Author Topic: Danne's crop_rec_4k, 5DIII  (Read 136735 times)

wib

  • Member
  • ***
  • Posts: 114
Re: Danne's crop_rec_4k, 5DIII
« Reply #950 on: July 09, 2021, 03:06:27 PM »
Be sure to use a fast reader, at least USB 3.0 and "UDMA7 cards" compatible.
EOS 5D3 123 crop_rec_4k_mlv_snd_isogain_1x3_presets_2020Dec11.5D3123

stef7

  • New to the forum
  • *
  • Posts: 13
Re: Danne's crop_rec_4k, 5DIII
« Reply #951 on: July 09, 2021, 04:10:24 PM »
You are absolutely right ! Nothing wrong with recording. It played OK in camera, no damaged frames. Card reader is OK actually, when plugged to a fast USB 3.0 port it works OK
Problem was when card reader was on a slow USB2 port. Never had a problem with this USB 2 port. It was slow but worked.
 
Anyway, thanks for the help and apologies for bugging you with something that is way off ML
But sometimes it's just a bad day and my brain doesn't work as it should :)

By the way with kill global draw 3584x1730 (2:1 my favorite ratio) at 10 bit recording times are excellent. Way more that expected !
Again thanks a lot for your work and help.


wib

  • Member
  • ***
  • Posts: 114
Re: Danne's crop_rec_4k, 5DIII
« Reply #952 on: July 09, 2021, 04:43:23 PM »
I do the same, 2:20 ratio, 14bits lossless in raw menu and 10 bits in movie menu (I guess it override ?) 3.5K in 3584x1630 with kill global draw option, card spanning and sd overclocked, it's marvelous.
EOS 5D3 123 crop_rec_4k_mlv_snd_isogain_1x3_presets_2020Dec11.5D3123

kpn

  • New to the forum
  • *
  • Posts: 6
Re: Danne's crop_rec_4k, 5DIII
« Reply #953 on: July 18, 2021, 02:13:31 PM »
Amazing work Danne, the anamorphic 5.5k preset is great!
Just a one small request, is it possible to format the card yet keep the Magic Lantern as in the nightly builds?

wib

  • Member
  • ***
  • Posts: 114
Re: Danne's crop_rec_4k, 5DIII
« Reply #954 on: July 18, 2021, 03:55:38 PM »
that would help also the bug on mac catalina with the folder’s « bit »
EOS 5D3 123 crop_rec_4k_mlv_snd_isogain_1x3_presets_2020Dec11.5D3123

Danne

  • Developer
  • Hero Member
  • *****
  • Posts: 7196
Re: Danne's crop_rec_4k, 5DIII
« Reply #955 on: July 18, 2021, 04:21:35 PM »
Conflict when sd_uhs patch is used when formatting. Sorry, won't change back.
If someone adds a safeguard turning off sd_uhs patch selecting format it could be an option added.

Peperoros

  • New to the forum
  • *
  • Posts: 5
Re: Danne's crop_rec_4k, 5DIII
« Reply #956 on: July 19, 2021, 04:20:00 PM »
I ran into the problem with flickering when using this build, anamorphic 1:3 binning, 14bit, dual iso, v1.2.3. If I have understood this correctly, it's the dual iso that's the culprit.
ONLY happened when I recorded clouds. Several recordings between are all normal.

https://streamable.com/8vp8z4

I'm unsure if this is the correct thread to report this. Saw that there was flickering reported for the eos-m version of this build, so I'm hoping I'm not mistaken.

Digidagi

  • Just arrived
  • *
  • Posts: 1
Re: Danne's crop_rec_4k, 5DIII
« Reply #957 on: September 09, 2021, 01:06:54 PM »
Hey everyone,
I've been following and experimenting with magic lantern for a while. Gotta say it's amazing and thank you for the hard work.

