Nightly Builds - try the very latest stuff here

Started by a1ex, October 11, 2012, 01:55:31 PM

Previous topic - Next topic

0 Members and 4 Guests are viewing this topic.

jippalippa

Is it normal that all the latest 5D MKII Nightly Builds can't be download because it says "This Build Has Failed".
This happened for something like the latest 10 builds.
Thanks.

Walter Schulz



josepvm

Hi, I'm new to this forum, but I'm very happy as a Magic Lantern user, and I would like to help having nightly builds for 500D working again.

I'm very outdated as a developer.  Last time I wrote a C program was 23 years ago, using Borland Turbo C 2.0. And in assembler, things are even worse, last time was using a ZX Spectrum, storing my code in a cassette tape  ::)

But I've read Alex's tutorial for finding stubs, and I have disassembled my 500D firmware using "disassemble.pl"

I've found that FIO_SeekSkipFile is located at FF1967D4

That follows the 0xD0 offset rule from FIO_SeekFile (FF1968A4 for 500D) as observed in other cameras. And the stub has the structure described in the first example of the tutorial: starts with a "push" instruction, the stub is the destination for several calls from other sections in the firmware. with "bl" instructions, including a call from FIO_SeekFile.

I've also found a similar structure starting with "push" at FF3A96EC, that could be the "CancelTimer" stub.

It's called from 4 places, and the routine includes the string "DlgPlayMovieControlGuide.c CancelTimer" after an "add" instruction.

This is the first time I do this. So please, if a more experienced ML contributor could look at this adresses, would be great.

And many thanks to all the developers for your great work.
-----------------------------------------------------------------------------------------
  Edit:  I've posted this info as a comment in the related bitbucket commits page https://bitbucket.org/hudson/magic-lantern/commits/03bb4ef73a77a5bf4b4dbb05c8b473f789439bb2?at=gui-timers , I supose that is a better place.

brechstange

Hi
this is the second day that the nightly built of the 550d is not working. The camera starts up , and then keeps blinking red.

ok.. just did try out downloading the latest file over the "download" button .. and that did work ...
thanks !

Cheers
Brechi

frenchi38

Quote from: brechstange on June 20, 2014, 03:05:26 PM
Hi
this is the second day that the nightly built of the 550d is not working. The camera starts up , and then keeps blinking red.

Cheers
Brechi

Have same problem on 550D: last build which is working is "Nightly.2014Jun11.550D109". All later builds results in blocked camera with red LED keeps blinking .

BTW: Thanks a lot for your great work.


CU

frenchi38

waltztj

This build is for 5d3 the battery info is not working now. I have a grip and now it tells me I have one battery installed I have tried 4 different batteries and I get the same thing. The build before this one it was working.

Audionut

Quote from: waltztj on June 22, 2014, 10:56:57 AM
The build before this one it was working.

Which build specifically?  I noticed this issue also, but haven't done anything to track it down.

waltztj

2014-06-20 06:57:56 -0400

This is the build that was working

Audionut

Firmware 113 or 123? 

I've been on 123 for a while,  I've tried a couple of different builds and it has always been broken.  I just assumed it was something specific to the Canon firmware. 

a1ex

The last relevant change regarding battery level was 2 years ago (a96369c).

chris_overseas

AFAIK there's never been support for the grip (two batteries). ML just shows info about one battery (the left one?), the other is ignored.
EOS R5 1.1.0 | Canon 16-35mm f4.0L | Tamron SP 24-70mm f/2.8 Di VC USD G2 | Canon 70-200mm f2.8L IS II | Canon 100-400mm f4.5-5.6L II | Canon 800mm f5.6L | Canon 100mm f2.8L macro | Sigma 14mm f/1.8 DG HSM Art | Yongnuo YN600EX-RT II

Audionut

For me, it's the feedback in the Canon menu.  I don't know exactly when the issue first appeared, as I stopped using the grip 24/7, just before the changeover to 123. 

To clarify, I'm using a third party grip, so assumed it was something in the Canon battery changes (post 113) that was the issue.

