.pululahuahostal.com  |  EF 300 f/4, EF 100-400 L, EF 180 L, EF-S 10-22, Samyang 14mm, Sigma 28mm EX DG, Sigma 8mm 1:3.5 EX DG, EF 50mm 1:1.8 II, EF 1.4X II, Kenko C-AF 2X

a1ex

  • Administrator
  • Hero Member
  • *****
  • Posts: 12564
Re: Nightly Builds - try the very latest stuff here
« Reply #214 on: September 02, 2013, 10:10:31 PM »
The Load modules now does not work correctly, will have to be fixed.

Which part does not work?

Stedda

  • Hero Member
  • *****
  • Posts: 504
Re: Nightly Builds - try the very latest stuff here
« Reply #215 on: September 02, 2013, 10:30:09 PM »
Im getting Old API on File Manager and Picture Viewer.... everything else works fine for me with Autoload after changing them all to On.

This is with this AMs nightly.
5D Mark III -- 7D   SOLD -- EOS M 22mm 18-55mm STM -- Fuji X-T1 18-55 F2.8-F4 & 35 F1.4
Canon Glass   100L F2.8 IS -- 70-200L F4 -- 135L F2 -- 85 F1.8 -- 17-40L --  40 F2.8 -- 35 F2 IS  Sigma Glass  120-300 F2.8 OS -- 50 F1.4 -- 85 F1.4  Tamron Glass   24-70 2.8 VC   600EX-RT X3

RenatoPhoto

  • Moderators
  • Hero Member
  • *****
  • Posts: 1509
  • 5DM3 / 7D
Re: Nightly Builds - try the very latest stuff here
« Reply #216 on: September 02, 2013, 10:45:49 PM »
Which part does not work?

On the first boot enable the modules that you want loaded..
Press Load modules now..
Get message on bottom left screen:

Init moudules..
modules loaded
Modules already loaded.
http://www.pululahuahostal.com  |  EF 300 f/4, EF 100-400 L, EF 180 L, EF-S 10-22, Samyang 14mm, Sigma 28mm EX DG, Sigma 8mm 1:3.5 EX DG, EF 50mm 1:1.8 II, EF 1.4X II, Kenko C-AF 2X

tron

  • Member
  • ***
  • Posts: 162
Re: Nightly Builds - try the very latest stuff here
« Reply #217 on: September 03, 2013, 02:59:30 AM »
ML2.3 Unified updated with ML night build unified 3 Sep on 5D2:

arcanoid, file_man, pic_view: oldAPI

Since Dual ISO wasn't available I tried:

ML2.3 Unified updated with af839274b1fa.zip (DUAL ISO for 5D2) to get dual_iso and then updated  with ML night build for 5D2 (3 Sep).

Same result:  arcanoid, file_man, pic_view: oldAPI

a1ex

  • Administrator
  • Hero Member
  • *****
  • Posts: 12564
Re: Nightly Builds - try the very latest stuff here
« Reply #218 on: September 03, 2013, 07:43:55 AM »
They have to be recompiled.

tob

  • New to the forum
  • *
  • Posts: 21
Re: Nightly Builds - try the very latest stuff here
« Reply #219 on: September 03, 2013, 10:55:46 AM »
Two builds failed:

EOSM.116
This Build Failed!

1100D.105
This Build Failed!

tron

  • Member
  • ***
  • Posts: 162
Re: Nightly Builds - try the very latest stuff here
« Reply #220 on: September 03, 2013, 01:19:06 PM »
Can the dual_iso module be included in the night builds?

Jason Montalvo

  • Freshman
  • **
  • Posts: 54
  • 5D3/5D2 & Some BlackMagic
Re: Nightly Builds - try the very latest stuff here
« Reply #221 on: September 04, 2013, 01:55:16 AM »
1st Note that the menu has changed, now the modules are by default not enabled. 
2nd Enable the modules that you want to use
3rd Turn camera off and on.

The modules will be loaded

The Load modules now does not work correctly, will have to be fixed.  The default setting is Autoload modules on startup so use it for now!

My Gratitude to you ! Thanks Renato

vstrglv

  • Senior
  • ****
  • Posts: 250
Re: Nightly Builds - try the very latest stuff here
« Reply #222 on: September 04, 2013, 08:55:43 AM »
Can the dual_iso module be included in the night builds?
I am interested too.
Canon 5D3,1.1.3; Canon EOS M,202,  CF-SanDisk Extreme PRO,160MB/s, 256GB, SD-SanDisk Extreme Pro, 170MB/s, 128GB.

blindcat

  • New to the forum
  • *
  • Posts: 6
Re: Nightly Builds - try the very latest stuff here
« Reply #223 on: September 04, 2013, 10:48:29 AM »
I would like to access the nightly build from June 11 2013. Any way to get it anymore?
If not, I dislike the new page :-(   Else ... I like it :-)

a1ex

  • Administrator
  • Hero Member
  • *****
  • Posts: 12564
Re: Nightly Builds - try the very latest stuff here
« Reply #224 on: September 04, 2013, 10:49:53 AM »
What's so special about it? My calendar shows September...