Danne's crop_rec_4k, 5DIII

[wib]

From my experience, it's easy to get continuous recording.

card spanning, 14 bit lossless selected and also 10 bits enabled on top, in 3.5K 1:1 at the maximum resolution (for me 2:20 ratio and 3584x1630)

I set up 2 display mode : one with no global drawing, and with the push of a button, one with normal framing, the record never stops, only the status dot changes from green to orange doing so, but you have to go back to no global drawing.

[vastunghia]

Thank you wib,

I would prefer to stick to full 14-bit depth, but I'm curious to hear from your experience: do you find that 10 bits are enough even for complex scenes with a heavily stretched dynamic range?

Anyway, I'm very interested in the possibility of temporarily switching Global Draw on during recording. I did't think this was possible. Could you please explain exactly how to configure this? EDIT: I guess it was the old INFO button. Got it now

Thanks a lot

Sergio

[MCChristor]

@Danne

Possible to get 12bit 4096x1440 25FPS working? When activating 12bit it does crash with some errors and works normal with 14bit (but stops after few seconds). Should be almost continuous with 12bit.

[JayJayProductions]

How can I install the module to my 1.2.3 nightly build on my 5d mark III? sorry for the noob question

[Walter Schulz]

How can I install the module to my 1.2.3 nightly build on my 5d mark III? sorry for the noob question

You will most likely fail to install/use a single module from a custom build if you are running nightly. You should install the build completely. See https://wiki.magiclantern.fm/faq -> Installation

[anto]

Hi guys. What is the max res that gives real-time preview on the MKIII?

[Bruno Italiano]

I can see more information in the colour.
× Bitdepth OFF
× ratio OFF
×14bit lossless
×No sound
×Frozen LV
×kill canon GUI
×don't kill global draw
×Card Spanning
×One more hack
×Ivface +aewb
With these settings even Magic Zoom works and Follow Focus Arrows with the autofocus of the lens.

[wib]

Hi guys. What is the max res that gives real-time preview on the MKIII?

all is real time.

1080P with correct framing and 2K, 4K, 5K.. are also real time but with cropped framing.

[koopg]

I can see more information in the colour.
× Bitdepth OFF
× ratio OFF
×14bit lossless
×No sound
×Frozen LV
×kill canon GUI
×don't kill global draw
×Card Spanning
×One more hack
×Ivface +aewb
With these settings even Magic Zoom works and Follow Focus Arrows with the autofocus of the lens.

Please can you explain what is
Magic zoom
And what is do. You mean autofocus ? Can you autofocus with 5d3 during video rec?


Sent from my SM-P905 using Tapatalk

[Walter Schulz]

Please can you explain what is
Magic zoom

https://wiki.magiclantern.fm/camera_help#magic_zoom

[anto]

all is real time.

1080P with correct framing and 2K, 4K, 5K.. are also real time but with cropped framing.

yeh, I mean real time correct framing.
how much cropped others?

same way via hdmi?

[koopg]

https://wiki.magiclantern.fm/camera_help#magic_zoom

thank you.

Sent from my SM-N975F using Tapatalk

[Wushuliu]

yeh, I mean real time correct framing.
how much cropped others?

same way via hdmi?

I would like to know the preview framing/crop specifics as well. Contemplating getting a 5D3...

[gravitatemediagroup]

the newer 113 build under construction or has the DL location changed? Sorry if I missed any news/info regarding this

[theBilalFakhouri]

The ones with the new LiveView hacks?

Here you go:

-5D3.113
crop_rec_4k_mlv_snd_isogain_1x3_presets_2022Apr07.5D3113.zip

-5D3.123
crop_rec_4k_mlv_snd_isogain_1x3_presets_2022Apr07.5D3123.zip

More info about them:
LiveView hacks (write speed improvement)

[winmediacenter]

Great job works like a charm

Continous UHD 3840x1536 12bit by holding from time to time halfshutter with clear overlays option enabled

[data1706]

Hello,
i'm using Danne's build to capture timelapses and it works very well. Often i'm using the preset "Full-res Live View" which works with 7,4 fps. For many timelapses this framerate is to fast and i need maybe 1-3 fps. Unfortunately the fps override function isn't working. Is it possible to create custom profiles with custom framerates?

thanks
data1706