I'm on build crop_rec_4k_mlv_snd_isogain_1x3_presets_2021Apr01.5D3113
As of today which crop modes support real-time correct framing? So far I could make 1920 1:1 work. Any chance for any of the ones with raised resolution?

Thank you for your answers.

GullRaDriel

  • New to the forum
  • *
  • Posts: 45
Re: Danne's crop_rec_4k, 5DIII
« Reply #958 on: September 09, 2021, 09:36:08 PM »
Hi Danne,
I'm willing to contribute but I'm unable to make a build from source.
Can you give me some pointers on how to build https://bitbucket.org/Dannephoto/magic-lantern_dannephoto_git/src on Linux Debian or Windows 10 (msys2 or cygwin) ?
Or do you have a pinned forum post explaining exactly this ?

Danne

  • Developer
  • Hero Member
  • *****
  • Posts: 7196
Re: Danne's crop_rec_4k, 5DIII
« Reply #959 on: September 09, 2021, 10:32:48 PM »
What changes did you add?
Sorry, but unable to help but there are several guides on this forum about compiling.

names_are_hard

  • Developer
  • Senior
  • *****
  • Posts: 420
  • 200D idiot
Re: Danne's crop_rec_4k, 5DIII
« Reply #960 on: September 10, 2021, 12:13:14 AM »
GullRaDriel - walking you through building a repo is probably better suited for Discord.  You're likely to have a few problems along the way and it's slow fixing them one at a time on a forum.  I can walk you through build problems.  I don't know if cygwin works.  Debian definitely does, I use that.  Pretty sure WSL is known to work also.

trapshitkalci

  • New to the forum
  • *
  • Posts: 17
Re: Danne's crop_rec_4k, 5DIII
« Reply #961 on: September 13, 2021, 04:28:28 PM »
Having problem with the display preview in anamorphic mode. Latest built : 2021 Apr. 1 ,  LCD display preciew. Stays distorted whatever I try. I am on firmware 1.2.3. Can that be the problem ?  Was anamorphic mode tested on 1.2.3 ?
In RAW video submodule  Preview is set to Framing but the green icon in front is simply faded. Is that a bug in 1.2.3 which doesn't appears on 1.1.3 ?

Nnow tried it with firmware 1.1.3 and problem is solved ! I didnt pressed the INFO button enough times for getting the Magic Lantern view on my LCD display. To find this out it really needed e the 1.1.3. version cause the info bar on the bottom of the Framing Preview didnt said it  with the 1.2.3 It said couldn't able framing preview due to GlobalDraw.
5D MK3 1.1.3 and Danne's latest build with Sandisk Extreme CF card (120mb/sec reading speed, writing is less of course), 60D Nightly Build

GullRaDriel

  • New to the forum
  • *
  • Posts: 45
Re: Danne's crop_rec_4k, 5DIII
« Reply #962 on: September 15, 2021, 10:59:45 PM »
Danne: I did not make any change but following the guides led me to some errors. May be my fault/ bad arm version / etc

Okay, as stated I'm going to seek help on discord. See you in a few days !

ShittyWebsite

  • New to the forum
  • *
  • Posts: 18
Re: Danne's crop_rec_4k, 5DIII
« Reply #963 on: November 05, 2021, 07:34:14 PM »
Does silent pics works? i've tryied full res lv but it says it needs crop rec to be loaded (it dosent show any modules)

Maybe i did something wrong? (1.1.3)

Walter Schulz

  • Contributor
  • Hero Member
  • *****
  • Posts: 8124
Re: Danne's crop_rec_4k, 5DIII
« Reply #964 on: November 05, 2021, 07:36:34 PM »
Which file option is selected? DNG or MLV?

Danne

  • Developer
  • Hero Member
  • *****
  • Posts: 7196
Re: Danne's crop_rec_4k, 5DIII
« Reply #965 on: November 05, 2021, 07:51:13 PM »
Does silent pics works? i've tryied full res lv but it says it needs crop rec to be loaded (it dosent show any modules)

Maybe i did something wrong? (1.1.3)
Crop rec is on always. I enabled most modules default and not as an option to the user to turn on or off in this build.

