Nightly Builds - try the very latest stuff here

Started by a1ex, October 11, 2012, 01:55:31 PM

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

DeafEyeJedi

I noticed that as well regarding RAWMagic throwing down the HAMMER and somehow halting the nightlies for 5D3 1.2.3!

Is this really a big deal? NO... IMO only because I believe I can get more out of the latest nightly 1.1.3 (longer recording times for RAW/MLV as well as FRSP, etc...) whereas 1.2.3 is just simply out of date but can still be used since it still works well for the most part depending on your shooting situations.

I sometimes upgrade to 1.2.3 if need to use HDMI output for certain shoots in order for 'Producers' to see the actual shot on external monitors in real time. (This is not avail in 1.1.3 due to Canon's restrictions)

But for the most part I stick with 1.1.3 to get the most out of my 5D3 in terms of RAW/MLV, FRSP, Dual-ISO and so on...

As I previously stated "I'm a happy swinger between 1.1.3 & 1.2.3" as long as you know what you're doing during the upgrade/downgrade process!
5D3.113 | 5D3.123 | EOSM.203 | 7D.203 | 70D.112 | 100D.101 | EOSM2.* | 50D.109

dmilligan

The only differences of any consequence between the main branch and the 5d3 123 branch are some recent changes to the io_crypt module and about a dozen lines of very minor changes. In other words there is practically no difference between the 123 branch and the nightly builds. Most commits to the repo over the past 6 months have been to "desktop" tools (mlv_dump, raw2dng, cr2hdr, etc) which reside in the same repo. A change to one of these tools triggers a new nightly build, even though no code that is actually part of ML for the cameras has changed.

So the fact that there are recent nightly builds, but the last 5D3 123 build is from August is a bit misleading. There really hasn't been any development progress of any real consequence in the last 6 months.

From all indications, the lack of development progress has been due to personal reasons with devs and not anything really to do with RAWMagic.

DeafEyeJedi

Thanks @dmilligan for the clarification on that part regarding RAWMagic not having anything to do with the hiatus of 1.2.3 -- Makes more sense now!
5D3.113 | 5D3.123 | EOSM.203 | 7D.203 | 70D.112 | 100D.101 | EOSM2.* | 50D.109

cale.rodriguez

Hey guys, I've posted this in the "de-bug" section and no reply.

Running Jan 2015 nightly build on a 1.1.3 5D MARK III and I'm getting no audio.

"Audio failed to stop, state 4 error"

walter_schulz

Sorry but a proper bug report doesn't look like this.
There are 6 builds with date "Jan 2015" ...
You haven't mentioned the video mode you were usings: Native Canon (H.264) or MLV/RAW?
You haven't mentioned the modules you loaded.
Steps to reproduce? Steps you tried to avoid this problem?
At which state does this error occur: Beginning or ending of record? Else?

Magic Ball mode: Most likely you are trying to run RAW_REC.mo which doesn't support audio at all. You have to run MLV_REC.mo together with MLV_SND.mo

cale.rodriguez

Sweet, that was the issue, thanks.

Is there a difference MLV and RAW in terms of quality?

Frank7D

"Is there a difference MLV and RAW in terms of quality?"

No.

jeffR

The link to the nightly builds is not working.  Is there a way I can get the latest build.....

martyrstar


Walter Schulz


jeffR

https did not work.  I am able to select my camera model, but the link to the zip won't open.

Walter Schulz


jeffR

http does not work either.  I tried on a few computers.

pikepike

i'm having the same problem the link wont work

DeafEyeJedi

C'mon...Really?

https://vimeo.com/119783961

Worked on both http & https in case you were curious.
5D3.113 | 5D3.123 | EOSM.203 | 7D.203 | 70D.112 | 100D.101 | EOSM2.* | 50D.109

jeffR


a1ex

If the link is not working for you, can you provide a video showing what you do? (just like the one uploaded by DeafEyeJedi).

One little request: upload it to youtube (for some reason I couldn't watch anything on vimeo lately)

walter_schulz

Quote from: a1ex on February 17, 2015, 09:01:27 AM
(for some reason I couldn't watch anything on vimeo lately)
Sounds related to Adobe Flash-Player. Make sure to use latest (16.0.0.305) and you (or some security tool) aren't blocking it.

darkvirus666

I am having a lot of problems.

I bought a 5d3 camera unable to upload firm. Finally could install ML  nightly fron february this year (using  5D3-113-bootflag.fir) . But Im still unable to upload to firm123 (is there any way to get a 5D3-123-bootflag.fir or something similar?) .

I show this threath says done... but dont know where the solution is.

http://www.magiclantern.fm/forum/index.php?topic=9827.0

The camera says:

"Update file error. Please check the memory card and reload the battery and try again"

Thank you for helping


Walter Schulz

Sorry, but I'm unable to understand what is actually going on. http://www.magiclantern.fm/forum/index.php?topic=9827.0 is *not* about installing ML!

Please clarify:
Which Canon firmware version is installed?
Which Canon firmware do you want to be installed?


darkvirus666

Thank you for answering.


I´ve got the 1.1.3 canon firm with ML nightly built. (there are some isues when installing, but it seems to work perfect)
and I want to update to canons 1.2.3. firm.

If I directly put the canon .fir archive in the card it sends the error "unable Update file error. Please check the memory card and reload the battery and try again"

I want to install firm 1.2.3.and then magic lantern in the 1.2.3.

If Im not posting in the right place please excuse me.


walter_schulz

Format card inside cardreader.
Copy Canon's firmware file 5D300123.FIR to card.
Insert card into cam und run firmware upgrade.
Insert card into cardreader, delete 5D300123.FIR and copy extracted nightly build contents to card.
Insert card into cam and run firmware update.

darkvirus666

What I do:

Format card inside cardreader.
Copy Canon's firmware file 5D300123.FIR to card.
Insert card into cam und run firmware upgrade.

Camera says.... unable Update file error. Please....
----------------

Also tryed:

Format card inside cardreader.
Format card inside cam.
Copy Canon's firmware file 5D300123.FIR to card.
Insert card into cam und run firmware upgrade.

Camera says.... unable Update file error. Please....

And starting become crazy.

walter_schulz

Download zip once again http://pel.hu/eoscard
Extract files and copy FIR to card. Run firmware update.

If this doesn't work: Connect cam to PC/Mac via USB and use EOS Utility to install Canon's firmware.
http://addedoptimization.com/5d-mark-iii-firmware-update-using-canon-eos-utility/

darkvirus666