My interest is sparked, because waltztj reports that it is working in a specific build.

ansius

No, ML reads only one of the batteries, depending on grip tough witch one if any. Some third party grips seam to identify them as AA battery arrays, thus inhibiting mirror lockup for cleaning.
Canon EOS 7D & 40D, EF-S 17-85mm IS USM, EF 28-300mm IS USM, Mir-20, Mir-1, Helios 44-5, Zenitar ME1, Industar 50-2, Industar 61L/Z-MC, Jupiter 37A, TAIR-3
http://www.ansius.lv http://ansius.500px.com

a1ex

Quote from: frenchi38 on June 21, 2014, 05:29:39 PM
Have same problem on 550D: last build which is working is "Nightly.2014Jun11.550D109". All later builds results in blocked camera with red LED keeps blinking .

Solved.


leongrim

hi everybody. I have canon 6D . i don't know to programming :(
i will have to test latest version of ML for canon 6d if anyone will compilation it for me ;)
10x

johming

hi guys!
i saw that there is a new build for 5D3 - 123 exit 21 of june, i've installed ML about one month ago, and everything go great.
In the new build what is changed exactly?

Stedda

Quote from: johming on June 24, 2014, 12:28:25 PM
hi guys!
i saw that there is a new build for 5D3 - 123 exit 21 of june, i've installed ML about one month ago, and everything go great.
In the new build what is changed exactly?

The changelog explains everything in detail for every build....
5D Mark III -- 7D   SOLD -- EOS M 22mm 18-55mm STM -- Fuji X-T1 18-55 F2.8-F4 & 35 F1.4
Canon Glass   100L F2.8 IS -- 70-200L F4 -- 135L F2 -- 85 F1.8 -- 17-40L --  40 F2.8 -- 35 F2 IS  Sigma Glass  120-300 F2.8 OS -- 50 F1.4 -- 85 F1.4  Tamron Glass   24-70 2.8 VC   600EX-RT X3

Stedda

On the nightly build page. Select your platform you should see buttons below. Click each changset to read up on what was done and the affected code.
http://builds.magiclantern.fm/#/


Or just go straight to BitBucket...
5D Mark III -- 7D   SOLD -- EOS M 22mm 18-55mm STM -- Fuji X-T1 18-55 F2.8-F4 & 35 F1.4
Canon Glass   100L F2.8 IS -- 70-200L F4 -- 135L F2 -- 85 F1.8 -- 17-40L --  40 F2.8 -- 35 F2 IS  Sigma Glass  120-300 F2.8 OS -- 50 F1.4 -- 85 F1.4  Tamron Glass   24-70 2.8 VC   600EX-RT X3

MediaLockeFilmsUK

Hey chaps!

Just letting you know, that the latest;

"Built on: 2014-06-27 10:18:34 +0100
Changeset: 60c6fa5b8868"


..Nightly of Magic Lantern for the 5D Mark III running 1.2.3 firmware is very unstable with severe crashing whilst trying to record MLV RAW video with sound.

Myself and others will be discussing the software in depth tomorrow 11am ET on the Planet5D LIVE podcast with planetMitch and friends. We look forward to answering your questions, and building some informative discussion. See you there.

-Charlie  8)

a1ex

Steps to reproduce? What was the latest build that worked fine with the same settings?

I suggest reporting the bug here and announcing the podcast in a separate thread (General Chat? not sure where else it may fit)

josepvm

Sorry.  I'm still trying to find the missing stubs for 500D, in order to have nightly builds working again for this camera.

I've posted new data here: https://bitbucket.org/hudson/magic-lantern/commits/03bb4ef73a77a5bf4b4dbb05c8b473f789439bb2?at=gui-timers

Please, if a developer could take a look at it, I will appreciate very much your help  ;)

liciniobta

Hi, anyone else had trouble installing the ML on Canon 1100d 64gb class 6 SD card ScanDisk? is giving me an error to remove card and battery .. Just managed to install in 8Gb card also scandisk. It was cool that there was a firmware update for suportaro 64GB, especially for timelapse  8)

dmilligan