ShittyWebsite

  • New to the forum
  • *
  • Posts: 18
Re: Danne's crop_rec_4k, 5DIII
« Reply #966 on: November 05, 2021, 08:56:37 PM »
I'm using full-res LV, MLV

It says:

Full-res LV requires the crop_rec module loaded


Danne

  • Developer
  • Hero Member
  • *****
  • Posts: 7196
Re: Danne's crop_rec_4k, 5DIII
« Reply #967 on: November 05, 2021, 09:43:36 PM »
Did you try it to see if it works?

ShittyWebsite

  • New to the forum
  • *
  • Posts: 18
Re: Danne's crop_rec_4k, 5DIII
« Reply #968 on: November 05, 2021, 09:46:39 PM »
I also tryied using the experimental build

No files on the folder  :-[

Maybe a problem with the camera settings?

ShittyWebsite

  • New to the forum
  • *
  • Posts: 18
Re: Danne's crop_rec_4k, 5DIII
« Reply #969 on: November 05, 2021, 09:52:18 PM »
I also tryied using the experimental build

No files on the folder  :-[

Maybe a problem with the camera settings?

I just fully reset the camera and now everything works


Dammmn I'm stupid

ShittyWebsite

  • New to the forum
  • *
  • Posts: 18
Re: Danne's crop_rec_4k, 5DIII
« Reply #970 on: November 05, 2021, 10:33:07 PM »
ok.. the experimental build works for full res lv


danne's build works, but not full res (2080x1318)

https://imgur.com/a/HfFSA0G


edit:
maybe i should try to update to 1.2.3?




Thoracius

  • New to the forum
  • *
  • Posts: 3
Re: Danne's crop_rec_4k, 5DIII
« Reply #971 on: November 06, 2021, 12:19:31 AM »
I'm curious.. is 3x3 binning of the whole sensor possible (e.g. 1920x1280) or would that be too heavy to achieve reasonable frame rates?


allemyr

  • Senior
  • ****
  • Posts: 315
Re: Danne's crop_rec_4k, 5DIII
« Reply #972 on: November 10, 2021, 11:37:47 AM »
Hi!

I'am using 2020May29.5D3123 crop rec 4k mlv snd isogain build, I'am trying out shooting in 3840x1440px and would like to turn on SD overclock, is that possible with this build and where can I please find it? I have card spanning on and get pretty decent record times right now in 3840x1440px at 14-bit lossless but SD overclock could be sweet.

Thx in advance!

/ Karl

theBilalFakhouri

  • Developer
  • Hero Member
  • *****
  • Posts: 741
Re: Danne's crop_rec_4k, 5DIII
« Reply #973 on: November 10, 2021, 11:49:43 AM »
Latest Danne build from the first post have what you need, why not to use it?

Not sure if 2020May29.5D3123 build has SD overclocking module.
700D 1.1.5 | no more ISOless LV err 8 / SDR104 @ 240 MHz - Constant! | Fixed Scrambled LiveView in Higher resolution | Real-Time correct framing in the Way

ShittyWebsite

  • New to the forum
  • *
  • Posts: 18
Re: Danne's crop_rec_4k, 5DIII
« Reply #974 on: November 23, 2021, 02:47:09 PM »
Hello, great build, quite solid

Just a small question, i'm using:
Preset:
Full-res live view

RAW video
Preview Framing
Rec Trigger: Half-Shutter: pre only

When i start recording, press the half shutter, it captures everything fine, when i stop recording i get stuck on busy (so i can't change shutter speed, going out of livewview and back works)

SRM memory On/off didnt not help, neither Small Hacks



Also, it crashs when using rec trigger as half-shutter: hold (i'm guessing its my slow card)