Danne's crop_rec_4k, 5DIII

Started by Danne, November 09, 2018, 05:11:37 PM

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

Quentin

I am not certain if it is possible, to drop resolution for a higher FPS.
For instance 1280x720 @ 96FPS

Dmytro_ua

Is it possible to enable proxy recording from 1920 3x3 preset?
5d3 1.2.3 | Canon 16-35 4.0L | Canon 50 1.4 | Canon 100mm 2.8 macro
Ronin-S | Feelworld F6 PLUS

Danne

What exact preset are you referring to?
When using proxy recording function also make sure you are selecting 2nd card(SD) in canon menu. This way proxy goes to sd and raw to CF.

Dmytro_ua

I've tried your latest build with 2:35.1 10bit lossless 25fps (i've got 1720x2200 px).
When I enable proxy - it's stretched and cropped. I understand, that it's somehow made from 1x3 proportions, that's why it's not usable. So, I assume, aren't these two processes independent (MLV and proxy)? Can't we somehow use nice proxies from Alex's build 1920 (3x3) with your 1x3 raw 1720x2200 px?
5d3 1.2.3 | Canon 16-35 4.0L | Canon 50 1.4 | Canon 100mm 2.8 macro
Ronin-S | Feelworld F6 PLUS

Danne

Na, that would mean a corrected liveview output parallell to shooting raw. The holy graal if you so like ;)

Dmytro_ua

Hi, Danne!

I'm sorry, maybe it was mentioned before, but I cannot find an information about what your lua script exactly do? I mean step-by-step
5d3 1.2.3 | Canon 16-35 4.0L | Canon 50 1.4 | Canon 100mm 2.8 macro
Ronin-S | Feelworld F6 PLUS

Danne

Why not test it? It sets optimised settings for anamorpic 2.39:1 recordings.

Dmytro_ua

Quote from: Danne on July 26, 2019, 11:44:57 AM
Why not test it? It sets optimised settings for anamorpic 2.39:1 recordings.

I did try. But I shoot mostly with 2.35:1, so I want to be sure, if I change 2.39 to 2.35, I won't mess anything else.
5d3 1.2.3 | Canon 16-35 4.0L | Canon 50 1.4 | Canon 100mm 2.8 macro
Ronin-S | Feelworld F6 PLUS

Danne

No. That's fine. Once you run the script you are free to change anything after.

Dmytro_ua

Quote from: Danne on July 26, 2019, 12:54:24 PM
Once you run the script you are free to change anything after.

So, what the script is actually doing? Can I do the same manually from ML menu?
I'm just curious, it would be nice to read some description of it. But if you're busy, don't bother ;)
5d3 1.2.3 | Canon 16-35 4.0L | Canon 50 1.4 | Canon 100mm 2.8 macro
Ronin-S | Feelworld F6 PLUS

Danne

Yes, manually. It's only a helper script to get going. Originally created eosm on mind.

ibrahim

Anyone knows how to record continuous at 14-bit lossless at 1440p 24fps? I get pinky/black preview on my LCD screen.

These are my selected settings:
Global draw: liveview
fps override: 24 fps
crop mode: 4K 1:1 and x3crop set

RAW video:
2656x1494
16:9
14-bit lossless
preview: realtime
croprec preview: auto mode
kill global draw on
sound on at 48khz

Any tips on what I am doing wrong?
Using build 2019-07-20 on 5d mark III firm.123
Canon 5D Mark IIIs | Ronin-M | Zeiss 50mm 1.4 planar | Zeiss 35mm 1.4 distagon  | Zeiss 24mm f2 distagon | Zeiss 85mm f1.4 planar
Dual sound system: Tascam DR-60d MKII | Audio Technica AT899 | Sennheiser MKE 600

ibrahim

Quote from: ibrahim on August 07, 2019, 10:03:18 AM
Anyone knows how to record continuous at 14-bit lossless at 1440p 24fps? I get pinky/black preview on my LCD screen.

