Nightly Builds - try the very latest stuff here

Started by a1ex, October 11, 2012, 01:55:31 PM

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

zuzukasuma

Quote from: nanomad on September 10, 2013, 09:16:34 AM
The 1100D is undergoing work to support raw if possible. The builds will resume shortly

magic lantern complier / VM gone too, where can I download it?
in a complicated relationship with eos m.

tron

Including DUAL_ISO is the best way to have the still shooters check the builds and not stick to a specific date only...

tron

@nanomad: Is there a reason for not including dual_iso specifically in the nightly builds?  :(

nanomad

Not really. As a matter of fact it will be included in the next builds
EOS 1100D | EOS 650 (No, I didn't forget the D) | Ye Olde Canon EF Lenses ('87): 50 f/1.8 - 28 f/2.8 - 70-210 f/4 | EF-S 18-55 f/3.5-5.6 | Metz 36 AF-5


Audionut

There's something new in the latest builds.

I wonder what it is?

Kim

I see in http://builds.magiclantern.fm/#/ that 5D3, 6D are now present. May be one should change the introductory message? Only the 7D remains out. I hope to see it join soon.

Rewind

Seems like false color doesn't work in video mode (550D, 650D) in latest nightly.

a1ex

All overlays are actually broken. Revert 9df7df6 and it should be fine.

For anyone who merges pull requests: please try the code before merging. I know it takes a few minutes, but it should avoid embarrassing situations like this.

nanomad

Sorry about that, but we shouldn't approve untested changes either IMHO.
Anyway, I've kindly asked the built bot to rebuild everything. All builds should be good to go in a couple of hours
EOS 1100D | EOS 650 (No, I didn't forget the D) | Ye Olde Canon EF Lenses ('87): 50 f/1.8 - 28 f/2.8 - 70-210 f/4 | EF-S 18-55 f/3.5-5.6 | Metz 36 AF-5

Crey23

Quick Noob question....I have a 650D/  I wnt to install the latest NB, but do I need to install the stable 2.3, and then the NB?  I have not found instructions for the install process with nightlys.

Thanks!

nanomad

You can go straight to the nightly builds. Check the 650D thread for installation instructions
EOS 1100D | EOS 650 (No, I didn't forget the D) | Ye Olde Canon EF Lenses ('87): 50 f/1.8 - 28 f/2.8 - 70-210 f/4 | EF-S 18-55 f/3.5-5.6 | Metz 36 AF-5

Joseriul

Canon Eos   T3/1100D Mark Free - EF-S 18-55 III - EF 75-300 II - EF 50mm f/1.8 II

nanomad

EOS 1100D | EOS 650 (No, I didn't forget the D) | Ye Olde Canon EF Lenses ('87): 50 f/1.8 - 28 f/2.8 - 70-210 f/4 | EF-S 18-55 f/3.5-5.6 | Metz 36 AF-5

Doyle4

Latest build 18th Sept, on 600D, when using Aettr set to press set, deflicker activated and intervalometer, camera crashes after 5 shots sometimes less... camera hangs, need to remove battery and boots backup saying "camera was not shut down properly, skipping modules". Back to 15th Sept and not happening there.

a1ex

Incomplete descripton => can't help. No 600D to try.

kichetof

Quote from: Doyle4 on September 18, 2013, 02:18:26 PM
Latest build 18th Sept, on 600D, when using Aettr set to press set, deflicker activated and intervalometer, camera crashes after 5 shots sometimes less... camera hangs, need to remove battery and boots backup saying "camera was not shut down properly, skipping modules". Back to 15th Sept and not happening there.

Same problem with Tragic Lantern 2.0 (Tragic_Lantern_50D109-Andy600.Build.2013Sep08) on Canon 50D (AETTR set to always on), crash after 5-10 shots. Maybe it's useful!
Crashes only when post deflicker activate!

Doyle4

Yeah noticed same kichetof, when deflicker is active camera crashes.

Going to put back on latest build and see if i can reproduce and film it.

Doyle4

Reproduces all the time. Deflicker disabled it doesn't happen. Image after video to show what it says when camera boots backup, tested again with 15th Sept build before battery died and didn't reproduce.




This is fixed on 17th build. on latest build 19th (20th saying failed so not tested) still remains,

jorluk

Hi All,
happy to be here :)
I've installed 2.3 NEXT 2013Sept18. 5D3113  (Built on 2013-09-17) on my 5DmkIII. (previously I downgraded 5D mkIII from 1.2.1 to 1.1.3)
When recording raw, audio metering goes ok, they move with sound, but there are missing .wav files on CF card :(((   only .raw
FPS override is off.
any ideas please???
Thank you so much

Jors

RenatoPhoto

It is disabled, used other device for recording.
Search before you post!!!!!
http://www.pululahuahostal.com  |  EF 300 f/4, EF 100-400 L, EF 180 L, EF-S 10-22, Samyang 14mm, Sigma 28mm EX DG, Sigma 8mm 1:3.5 EX DG, EF 50mm 1:1.8 II, EF 1.4X II, Kenko C-AF 2X

Doyle4

Screen shot crashes Canon 600D, have to remove battery. Thought id let you guys know.

Tested on 5Dmkii, does not crash camera.

a1ex

Can you post the memory screenshots here? www.magiclantern.fm/forum/index.php?topic=8358

(take a picture of the screen if it still fails)


Jason Montalvo

Sorry if i'm posting in the wrong place, but bravo on the new font choice on the 5D3 !! It's so clean