Author Topic: Nightly Builds - try the very latest stuff here (Read 1196675 times)

tron · « **Reply #200 on:** August 29, 2013, 02:22:53 PM »

Why ? It worked perfectly. I will miss it. In fact I had used it one day and the next I had loaded the latest ML and I realized afterwards that my supposedly -5 shots were taken at -2! (At -2 moon was burned beyond recovery in contrast to -5 previous day where an additional -2 at Camera raw restored it fully).

Do you fear a possible problem and you stop it at Av?

a1ex · « **Reply #201 on:** August 29, 2013, 02:31:11 PM »

Because I don't want to break Canon limits without good reason.

tron · « **Reply #202 on:** August 29, 2013, 02:54:43 PM »

At least can the 5EV limit for manual mode be raised to say 7 or 9?

But this is more like a new feature request rather than a fix request and I understand if it will be denied for other more important things which we all know what these are

tron · « **Reply #203 on:** August 29, 2013, 02:56:01 PM »

The reason is for a second frame to be taken immediately at this large EV difference

grogan197 · « **Reply #204 on:** August 31, 2013, 12:55:47 AM »

Just switched to nightly from 2.3 but can't spot the bulb ramping options. Have they been moved / removed? Cheers

nanomad · « **Reply #205 on:** August 31, 2013, 07:18:20 PM »

Yes, use ETTR + Post deflicker scripts.

BTW, the new nightly builds site is up & running: http://builds.magiclantern.fm
Make sure you download the correct version for your camera.

Stedda · « **Reply #206 on:** August 31, 2013, 07:40:30 PM »

This is EPIC!

Thanks to all!

chilimac02 · « **Reply #207 on:** August 31, 2013, 10:38:57 PM »

Still no sl1/100d even though it was posted on Facebook

swinxx · « **Reply #208 on:** August 31, 2013, 10:49:49 PM »

awesome! thx

parrotboy · « **Reply #209 on:** August 31, 2013, 11:49:58 PM »

Just want to make sure, im using a 600d running one of the newest ML nightlies, if I order the Sescom 550D HOCF cable it'll allow me to monitor audio, correct? Just making sure this feature works on the 600D

nanomad · « **Reply #210 on:** September 02, 2013, 05:50:45 PM »

Quote from: tron on August 29, 2013, 02:54:43 PM

At least can the 5EV limit for manual mode be raised to say 7 or 9?

But this is more like a new feature request rather than a fix request and I understand if it will be denied for other more important things which we all know what these are

Yes, this feature is waiting to be merged. It will be available starting from towrrow's nightly builds

Jason Montalvo · « **Reply #211 on:** September 02, 2013, 08:38:23 PM »

anyone else having issues with the 5DMK3 build? Every time I try to load the modules it says that their already loaded and doesn't allow them to load.

nanomad · « **Reply #212 on:** September 02, 2013, 09:10:53 PM »

Well maybe they are loaded? Latest builds have autoload on boot enabled by default

RenatoPhoto · « **Reply #213 on:** September 02, 2013, 10:05:38 PM »

Quote from: Jason Montalvo on September 02, 2013, 08:38:23 PM

anyone else having issues with the 5DMK3 build? Every time I try to load the modules it says that their already loaded and doesn't allow them to load.

1st Note that the menu has changed, now the modules are by default not enabled.
2nd Enable the modules that you want to use
3rd Turn camera off and on.

The modules will be loaded

The Load modules now does not work correctly, will have to be fixed. The default setting is Autoload modules on startup so use it for now!

a1ex · « **Reply #214 on:** September 02, 2013, 10:10:31 PM »

Quote from: RenatoPhoto on September 02, 2013, 10:05:38 PM

The Load modules now does not work correctly, will have to be fixed.

Which part does not work?

Stedda · « **Reply #215 on:** September 02, 2013, 10:30:09 PM »

Im getting Old API on File Manager and Picture Viewer.... everything else works fine for me with Autoload after changing them all to On.

This is with this AMs nightly.

RenatoPhoto · « **Reply #216 on:** September 02, 2013, 10:45:49 PM »

Quote from: a1ex on September 02, 2013, 10:10:31 PM

Which part does not work?

On the first boot enable the modules that you want loaded..
Press Load modules now..
Get message on bottom left screen:

Init moudules..
modules loaded
Modules already loaded.

tron · « **Reply #217 on:** September 03, 2013, 02:59:30 AM »

ML2.3 Unified updated with ML night build unified 3 Sep on 5D2:

arcanoid, file_man, pic_view: oldAPI

Since Dual ISO wasn't available I tried:

ML2.3 Unified updated with af839274b1fa.zip (DUAL ISO for 5D2) to get dual_iso and then updated with ML night build for 5D2 (3 Sep).

Same result: arcanoid, file_man, pic_view: oldAPI

a1ex · « **Reply #218 on:** September 03, 2013, 07:43:55 AM »

They have to be recompiled.

tob · « **Reply #219 on:** September 03, 2013, 10:55:46 AM »

Two builds failed:

EOSM.116
This Build Failed!

1100D.105
This Build Failed!

tron · « **Reply #220 on:** September 03, 2013, 01:19:06 PM »

Can the dual_iso module be included in the night builds?

Jason Montalvo · « **Reply #221 on:** September 04, 2013, 01:55:16 AM »

Quote from: RenatoPhoto on September 02, 2013, 10:05:38 PM

1st Note that the menu has changed, now the modules are by default not enabled.
2nd Enable the modules that you want to use
3rd Turn camera off and on.

The modules will be loaded

The Load modules now does not work correctly, will have to be fixed. The default setting is Autoload modules on startup so use it for now!

My Gratitude to you ! Thanks Renato

vstrglv · « **Reply #222 on:** September 04, 2013, 08:55:43 AM »

Quote from: tron on September 03, 2013, 01:19:06 PM

Can the dual_iso module be included in the night builds?

I am interested too.

blindcat · « **Reply #223 on:** September 04, 2013, 10:48:29 AM »

I would like to access the nightly build from June 11 2013. Any way to get it anymore?
If not, I dislike the new page :-( Else ... I like it :-)

a1ex · « **Reply #224 on:** September 04, 2013, 10:49:53 AM »

What's so special about it? My calendar shows September...

News:

Author Topic: Nightly Builds - try the very latest stuff here (Read 1196675 times)