EOS R6 1.2.0 Downgrade / Rollback Tutorial (Alternate method)

Started by yourboylloyd, November 20, 2020, 08:19:50 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

yourboylloyd

The battery door trick that has been used to downgrade the 5D3 and other models so far that we've known does not work on the EOS R6. If you try and open the battery door or the card door, the camera and LCD will stay on: Nevermind it does work. But you have to be EXTREMELY fast to catch it. This method below works though:


Instead, you'll need two SD cards. It won't work if you have only one. Follow these steps:

- copy NEW/CURRENT firmware to the card - insert into camera.
- launch Update Firmware from Canon menu, click OK
- open the CARD door ASAP, but don't remove the card or it won't work and will give an error message
- QUICKLY insert a SECOND card with the older firmware on it into the other card slot
-
- If done correctly, the above menu should pop up. Select the older firmware and install


I'm not sure if this method works on the R5 or any other camera. I would caution against updating to newer firmware in the future and for other models. Especially if the camera only has one card slot like the EOS RP or R or m50.
Join the ML discord! https://discord.gg/H7h6rfq

wib

EOS 5D3 123 crop_rec_4k_mlv_snd_isogain_1x3_presets_2020Dec11.5D3123

yourboylloyd

Out of the 8 battery door open attempts that I tried, I was unsuccessful on 3 of them. It's almost simultaneous timing with the button push on the update screen.
Join the ML discord! https://discord.gg/H7h6rfq

c_joerg

What is the advantage of this method?
With eos utility a Downgrade works also...
EOS R

yourboylloyd

Quote from: c_joerg on November 23, 2020, 03:40:42 PM
What is the advantage of this method?
With eos utility a Downgrade works also...

Does it really? It historically didn't work. I guess I never considered doing that.
Join the ML discord! https://discord.gg/H7h6rfq

c_joerg

Quote from: yourboylloyd on November 24, 2020, 07:06:14 AM
Does it really?

With the reference to this link someone tried it in the German DSLR forum:
With the R6 from 1.2.0 to 1.1.1 it worked eos utility .
EOS R