Danne's crop_rec_4k, 5DIII

Started by Danne, November 09, 2018, 05:11:37 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Quentin

Thanks all for your time.
When seeing something that is "suspicious", my intention is to mention it cause I like the tools I use.
I will do some dummy tests to conclude.

SAMK

Hi Guys
idont know if im at the right place to talk about that but i saw your record using danne build and i have a question
i use Magic lantern since many years and wanted to share some test i did few days ago with my 5D3 before i sent it for maintenance using danne build with overclok SD
i did make some test and this what i got i did filming at 3K1 using spanning card 14 bit and it was recording continu at 24 FPS i did use MLV APP for convert to DNG and got file that is 7 Mo
i did calculation im not sure itswork like that but thus what i got
so 24 FPS X 7 Mo = 168 Mo/S is it possible and can we do this kind of calculation ?

masc

5D3.113 | EOSM.202

koopg


Update: I found most of my issues.

1.  I see you guys talking about 3k 1:1 (NO x5) - When i do that i have a pink screen and now record, only when X5 i can shoot 3K1:1, is this normal ?
2.  I remember danne earlier builds of which I could lower 3.5k bit rate to 12 losless, but now ML menu claim it shouldn't be done on large pixel ?

1.1.3
5d3
2020Sep14

I am getting great results from what does work using card spanning is wonderful

SAMK

i read many people said 5DM3 can not record more than 135 Mo continu at 10 bit about something like that
my calculation i got 168 Mo continu at 14 bit

masc

The bit depth does not change the overall limit. Check your MLV size, and check its length in seconds and calculate with that. Converted data is different and not what the camera recorded.
5D3.113 | EOSM.202

SAMK

Ok I see I will do it in this way
Thank you for your help

koopg

sd CARD will not go over 20M/s
Just bought a new one
none of them will go over 20mb/s

how do you guys do that ?

pepole talking about 60MB/s and saying bad one would reach 35mb
but I have 7 san disk ranging from 95/mg to 170/m
some from amazon
and a brand new one from 10 min ago from local store
20MB/s

please some one tell me what is wrong

Bender@arsch

Quote from: koopg on September 27, 2020, 10:10:30 AM
sd CARD will not go over 20M/s
Just bought a new one
none of them will go over 20mb/s

how do you guys do that ?

pepole talking about 60MB/s and saying bad one would reach 35mb
but I have 7 san disk ranging from 95/mg to 170/m
some from amazon
and a brand new one from 10 min ago from local store
20MB/s

please some one tell me what is wrong

How do you test it? And have you try SD overclocking on - > restart - > wait until patching overclocking completed and tested again?

koopg

benchmark frim ML menu (1min)
results for any of my 10 cards will not go over 20.8MB/s

I did try oc
BUT NOT REBOOT  :o

trying again...

but still did I understand wrong ? are guys working with your SD at rates higher then 20 ?
my SD does write 80 MG on my pc, I know its not 1 to 1 thing, but I see couple of posts up
claims for cheap SD to do 35Mb
and before a guy saying 55MB

so I need to know if I need to buy 50 more cards to maybe get fast one



Danne

Sd patch needs to be enabled. Unclear if so. I suggest a screen recording to exclude more quesswork.

koopg

I will be happy to share my screen capture,
but where is the sd patch thing ? are referring to SD OC option it self ?

when ever I enable OC the camera will not take 1 frame.
I press rec and its sat automatic  stop

steps:
1.  shot a video on 3.3k 16:9 I can do it for few sec - 7-10
2.  goto menu, enable SD OC
3. reboot camera
4. wait for patch done msg
5. hit rec
6. no frame is taking


then I need to reinstall ML because it would keep tell me that camera did not shut down properly
even if I disable SD OC

ok making a video to show you


koopg

https://youtu.be/_faN5NAlzHU
Please note the first rec was stopped by me, my fingers is out of frame.

But this is whats happening when i enable sd oc

The last sd card i bought  from this morrning

Sent from my SM-N975F using Tapatalk


ewinemiller

I had zero luck from a couple of the 95mb/s cards that I had laying around. It wouldn't write anything if OC was set.

A new SanDisk Extreme Pro 170mb/s worked fine.

https://photos.app.goo.gl/8bdwe99AwLLNW6vV6

Left good, right bad.

Danne

Yes, unfortunately the 170Mb/s card seems the only stable one for these regs.
I am sorry I don't have more time to spend here. Maybe there could be another patch working better here, probably is, but I am not the one that could help here atm.

koopg

170 card working !!!!!!!!!!!!!!!!!!! wow

cooooooooool
QuoteYes, unfortunately the 170Mb/s card seems the only stable one for these regs.
I am sorry I don't have more time to spend here. Maybe there could be another patch working better here, probably is, but I am not the one that could help here atm.

dont you ever be sorry to any one here !!!! you are the king

I was running this morning to get a true sdxc type 1 - the 95mb/s one
I thought this would be the key lol.

so I still didn't get answer for to the none OverClock method

should I expect more then 20mb/s ? - Is this really a set of faulty cards that I have ?
* again on pc it has 80+ mb/s

Danne

Yes. Around that unclocked. Not sure exactly.

koopg

I will just place that here :)

Sent from my SM-N975F using Tapatalk


AlexTran

Hey Danne!

I'm a big fan of your work and currently using your latest build.

I don't have a mac so I couldn't use your "switch mini" app to stich my spanned file.

Could you please make a window version so all of us window user can also try out this feature?

Thank you so much!

koopg

Quote from: AlexTran on September 29, 2020, 09:13:13 PM
Hey Danne!

I'm a big fan of your work and currently using your latest build.

I don't have a mac so I couldn't use your "switch mini" app to stich my spanned file.

Could you please make a window version so all of us window user can also try out this feature?

Thank you so much!
Download mlvapp for windows
Just import the files and extract

Sent from my SM-N975F using Tapatalk


AlexTran

Hey Koopg!

Thank you for your input but I tried it and it doesn't really work for spanned files.

Abaco

Hello all, I am interested in this build primarily for the real time live view, but upon installing it I am still getting the choppy low res view even when using the 3.3k 5x preset. I saw on the thread about maybe disabling global draw and that hasnt made a difference. If anyone can help me get that working I would appreciate it

Danne

What's not working? Where did you get info about real time preview?

Abaco

Maybe Im not understanding what is being described, for 1x 1080p recording the live view runs full resolution and real time/smooth, on other builds ive primarily recorded 2880x1440 in 5x mode but the live view for that is low resolution and slow/choppy. I took this as making the 5x liveview for higher resolutions run real time and show framing

koopg

 :D

https://www.youtube.com/watch?v=V5xNj1DW9W0&feature=youtu.be

:D

5d3 1.1.3 magic lantern
Helius 44-2 F2 1/48
Build: Denna's crop_rec_4k_mlv_snd_isogain_1x3_presets_2020Sep14.5D3113
3520X1730 16:9
14bit lossless
:D Dual ISO
card spanning on
SD card overclock 166hz