These are my selected settings:
Global draw: liveview
fps override set at 24 fps
crop mode: 4K 1:1 and x3crop set

RAW video:
2656x1494
16:9
14-bit lossless
preview: realtime
croprec preview: auto mode
kill global draw on
sound on at 48khz

Any tips on what I am doing wrong?
Using build 2019-07-20 on 5d mark III firm.123
Canon 5D Mark IIIs | Ronin-M | Zeiss 50mm 1.4 planar | Zeiss 35mm 1.4 distagon  | Zeiss 24mm f2 distagon | Zeiss 85mm f1.4 planar
Dual sound system: Tascam DR-60d MKII | Audio Technica AT899 | Sennheiser MKE 600

ibrahim

With a slight modification of the aspect ratio (1:2 in raw menu and 2.35 in crop rec menu) and resolution to 1808x2300 in 14-bit lossless of the cinema lua script I managed to get automatically the following in MLVapp:

5424x2300

Just to make sure I have understood this script correctly. Does this signify that the streching by 3-fold 1808x2300 to 5424x2300 does not result in any loss of pixels? Meaning that pixels had been squeezed and then streched back making this true genuine 4k footage?
Canon 5D Mark IIIs | Ronin-M | Zeiss 50mm 1.4 planar | Zeiss 35mm 1.4 distagon  | Zeiss 24mm f2 distagon | Zeiss 85mm f1.4 planar
Dual sound system: Tascam DR-60d MKII | Audio Technica AT899 | Sennheiser MKE 600

ibrahim

I've used the cinema lua script using an external monitor. The issue I am having is to see the lower end of my footage. I know that there is a stretching going on vertically, which is why I cannot see the lower end of the filmed footage. Is there a way to say shrink the entire frame so that the lower end can be seen? Any other solution?
Canon 5D Mark IIIs | Ronin-M | Zeiss 50mm 1.4 planar | Zeiss 35mm 1.4 distagon  | Zeiss 24mm f2 distagon | Zeiss 85mm f1.4 planar
Dual sound system: Tascam DR-60d MKII | Audio Technica AT899 | Sennheiser MKE 600

Dmytro_ua

1. iso climb: in menu it is mentioned INFO(5D3), but it does nothing
2. x3crop toggle (halfshutter press (5d3)) in Press down or Set mode:   x10crop not compatible with x3toggle    - but i'm not in x10crop
5d3 1.2.3 | Canon 16-35 4.0L | Canon 50 1.4 | Canon 100mm 2.8 macro
Ronin-S | Feelworld F6 PLUS

DeafEyeJedi

Quote from: Dmytro_ua on October 15, 2019, 06:26:03 PM
There is a misprint for iso climb: in menu it is mentioned INFO(5D3), but it does nothing

Is this related to the 2019July20 or 2019Oct13 build from @Danne's bitbucket download page?
5D3.113 | 5D3.123 | EOSM.203 | 7D.203 | 70D.112 | 100D.101 | EOSM2.* | 50D.109

Dmytro_ua

5d3 1.2.3 | Canon 16-35 4.0L | Canon 50 1.4 | Canon 100mm 2.8 macro
Ronin-S | Feelworld F6 PLUS

Danne

New builds 5D3:
https://www.magiclantern.fm/forum/index.php?topic=23041.msg216899#msg216899

- Removed a few features due to lack of time bughunting
Removed: x3 crop toggle, iso climb.
All good stuff still in there so shouldn´t make any difference.

GullRaDriel

Thanks a lot for all the good job you're doing.

I'm testing a lot of your builds, and this one will be tested tonight. I'll be putting a review.

Danne, if you need me to test something special feel free to ask. As I'm a developer too I'll try to clone and build your version myself.


Danne

Ok, sounds good. General tests of the presets please go ahead. Not all sub menu items will work here and I am not up to date with this branch atm since I put all focus lately into the eos m. If you and others can find bugs and start working on fixes just go ahead. I will help out with pointers etc.

GullRaDriel

I've just tried to compile on debian testing, the classic unified branch for 5DM123.

I had to comment out the include module_strings, because the file is not present and it gives a compilation error.

Make zip made me a zip, I do not yet have a working qemu to test it, it'll come soon !

GullRaDriel

Edit:
Everything is working so far, with your branch build on my debian.

I don't get how I can correctly fork your branch and see it on bitbucket. We'll see what to do on that.

ozcancelik

Quote from: Danne on July 07, 2019, 02:55:59 PM
Part of the workaround technique. Framing is done from real buffer very slow and focusing can be done while holding halfshutter while recording. Then back into framing again. In and out. I can work with that and capture pretty much anything I want.

I tried  2019Oct15.5D3113 and 2019Oct15.5D3113. This feature is very very useful but sometimes(mostly) does not work for me. When it works and after pressing half shutter, it backs streched view again.

When I run your Lua script, everythings are fine and recording is ok. Low fps and laggy preview but at least not streched, framing is good. (I can get 5424x2270 24fps 10bit/12bit continuous)




When pressing half shutter for focusing:



And it stucks there. I can't see correct framed version again. Sometimes works 1-2 times, then streched view again. Also freezing camera when change aspect ratio on crop_rec menu.

Am I doing something wrong?
Thanks.