crop_rec_4k derived builds for 700D / T5i

Started by dfort, April 02, 2019, 01:34:30 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Walter Schulz

Web archive "Wayback machine" helps (as so often):
https://web.archive.org/web/20200717085052/https://bitbucket.org/Dannephoto/magic-lantern/downloads/crop_rec_4k_mlv_snd_isogain_1x3_presets_2019Apr02.700D115.zip

clubsoda

Quote from: Walter Schulz on August 20, 2020, 10:52:43 AM
Web archive "Wayback machine" helps (as so often):
https://web.archive.org/web/20200717085052/https://bitbucket.org/Dannephoto/magic-lantern/downloads/crop_rec_4k_mlv_snd_isogain_1x3_presets_2019Apr02.700D115.zip

Thanks! :)

clubsoda

First thank you all for making this possible! I have a question for you guys! :) I hope you can help me. I enabled 14bit lossless raw on latest danne build with the new uhs module and set the resolution to 4:3 1440x1080 which gives me an insanely usable recording option in 25fps continues. I installed the mosaic engineering olpf and image quality is lovely in my opinion especially for the 700d some aliasing but very usable. Now to my question: When i enable this resolution and set the preview to realtime there are the magic lantern top and bottom bars covering the full 4:3 image preview on top and bottom in live view. Then i set the screen layout to 16:10 hdmi under display advanced setting. When i press and relase half shutter now i can see the full 4:3 image getting visible behind these bars which would give me the perfect live view except the top and bottom bar covering it but it looks like the camera can at least display it. When i hit record now the preview gets cut behind top and bottom again and the full 4:3 preview is gone again. I would then have to stop and press half shutter again for a second for getting it back. Is there a way to show the full realtime preview while recording and further if possible: also move the top and bottom bar so that it gets more visible? I still want the magic lantern info to be seen so clear overlays isn't helping much. Thank you!

edit: i also found 1600x1160 and 1736x1160 to be working even better with even less aliasing. you have to be a little careful with exposure as it is not perfect stable but it runs very good! Awesome! Now fixing liveview would hit the nail :0

loveSingh

eeee....im really a noob here...
but can u help me ...whenever i press record it alows me to record only few secs.
i m also not able to find sd card overclock option ...!!!!

GeorgeX

Quote from: clubsoda on August 22, 2020, 12:46:00 PM
First thank you all for making this possible! I have a question for you guys! :) I hope you can help me. I enabled 14bit lossless raw on latest danne build with the new uhs module and set the resolution to 4:3 1440x1080 which gives me an insanely usable recording option in 25fps continues. I installed the mosaic engineering olpf and image quality is lovely in my opinion especially for the 700d some aliasing but very usable. Now to my question: When i enable this resolution and set the preview to realtime there are the magic lantern top and bottom bars covering the full 4:3 image preview on top and bottom in live view. Then i set the screen layout to 16:10 hdmi under display advanced setting. When i press and relase half shutter now i can see the full 4:3 image getting visible behind these bars which would give me the perfect live view except the top and bottom bar covering it but it looks like the camera can at least display it. When i hit record now the preview gets cut behind top and bottom again and the full 4:3 preview is gone again. I would then have to stop and press half shutter again for a second for getting it back. Is there a way to show the full realtime preview while recording and further if possible: also move the top and bottom bar so that it gets more visible? I still want the magic lantern info to be seen so clear overlays isn't helping much. Thank you!

edit: i also found 1600x1160 and 1736x1160 to be working even better with even less aliasing. you have to be a little careful with exposure as it is not perfect stable but it runs very good! Awesome! Now fixing liveview would hit the nail :0

Hi, did u get these resolutions with the crop mode, or regular mode?
Also, where dis u get the uhs module from?

Thanks!

clubsoda

Quote from: GeorgeX on August 26, 2020, 01:37:56 PM
Hi, did u get these resolutions with the crop mode, or regular mode?
Also, where dis u get the uhs module from?

Thanks!

Regular mode with 3:2 aspect ratio set. Try this build (although an older build worked too for me) and add the uhs module from the second link. Then enabled it and set it to 240mhz (i use sandisk extreme pro 170). Quite amazing stuff, it would be awesome to fix live view now but disabling overlays can help to get your full frame. You could also record the 3:2 resolution and roughly crop to 16:9 in post adding some options for reframing and you get what you see in the 16:9 view in camera :)

https://web.archive.org/web/20200717085052/https://bitbucket.org/Dannephoto/magic-lantern/downloads/crop_rec_4k_mlv_snd_isogain_1x3_presets_2019Apr02.700D115.zip

https://www.magiclantern.fm/forum/index.php?topic=12862.msg228673#msg228673

ML700D

Quote from: Walter Schulz on August 20, 2020, 10:52:43 AM
Web archive "Wayback machine" helps (as so often):
https://web.archive.org/web/20200717085052/https://bitbucket.org/Dannephoto/magic-lantern/downloads/crop_rec_4k_mlv_snd_isogain_1x3_presets_2019Apr02.700D115.zip

I have installed ML from theBilalFakhouri's build, is it ok to install this build in other sd card without uninstall the previous build?
EOS 700D

theBilalFakhouri

Quote from: ML700D on April 24, 2021, 08:37:47 PM
I have installed ML from theBilalFakhouri's build, is it ok to install this build in other sd card without uninstall the previous build?

Yes!

I have three SD cards, each SD card have a different build, it's totally okay to hot swap SD cards with different builds installed in each SD card.

ML700D

Quote from: theBilalFakhouri on April 24, 2021, 08:43:10 PM
Yes!

I have three SD cards, each SD card have a different build, it's totally okay to hot swap SD cards with different builds installed in each SD card.

Oh.. I see. Thanks.  :D
EOS 700D